From: Christian Lamparter <chunkeey@web.de>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org,
John W Linville <linville@tuxdriver.com>,
Larry Finger <Larry.Finger@lwfinger.net>,
Pavel Roskin <proski@gnu.org>
Subject: [PATCH 2/3 v3] p54: put broadcast frames into the right queues
Date: Sat, 18 Oct 2008 23:18:44 +0200 [thread overview]
Message-ID: <200810182318.44880.chunkeey@web.de> (raw)
In-Reply-To: <1224332511.6324.3.camel@johannes.berg>
stlc45xx's specs finally brought some light what all the 4 extra queues for.
now CAB data and managment frames have their own queue.
Signed-off-by: Christian Lamparter <chunkeey@web.de>
---
diff -Nurp a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
--- a/drivers/net/wireless/p54/p54common.c 2008-10-18 21:25:46.000000000 +0200
+++ b/drivers/net/wireless/p54/p54common.c 2008-10-18 22:52:36.000000000 +0200
@@ -902,6 +902,55 @@ free:
}
EXPORT_SYMBOL_GPL(p54_read_eeprom);
+static int p54_tx_fill(struct ieee80211_hw *dev, struct sk_buff *skb,
+ struct ieee80211_tx_info *info, u8 *queue, size_t *extra_len,
+ u16 *flags, u16 *aid)
+{
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ struct p54_common *priv = dev->priv;
+ int ret = 0;
+
+ if (unlikely(ieee80211_is_mgmt(hdr->frame_control))) {
+ if (ieee80211_is_beacon(hdr->frame_control)) {
+ *aid = 0;
+ *queue = 0;
+ *extra_len = IEEE80211_MAX_TIM_LEN;
+ *flags = P54_HDR_FLAG_DATA_OUT_TIMESTAMP;
+ return 0;
+ } else if (ieee80211_is_probe_resp(hdr->frame_control)) {
+ *aid = 0;
+ *queue = 2;
+ *flags = P54_HDR_FLAG_DATA_OUT_TIMESTAMP |
+ P54_HDR_FLAG_DATA_OUT_NOCANCEL;
+ return 0;
+ } else {
+ *queue = 2;
+ ret = 0;
+ }
+ } else {
+ *queue += 4;
+ ret = 1;
+ }
+
+ switch (priv->mode) {
+ case NL80211_IFTYPE_STATION:
+ *aid = 1;
+ break;
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_ADHOC:
+ if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) {
+ *aid = 0;
+ *queue = 3;
+ return 0;
+ }
+ if (info->control.sta)
+ *aid = info->control.sta->aid;
+ else
+ *flags = P54_HDR_FLAG_DATA_OUT_NOCANCEL;
+ }
+ return ret;
+}
+
static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
@@ -909,22 +958,26 @@ static int p54_tx(struct ieee80211_hw *d
struct p54_common *priv = dev->priv;
struct p54_hdr *hdr;
struct p54_tx_data *txhdr;
- size_t padding, len;
+ size_t padding, len, tim_len;
int i, j, ridx;
- u16 hdr_flags = 0;
- u8 rate;
+ u16 hdr_flags = 0, aid = 0;
+ u8 rate, queue;
u8 cts_rate = 0x20;
u8 rc_flags;
u8 calculated_tries[4];
u8 nrates = 0, nremaining = 8;
- current_queue = &priv->tx_stats[skb_get_queue_mapping(skb) + 4];
- if (unlikely(current_queue->len > current_queue->limit))
- return NETDEV_TX_BUSY;
- current_queue->len++;
- current_queue->count++;
- if (current_queue->len == current_queue->limit)
- ieee80211_stop_queue(dev, skb_get_queue_mapping(skb));
+ queue = skb_get_queue_mapping(skb);
+
+ if (p54_tx_fill(dev, skb, info, &queue, &tim_len, &hdr_flags, &aid)) {
+ current_queue = &priv->tx_stats[queue];
+ if (unlikely(current_queue->len > current_queue->limit))
+ return NETDEV_TX_BUSY;
+ current_queue->len++;
+ current_queue->count++;
+ if (current_queue->len == current_queue->limit)
+ ieee80211_stop_queue(dev, skb_get_queue_mapping(skb));
+ }
padding = (unsigned long)(skb->data - (sizeof(*hdr) + sizeof(*txhdr))) & 3;
len = skb->len;
@@ -935,7 +988,7 @@ static int p54_tx(struct ieee80211_hw *d
if (padding)
hdr_flags |= P54_HDR_FLAG_DATA_ALIGN;
hdr->len = cpu_to_le16(len);
- hdr->type = (info->flags & IEEE80211_TX_CTL_NO_ACK) ? 0 : cpu_to_le16(1);
+ hdr->type = cpu_to_le16(aid);
hdr->rts_tries = info->control.rates[0].count;
/*
@@ -1013,7 +1066,7 @@ static int p54_tx(struct ieee80211_hw *d
txhdr->rts_rate_idx = 0;
txhdr->key_type = 0;
txhdr->key_len = 0;
- txhdr->hw_queue = skb_get_queue_mapping(skb) + 4;
+ txhdr->hw_queue = queue;
txhdr->backlog = 32;
memset(txhdr->durations, 0, sizeof(txhdr->durations));
txhdr->tx_antenna = (info->antenna_sel_tx == 0) ?
@@ -1024,7 +1077,7 @@ static int p54_tx(struct ieee80211_hw *d
txhdr->align[0] = padding;
/* modifies skb->cb and with it info, so must be last! */
- if (unlikely(p54_assign_address(dev, skb, hdr, skb->len))) {
+ if (unlikely(p54_assign_address(dev, skb, hdr, skb->len + tim_len))) {
skb_pull(skb, sizeof(*hdr) + sizeof(*txhdr) + padding);
if (current_queue) {
current_queue->len--;
@@ -1509,8 +1562,7 @@ struct ieee80211_hw *p54_init_common(siz
priv = dev->priv;
priv->mode = NL80211_IFTYPE_UNSPECIFIED;
skb_queue_head_init(&priv->tx_queue);
- dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | /* not sure */
- IEEE80211_HW_RX_INCLUDES_FCS |
+ dev->flags = IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
next prev parent reply other threads:[~2008-10-18 21:14 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-16 23:15 [PATCH 2/3] p54: put broadcast frames into the right queues Christian Lamparter
2008-10-17 1:54 ` [PATCH 2/3 v2] " Christian Lamparter
2008-10-18 12:21 ` Johannes Berg
2008-10-18 21:04 ` Christian Lamparter
2008-10-18 21:18 ` Christian Lamparter [this message]
2008-10-22 21:20 ` [PATCH 2/3 v3] " John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200810182318.44880.chunkeey@web.de \
--to=chunkeey@web.de \
--cc=Larry.Finger@lwfinger.net \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=proski@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).