From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from charlotte.tuxdriver.com ([70.61.120.58]:56829 "EHLO smtp.tuxdriver.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752311AbYI2VVb (ORCPT ); Mon, 29 Sep 2008 17:21:31 -0400 Date: Mon, 29 Sep 2008 17:20:45 -0400 From: "John W. Linville" To: Dan Williams Cc: Anna Neal , linux-wireless@vger.kernel.org, libertas-dev@lists.infradead.org Subject: Re: [PATCH] libertas: Improvements on automatic tx power control via SIOCSIWTXPOW. Message-ID: <20080929212045.GH3295@tuxdriver.com> (sfid-20080929_232135_640603_E63CED89) References: <48dc2080.14be600a.433d.fffffde3@mx.google.com> <20080926162643.GB3483@tuxdriver.com> <1222721977.27930.45.camel@localhost.localdomain> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <1222721977.27930.45.camel@localhost.localdomain> Sender: linux-wireless-owner@vger.kernel.org List-ID: On Mon, Sep 29, 2008 at 04:59:37PM -0400, Dan Williams wrote: > On Fri, 2008-09-26 at 12:26 -0400, John W. Linville wrote: > > On Thu, Sep 25, 2008 at 04:19:31PM -0700, Anna Neal wrote: > > > iwconfig txpower can now be used to set tx power to fixed or auto. If set to > > > auto the default firmware settings are used. > > > > > > The command CMD_802_11_PA_CFG is only sent to older firmware, as Dan Williams > > > noted the command was no longer supported in firmware V9+. > > > > > > Signed-off-by: Anna Neal > > > Signed-off-by: Javier Cardona > > > > I had already committed an earlier version. I believe I have > > incorporated all the changes in "libertas: Improvements on automatic tx > > power control via SIOCSIWTXPOW (fixups)" -- please feel free to verify. > > A few missing bits, sorry for the confusion. Merge fixups against > current wireless-testing below. > > Signed-off-by: Dan Williams Thanks Dan! I'll fold this into the patch before sending it upstream. John -- John W. Linville Linux should be at the core linville@tuxdriver.com of your literate lifestyle.