linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jouni Malinen <j@w1.fi>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: Johannes Berg <johannes@sipsolutions.net>,
	linux-wireless@vger.kernel.org
Subject: [PATCHv2 2/5] nl80211: Add basic rate configuration for AP mode
Date: Thu, 30 Oct 2008 16:59:22 +0200	[thread overview]
Message-ID: <20081030150209.478795959@localhost> (raw)
In-Reply-To: 20081030145920.233178987@localhost

Add a new attribute, NL80211_ATTR_BSS_BASIC_RATES, that can be used with
NL80211_CMD_SET_BSS for userspace (e.g., hostapd) to set which rates are
in the basic rate set.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

Index: wireless-testing/include/linux/nl80211.h
===================================================================
--- wireless-testing.orig/include/linux/nl80211.h	2008-10-28 19:50:57.000000000 +0200
+++ wireless-testing/include/linux/nl80211.h	2008-10-28 19:57:07.000000000 +0200
@@ -243,6 +243,9 @@
  *	(u8, 0 or 1)
  * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
  *	(u8, 0 or 1)
+ * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
+ *	rates in format defined by IEEE 802.11 7.3.2.2 but without the length
+ *	restriction (at most %NL80211_MAX_SUPP_RATES).
  *
  * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
  *	association request when used with NL80211_CMD_NEW_STATION)
@@ -307,6 +310,8 @@
 
 	NL80211_ATTR_MESH_PARAMS,
 
+	NL80211_ATTR_BSS_BASIC_RATES,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -318,6 +323,7 @@
  * here
  */
 #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
+#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
 
 #define NL80211_MAX_SUPP_RATES			32
 #define NL80211_MAX_SUPP_REG_RULES		32
Index: wireless-testing/include/net/cfg80211.h
===================================================================
--- wireless-testing.orig/include/net/cfg80211.h	2008-10-28 19:59:34.000000000 +0200
+++ wireless-testing/include/net/cfg80211.h	2008-10-28 20:00:43.000000000 +0200
@@ -280,11 +280,16 @@
  *	(0 = no, 1 = yes, -1 = do not change)
  * @use_short_slot_time: Whether the use of short slot time is allowed
  *	(0 = no, 1 = yes, -1 = do not change)
+ * @basic_rates: basic rates in IEEE 802.11 format
+ *	(or NULL for no change)
+ * @basic_rates_len: number of basic rates
  */
 struct bss_parameters {
 	int use_cts_prot;
 	int use_short_preamble;
 	int use_short_slot_time;
+	u8 *basic_rates;
+	u8 basic_rates_len;
 };
 
 /**
Index: wireless-testing/net/mac80211/cfg.c
===================================================================
--- wireless-testing.orig/net/mac80211/cfg.c	2008-10-28 20:01:20.000000000 +0200
+++ wireless-testing/net/mac80211/cfg.c	2008-10-28 20:20:42.000000000 +0200
@@ -1048,6 +1048,24 @@
 		changed |= BSS_CHANGED_ERP_SLOT;
 	}
 
+	if (params->basic_rates) {
+		int i, j;
+		u32 rates = 0;
+		struct ieee80211_local *local = wiphy_priv(wiphy);
+		struct ieee80211_supported_band *sband =
+			wiphy->bands[local->oper_channel->band];
+
+		for (i = 0; i < params->basic_rates_len; i++) {
+			int rate = (params->basic_rates[i] & 0x7f) * 5;
+			for (j = 0; j < sband->n_bitrates; j++) {
+				if (sband->bitrates[j].bitrate == rate)
+					rates |= BIT(j);
+			}
+		}
+		sdata->vif.bss_conf.basic_rates = rates;
+		changed |= BSS_CHANGED_BASIC_RATES;
+	}
+
 	ieee80211_bss_info_change_notify(sdata, changed);
 
 	return 0;
Index: wireless-testing/net/wireless/nl80211.c
===================================================================
--- wireless-testing.orig/net/wireless/nl80211.c	2008-10-28 19:56:53.000000000 +0200
+++ wireless-testing/net/wireless/nl80211.c	2008-10-28 19:59:00.000000000 +0200
@@ -95,6 +95,8 @@
 	[NL80211_ATTR_BSS_CTS_PROT] = { .type = NLA_U8 },
 	[NL80211_ATTR_BSS_SHORT_PREAMBLE] = { .type = NLA_U8 },
 	[NL80211_ATTR_BSS_SHORT_SLOT_TIME] = { .type = NLA_U8 },
+	[NL80211_ATTR_BSS_BASIC_RATES] = { .type = NLA_BINARY,
+					   .len = NL80211_MAX_SUPP_RATES },
 
 	[NL80211_ATTR_MESH_PARAMS] = { .type = NLA_NESTED },
 
@@ -1613,6 +1615,12 @@
 	if (info->attrs[NL80211_ATTR_BSS_SHORT_SLOT_TIME])
 		params.use_short_slot_time =
 		    nla_get_u8(info->attrs[NL80211_ATTR_BSS_SHORT_SLOT_TIME]);
+	if (info->attrs[NL80211_ATTR_BSS_BASIC_RATES]) {
+		params.basic_rates =
+			nla_data(info->attrs[NL80211_ATTR_BSS_BASIC_RATES]);
+		params.basic_rates_len =
+			nla_len(info->attrs[NL80211_ATTR_BSS_BASIC_RATES]);
+	}
 
 	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)

--

-- 
Jouni Malinen                                            PGP id EFC895FA

  parent reply	other threads:[~2008-10-30 15:03 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-10-30 14:59 [PATCHv2 0/5] mac80211/cfg80211/hwsim: Basic rate and TXQ params Jouni Malinen
2008-10-30 14:59 ` [PATCHv2 1/5] mac80211_hwsim: Debug info for BSS config changes Jouni Malinen
2008-10-30 14:59 ` Jouni Malinen [this message]
2008-10-30 14:59 ` [PATCHv2 3/5] mac80211_hwsim: Debug info for TX queue parameters Jouni Malinen
2008-10-30 14:59 ` [PATCHv2 4/5] nl80211: Add TX queue parameter configuration Jouni Malinen
2008-10-30 14:59 ` [PATCHv2 5/5] mac80211_hwsim: Make sure beacon_timer gets deleted Jouni Malinen
2008-10-30 15:08   ` Johannes Berg
2008-10-30 15:41     ` Jouni Malinen
2008-10-30 15:09 ` [PATCHv2 0/5] mac80211/cfg80211/hwsim: Basic rate and TXQ params Johannes Berg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20081030150209.478795959@localhost \
    --to=j@w1.fi \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).