From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from charlotte.tuxdriver.com ([70.61.120.58]:34040 "EHLO smtp.tuxdriver.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751762AbYIZQ1T (ORCPT ); Fri, 26 Sep 2008 12:27:19 -0400 Date: Fri, 26 Sep 2008 12:26:44 -0400 From: "John W. Linville" To: Anna Neal Cc: linux-wireless@vger.kernel.org, libertas-dev@lists.infradead.org Subject: Re: [PATCH] libertas: Improvements on automatic tx power control via SIOCSIWTXPOW. Message-ID: <20080926162643.GB3483@tuxdriver.com> (sfid-20080926_182722_945258_C8C87536) References: <48dc2080.14be600a.433d.fffffde3@mx.google.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <48dc2080.14be600a.433d.fffffde3@mx.google.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: On Thu, Sep 25, 2008 at 04:19:31PM -0700, Anna Neal wrote: > iwconfig txpower can now be used to set tx power to fixed or auto. If set to > auto the default firmware settings are used. > > The command CMD_802_11_PA_CFG is only sent to older firmware, as Dan Williams > noted the command was no longer supported in firmware V9+. > > Signed-off-by: Anna Neal > Signed-off-by: Javier Cardona I had already committed an earlier version. I believe I have incorporated all the changes in "libertas: Improvements on automatic tx power control via SIOCSIWTXPOW (fixups)" -- please feel free to verify. Thanks, John -- John W. Linville Linux should be at the core linville@tuxdriver.com of your literate lifestyle.