[PATCH] rt2x00: Don't switch off LED on initialization

[Ivo van Doorn <ivdoorn@gmail.com>]

When we switch off the LEDS during initialization
we kill rt73usb from proper functioning. The immediate
result after the first LED command are MCU failures
and a complete breakdown of TX/RX.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
 drivers/net/wireless/rt2x00/rt2x00leds.c |    6 ------
 1 files changed, 0 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.c b/drivers/net/wireless/rt2x00/rt2x00leds.c
index 66c61b1..68f4e0f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00leds.c
+++ b/drivers/net/wireless/rt2x00/rt2x00leds.c
@@ -111,12 +111,6 @@ static int rt2x00leds_register_led(struct rt2x00_dev *rt2x00dev,
 	led->led_dev.name = name;
 	led->led_dev.brightness = LED_OFF;
 
-	/*
-	 * Ensure the LED is off, it might have been enabled
-	 * by the hardware when the device was powered on.
-	 */
-	led->led_dev.brightness_set(&led->led_dev, LED_OFF);
-
 	retval = led_classdev_register(device, &led->led_dev);
 	if (retval) {
 		ERROR(rt2x00dev, "Failed to register led handler.\n");
-- 
1.5.6.1