* iwlagn driver segfault in 2.6.28-rc3 @ 2008-11-11 14:34 Lukas Hejtmanek 2008-11-13 7:07 ` reinette chatre 0 siblings, 1 reply; 11+ messages in thread From: Lukas Hejtmanek @ 2008-11-11 14:34 UTC (permalink / raw) To: linux-kernel, linux-wireless; +Cc: ipw3945-devel Hello, I accidentaly got the following oops: [54644.622141] wlan0: association with AP 00:13:80:43:9d:d0 timed out [54655.006025] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) ->= IRQ 17 [54655.006444] iwlagn 0000:03:00.0: irq 40 for MSI/MSI-X [54655.006715] general protection fault: 0000 [#1] SMP=20 [54655.006723] last sysfs file: /sys/devices/pci0000:00/0000:00:1f.1/ho= st3/target3:0:0/3:0:0:0/block/sr0/stat [54655.006728] Dumping ftrace buffer: [54655.006733] (ftrace buffer empty) [54655.006737] CPU 0=20 [54655.006740] Modules linked in: aes_x86_64 aes_generic arc4 ecb iwlag= n iwlcore mac80211 cfg80211 i915 drm rfcomm bri dge stp llc bnep sco l2cap tp_smapi thinkpad_ec btusb bluetooth fuse th= inkpad_acpi rfkill e1000e wmi intel_agp snd_hda_intel [last unloaded: e= hci_hcd] [54655.006785] Pid: 13515, comm: wpa_supplicant Not tainted 2.6.28-rc3 = #27 [54655.006789] RIP: 0010:[<ffffffffa0149db7>] [<ffffffffa0149db7>] iwl= _eeprom_query16+0x7/0x20 [iwlcore] [54655.006813] RSP: 0018:ffff8800618f5b40 EFLAGS: 00010092 [54655.006817] RAX: 7fff880074655400 RBX: ffff88007c02d000 RCX: 0000000= 0800300f0 [54655.006822] RDX: 0000000000000cfc RSI: 0000000000000090 RDI: ffff880= 061801940 [54655.006826] RBP: ffff880061801940 R08: 0000000000000002 R09: ffff880= 0618f5b0c [54655.006831] R10: 0000000000000000 R11: ffffffff804a1010 R12: 0000000= 000080006 [54655.006835] R13: ffff880061802a60 R14: ffff880061802390 R15: 0000000= 000000296 [54655.006841] FS: 00007f27c48fb6f0(0000) GS:ffffffff806ed240(0000) kn= lGS:0000000000000000 [54655.006846] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [54655.006850] CR2: 0000000000446f50 CR3: 0000000055115000 CR4: 0000000= 0000006e0 [54655.006855] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000= 000000000 [54655.006859] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000= 000000400 [54655.006865] Process wpa_supplicant (pid: 13515, threadinfo ffff88006= 18f4000, task ffff8800614142c0) [54655.006869] Stack: [54655.006872] ffffffffa01cd782 ffffffff806d6148 0000000000000000 0000= 000000000296 [54655.006880] 0000000000000000 0143000000000000 ffff88007c02d000 ffff= 880061801940 [54655.006888] ffff880061802390 ffff880061802a60 0000000000000292 ffff= 8800618f5d3c [54655.006898] Call Trace: [54655.006901] [<ffffffffa01cd782>] ? iwl4965_nic_config+0xb2/0x3b0 [i= wlagn] [54655.006921] [<ffffffffa0147619>] ? iwl_hw_nic_init+0xa9/0x1f0 [iwlc= ore] [54655.006939] [<ffffffffa01c1110>] ? __iwl4965_up+0xd0/0x740 [iwlagn] [54655.006953] [<ffffffffa01c1ee8>] ? iwl4965_mac_start+0x3c8/0x1190 [= iwlagn] [54655.006968] [<ffffffff80282a10>] ? find_lock_page+0x30/0x80 [54655.006978] [<ffffffff80284260>] ? filemap_fault+0x1c0/0x430 [54655.006986] [<ffffffffa01271e9>] ? ieee80211_open+0x309/0x850 [mac8= 0211] [54655.007010] [<ffffffff804b4e5a>] ? dev_open+0xba/0x100 [54655.007018] [<ffffffff804b42e4>] ? dev_change_flags+0x94/0x1e0 [54655.007025] [<ffffffff804fa1b3>] ? devinet_ioctl+0x683/0x6e0 [54655.007034] [<ffffffff804a41d6>] ? sock_ioctl+0x66/0x270 [54655.007042] [<ffffffff802bdf2f>] ? vfs_ioctl+0x2f/0xb0 [54655.007049] [<ffffffff802be02c>] ? do_vfs_ioctl+0x7c/0x470 [54655.007055] [<ffffffff802ae26e>] ? fd_install+0x2e/0x60 [54655.007063] [<ffffffff802be469>] ? sys_ioctl+0x49/0x80 [54655.007069] [<ffffffff80530ef9>] ? error_exit+0x0/0x51 [54655.007076] [<ffffffff8020c4cb>] ? system_call_fastpath+0x16/0x1b [54655.007085] Code: 00 00 00 00 48 8b 47 18 48 8b 40 18 48 8b 00 4c 8b= 98 00 01 00 00 41 ff e3 66 66 2e 0f 1f 84 00 00 00 00 00 48 8b 87 00 2= 3 01 00 <0f> b6 54 30 01 0f b6 04 30 c1 e2 08 09 d0 c3 66 2e 0f 1f 84 0= 0=20 [54655.007151] RIP [<ffffffffa0149db7>] iwl_eeprom_query16+0x7/0x20 [i= wlcore] [54655.007169] RSP <ffff8800618f5b40> [54655.007174] ---[ end trace d9d4018bdc964b95 ]--- --=20 Luk=E1=B9 Hejtm=E1nek -- To unsubscribe from this list: send the line "unsubscribe linux-wireles= s" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: iwlagn driver segfault in 2.6.28-rc3 2008-11-11 14:34 iwlagn driver segfault in 2.6.28-rc3 Lukas Hejtmanek @ 2008-11-13 7:07 ` reinette chatre 2008-11-16 12:06 ` Carlos R. Mafra 0 siblings, 1 reply; 11+ messages in thread From: reinette chatre @ 2008-11-13 7:07 UTC (permalink / raw) To: Lukas Hejtmanek Cc: linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org, ipw3945-devel@lists.sourceforge.net On Tue, 2008-11-11 at 06:34 -0800, Lukas Hejtmanek wrote: > Hello, > > I accidentaly got the following oops: > > [54644.622141] wlan0: association with AP 00:13:80:43:9d:d0 timed out > [54655.006025] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > [54655.006444] iwlagn 0000:03:00.0: irq 40 for MSI/MSI-X > [54655.006715] general protection fault: 0000 [#1] SMP > [54655.006723] last sysfs file: /sys/devices/pci0000:00/0000:00:1f.1/host3/target3:0:0/3:0:0:0/block/sr0/stat > [54655.006728] Dumping ftrace buffer: > [54655.006733] (ftrace buffer empty) > [54655.006737] CPU 0 > [54655.006740] Modules linked in: aes_x86_64 aes_generic arc4 ecb iwlagn iwlcore mac80211 cfg80211 i915 drm rfcomm bri > dge stp llc bnep sco l2cap tp_smapi thinkpad_ec btusb bluetooth fuse thinkpad_acpi rfkill e1000e wmi intel_agp snd_hda_intel [last unloaded: ehci_hcd] > [54655.006785] Pid: 13515, comm: wpa_supplicant Not tainted 2.6.28-rc3 #27 > [54655.006789] RIP: 0010:[<ffffffffa0149db7>] [<ffffffffa0149db7>] iwl_eeprom_query16+0x7/0x20 [iwlcore] > I do not know why the eeprom will not be available at this point. Could you please try the patch below and let us know if you hit the error? diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index db31a52..307b77e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2585,6 +2585,10 @@ static int iwl4965_mac_start(struct ieee80211_hw *hw) IWL_DEBUG_MAC80211("enter\n"); + if (!priv->eeprom) { + IWL_ERROR("EEPROM not initialized.\n"); + return -EIO; + } if (pci_enable_device(priv->pci_dev)) { IWL_ERROR("Fail to pci_enable_device\n"); return -ENODEV; ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: iwlagn driver segfault in 2.6.28-rc3 2008-11-13 7:07 ` reinette chatre @ 2008-11-16 12:06 ` Carlos R. Mafra 2008-11-16 12:29 ` Tomas Winkler 2008-11-16 17:47 ` reinette chatre 0 siblings, 2 replies; 11+ messages in thread From: Carlos R. Mafra @ 2008-11-16 12:06 UTC (permalink / raw) To: reinette chatre Cc: Lukas Hejtmanek, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org, ipw3945-devel@lists.sourceforge.net I just got (another) one of this too. The wireless connection suddenly lost the AP and I was waiting for ifplugd to reconnect to it again automatically, as it always does. After waiting for one or two minutes I decided to 'modprobe -r iwlagn' but this command never returned (it got stuck). Then I looked at the end of dmesg and found this: general protection fault: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq CPU 1 Modules linked in: nls_iso8859_1 nls_cp437 vfat fat usb_storage xt_comment xt_policy xt_tcpmss xt_pkttype xt_owner xt_NFQUEUE xt_NFLOG xt_multiport xt_MARK xt_mark xt_mac xt_limit xt_length xt_iprange xt_hashlimit xt_dscp xt_dccp xt_CLASSIFY snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss nvram ohci1394 ieee1394 snd_hda_intel uvcvideo snd_pcm sg sky2 i2c_i801 sr_mod iwlagn compat_ioctl32 snd_timer evdev videodev snd_page_alloc v4l1_compat snd_hwdep ata_piix ahci libata sd_mod scsi_mod uhci_hcd ohci_hcd ehci_hcd usbcore [last unloaded: scsi_wait_scan] Pid: 3163, comm: ifplugd Not tainted 2.6.28-rc4-keypress-00322-g58e20d8 #14 RIP: 0010:[<ffffffff803d844b>] [<ffffffff803d844b>] iwl_eeprom_query16+0xb/0x20 RSP: 0018:ffff88007b631a88 EFLAGS: 00010092 RAX: 7fff88007dfd5400 RBX: ffff88007d81a000 RCX: 00000000800600f0 RDX: 0000000000000cfc RSI: 0000000000000090 RDI: ffff88007dcc1940 RBP: ffff88007b631a88 R08: 0000000000000002 R09: ffff88007b631a5c R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000080006 R13: ffff88007dcc1940 R14: ffff88007dcc29f8 R15: ffff88007d81a740 FS: 00007f7f93ef16f0(0000) GS:ffff88007f0686c0(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00002ad88fdfd000 CR3: 000000007d935000 CR4: 00000000000006a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process ifplugd (pid: 3163, threadinfo ffff88007b630000, task ffff88007b5ba980) Stack: ffff88007b631af8 ffffffffa0108526 ffff88007b631af8 ffffffffa00f3aaf 0000000000000000 ffff88007dcc2328 0000000000000292 0000000000000000 0143000000000000 ffff88007d81a000 ffff88007dcc1940 ffff88007dcc2328 Call Trace: [<ffffffffa0108526>] iwl4965_nic_config+0xa6/0x380 [iwlagn] [<ffffffffa00f3aaf>] ? iwl4965_set_pwr_src+0x1cf/0x3d0 [iwlagn] [<ffffffff803d5a9b>] iwl_hw_nic_init+0x11b/0x1d0 [<ffffffffa00fbe17>] __iwl4965_up+0x1a7/0x720 [iwlagn] [<ffffffffa00fd0c8>] iwl4965_mac_start+0xd38/0x1570 [iwlagn] [<ffffffff8022d365>] ? __wake_up_sync+0x55/0x70 [<ffffffff8043000f>] ? sock_def_readable+0x6f/0x80 [<ffffffff8049b893>] ? unix_dgram_sendmsg+0x463/0x4f0 [<ffffffff804b5cf8>] ieee80211_open+0x328/0x830 [<ffffffff8042bf5b>] ? sock_sendmsg+0xdb/0xf0 [<ffffffff8043cba4>] dev_open+0x64/0xc0 [<ffffffff8043ba71>] dev_change_flags+0x91/0x1b0 [<ffffffff8047fde3>] devinet_ioctl+0x5b3/0x750 [<ffffffff8048096d>] inet_ioctl+0x6d/0x90 [<ffffffff8042c4d5>] sock_ioctl+0xc5/0x240 [<ffffffff802a60f1>] vfs_ioctl+0x31/0x90 [<ffffffff802a647b>] do_vfs_ioctl+0x32b/0x460 [<ffffffff802a65fa>] sys_ioctl+0x4a/0x80 [<ffffffff8020c1fb>] system_call_fastpath+0x16/0x1b Code: 48 8b 47 18 55 48 89 e5 48 8b 40 18 48 8b 00 ff 90 00 01 00 00 c9 c3 66 0f 1f 84 00 00 00 00 00 48 8b 87 98 22 01 00 55 48 89 e5 <0f> b6 54 06 01 0f b6 04 30 c9 c1 e2 08 09 d0 0f b7 c0 c3 66 90 RIP [<ffffffff803d844b>] iwl_eeprom_query16+0xb/0x20 RSP <ffff88007b631a88> ---[ end trace 28eaede31d178563 ]--- I tried to reboot but it got stuck too, so I had to SysRq+b. >From now on I will apply Reinette's patch and wait for it to happen again (but it seldom happens). ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: iwlagn driver segfault in 2.6.28-rc3 2008-11-16 12:06 ` Carlos R. Mafra @ 2008-11-16 12:29 ` Tomas Winkler 2008-11-16 12:51 ` Carlos R. Mafra 2008-11-16 17:47 ` reinette chatre 1 sibling, 1 reply; 11+ messages in thread From: Tomas Winkler @ 2008-11-16 12:29 UTC (permalink / raw) To: Carlos R. Mafra Cc: reinette chatre, Lukas Hejtmanek, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org, ipw3945-devel@lists.sourceforge.net On Sun, Nov 16, 2008 at 2:06 PM, Carlos R. Mafra <crmafra2@gmail.com> wrote: > I just got (another) one of this too. > > The wireless connection suddenly lost the AP and I was waiting > for ifplugd to reconnect to it again automatically, as it always > does. > > After waiting for one or two minutes I decided to 'modprobe -r > iwlagn' but this command never returned (it got stuck). > > Then I looked at the end of dmesg and found this: Did you happen to have logs open so I can see what happen prior to that We found out that this is due to double removal of an encryption key but I still haven't see the exact flow. Thanks Tomas > > general protection fault: 0000 [#1] SMP > last sysfs file: /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq > CPU 1 > Modules linked in: nls_iso8859_1 nls_cp437 vfat fat usb_storage xt_comment xt_policy xt_tcpmss xt_pkttype xt_owner xt_NFQUEUE xt_NFLOG xt_multiport xt_MARK xt_mark xt_mac xt_limit xt_length xt_iprange xt_hashlimit xt_dscp xt_dccp xt_CLASSIFY snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss nvram ohci1394 ieee1394 snd_hda_intel uvcvideo snd_pcm sg sky2 i2c_i801 sr_mod iwlagn compat_ioctl32 snd_timer evdev videodev snd_page_alloc v4l1_compat snd_hwdep ata_piix ahci libata sd_mod scsi_mod uhci_hcd ohci_hcd ehci_hcd usbcore [last unloaded: scsi_wait_scan] > Pid: 3163, comm: ifplugd Not tainted 2.6.28-rc4-keypress-00322-g58e20d8 #14 > RIP: 0010:[<ffffffff803d844b>] [<ffffffff803d844b>] iwl_eeprom_query16+0xb/0x20 > RSP: 0018:ffff88007b631a88 EFLAGS: 00010092 > RAX: 7fff88007dfd5400 RBX: ffff88007d81a000 RCX: 00000000800600f0 > RDX: 0000000000000cfc RSI: 0000000000000090 RDI: ffff88007dcc1940 > RBP: ffff88007b631a88 R08: 0000000000000002 R09: ffff88007b631a5c > R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000080006 > R13: ffff88007dcc1940 R14: ffff88007dcc29f8 R15: ffff88007d81a740 > FS: 00007f7f93ef16f0(0000) GS:ffff88007f0686c0(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > CR2: 00002ad88fdfd000 CR3: 000000007d935000 CR4: 00000000000006a0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Process ifplugd (pid: 3163, threadinfo ffff88007b630000, task ffff88007b5ba980) > Stack: > ffff88007b631af8 ffffffffa0108526 ffff88007b631af8 ffffffffa00f3aaf > 0000000000000000 ffff88007dcc2328 0000000000000292 0000000000000000 > 0143000000000000 ffff88007d81a000 ffff88007dcc1940 ffff88007dcc2328 > Call Trace: > [<ffffffffa0108526>] iwl4965_nic_config+0xa6/0x380 [iwlagn] > [<ffffffffa00f3aaf>] ? iwl4965_set_pwr_src+0x1cf/0x3d0 [iwlagn] > [<ffffffff803d5a9b>] iwl_hw_nic_init+0x11b/0x1d0 > [<ffffffffa00fbe17>] __iwl4965_up+0x1a7/0x720 [iwlagn] > [<ffffffffa00fd0c8>] iwl4965_mac_start+0xd38/0x1570 [iwlagn] > [<ffffffff8022d365>] ? __wake_up_sync+0x55/0x70 > [<ffffffff8043000f>] ? sock_def_readable+0x6f/0x80 > [<ffffffff8049b893>] ? unix_dgram_sendmsg+0x463/0x4f0 > [<ffffffff804b5cf8>] ieee80211_open+0x328/0x830 > [<ffffffff8042bf5b>] ? sock_sendmsg+0xdb/0xf0 > [<ffffffff8043cba4>] dev_open+0x64/0xc0 > [<ffffffff8043ba71>] dev_change_flags+0x91/0x1b0 > [<ffffffff8047fde3>] devinet_ioctl+0x5b3/0x750 > [<ffffffff8048096d>] inet_ioctl+0x6d/0x90 > [<ffffffff8042c4d5>] sock_ioctl+0xc5/0x240 > [<ffffffff802a60f1>] vfs_ioctl+0x31/0x90 > [<ffffffff802a647b>] do_vfs_ioctl+0x32b/0x460 > [<ffffffff802a65fa>] sys_ioctl+0x4a/0x80 > [<ffffffff8020c1fb>] system_call_fastpath+0x16/0x1b > Code: 48 8b 47 18 55 48 89 e5 48 8b 40 18 48 8b 00 ff 90 00 01 00 00 c9 c3 66 0f 1f 84 00 00 00 00 00 48 8b 87 98 22 01 00 55 48 89 e5 <0f> b6 54 06 01 0f b6 04 30 c9 c1 e2 08 09 d0 0f b7 c0 c3 66 90 > RIP [<ffffffff803d844b>] iwl_eeprom_query16+0xb/0x20 > RSP <ffff88007b631a88> > ---[ end trace 28eaede31d178563 ]--- > > > I tried to reboot but it got stuck too, so I had to SysRq+b. > > From now on I will apply Reinette's patch and wait for it to > happen again (but it seldom happens). > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: iwlagn driver segfault in 2.6.28-rc3 2008-11-16 12:29 ` Tomas Winkler @ 2008-11-16 12:51 ` Carlos R. Mafra 2008-11-16 23:54 ` Tomas Winkler 0 siblings, 1 reply; 11+ messages in thread From: Carlos R. Mafra @ 2008-11-16 12:51 UTC (permalink / raw) To: Tomas Winkler Cc: reinette chatre, Lukas Hejtmanek, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org, ipw3945-devel@lists.sourceforge.net On Sun 16.Nov'08 at 14:29:12 +0200, Tomas Winkler wrote: > On Sun, Nov 16, 2008 at 2:06 PM, Carlos R. Mafra <crmafra2@gmail.com> wrote: > > I just got (another) one of this too. > > > > The wireless connection suddenly lost the AP and I was waiting > > for ifplugd to reconnect to it again automatically, as it always > > does. > > > > After waiting for one or two minutes I decided to 'modprobe -r > > iwlagn' but this command never returned (it got stuck). > > > > Then I looked at the end of dmesg and found this: > > Did you happen to have logs open so I can see what happen prior to that > We found out that this is due to double removal of an encryption key > but I still haven't see the exact flow. Here is the whole dmesg which I saved after that GPF. It is a bit bit because I had already suspended to ram a few times (which is working _fine_, btw) BIOS EBDA/lowmem at: 0009f800/0009f800 Linux version 2.6.28-rc4-keypress-00322-g58e20d8 (mafra@localhost) (gcc version 4.2.3 (4.2.3-6mnb1)) #14 SMP Fri Nov 14 00:02:57 CET 2008 Command line: BOOT_IMAGE=2628-rc4-keypress-00322-g58e20d root=UUID=019b9dde-30e6-11dd-b550-3d3d11ee558f resume=/dev/sda6 splash=silent vga=0x0364 KERNEL supported cpus: Intel GenuineIntel BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable) BIOS-e820: 000000007f6d0000 - 000000007f6e0000 (ACPI data) BIOS-e820: 000000007f6e0000 - 000000007f6e3000 (ACPI NVS) BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x7f6d0 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping: 0000000000000000-000000007f6d0000 0000000000 - 007f600000 page 2M 007f600000 - 007f6d0000 page 4k kernel direct mapping tables up to 7f6d0000 @ 8000-c000 last_map_addr: 7f6d0000 end: 7f6d0000 RAMDISK: 37dc9000 - 37fef347 ACPI: RSDP 000F8060, 0024 (r2 PTLTD ) ACPI: XSDT 7F6D7E0E, 008C (r1 Sony VAIO 20070704 PTL 0) ACPI: FACP 7F6DFC04, 00F4 (r3 Sony VAIO 20070704 PTL 1) ACPI: DSDT 7F6D9217, 6979 (r2 Sony VAIO 20070704 PTL 20050624) ACPI: FACS 7F6E2FC0, 0040 ACPI: APIC 7F6DFCF8, 0068 (r1 Sony VAIO 20070704 PTL 5A) ACPI: HPET 7F6DFD60, 0038 (r1 Sony VAIO 20070704 PTL 5A) ACPI: MCFG 7F6DFD98, 003C (r1 Sony VAIO 20070704 PTL 5A) ACPI: SLIC 7F6DFDD4, 0176 (r1 Sony VAIO 20070704 PTL 1000000) ACPI: TMOR 7F6DFF4A, 0026 (r1 Sony VAIO 20070704 PTL 3) ACPI: APIC 7F6DFF70, 0068 (r1 Sony VAIO 20070704 PTL 0) ACPI: BOOT 7F6DFFD8, 0028 (r1 Sony VAIO 20070704 PTL 1) ACPI: SSDT 7F6D90FA, 011D (r1 Sony VAIO 20070704 PTL 20050624) ACPI: SSDT 7F6D8FD7, 0123 (r1 Sony VAIO 20070704 PTL 20050624) ACPI: SSDT 7F6D8482, 0287 (r1 Sony VAIO 20070704 PTL 20050624) ACPI: SSDT 7F6D83CE, 00B4 (r1 Sony VAIO 20070704 PTL 20050624) ACPI: SSDT 7F6D7E9A, 0534 (r1 Sony VAIO 20070704 PTL 20050624) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: DMI detected: Sony ACPI: Local APIC address 0xfee00000 (6 early reservations) ==> bootmem [0000000000 - 007f6d0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000746690] TEXT DATA BSS ==> [0000200000 - 0000746690] #3 [0037dc9000 - 0037fef347] RAMDISK ==> [0037dc9000 - 0037fef347] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007f6d0 On node 0 totalpages: 521839 DMA zone: 56 pages used for memmap DMA zone: 1451 pages reserved DMA zone: 2492 pages, LIFO batch:0 DMA32 zone: 7080 pages used for memmap DMA32 zone: 510760 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) PERCPU: Allocating 45056 bytes of per cpu data NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513252 Kernel command line: BOOT_IMAGE=2628-rc4-keypress-00322-g58e20d root=UUID=019b9dde-30e6-11dd-b550-3d3d11ee558f resume=/dev/sda6 splash=silent vga=0x0364 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 1995.352 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 2047292k/2087744k available (2911k kernel code, 388k absent, 39592k reserved, 1516k data, 320k init) hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.98 BogoMIPS (lpj=6651173) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20080926 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3991.24 BogoMIPS (lpj=6649999) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (7983.23 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 net_namespace: 856 bytes NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored via DMI ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0xfc000000-0xfc0fffff] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] pci 0000:00:02.1: reg 10 64bit mmio: [0xfc100000-0xfc1fffff] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc604800-0xfc604bff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc400000-0xfc403fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc604c00-0xfc604fff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] pci 0000:00:1f.2: reg 10 io port: [0x1c00-0x1c07] pci 0000:00:1f.2: reg 14 io port: [0x18d4-0x18d7] pci 0000:00:1f.2: reg 18 io port: [0x18d8-0x18df] pci 0000:00:1f.2: reg 1c io port: [0x18d0-0x18d3] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc604000-0xfc6047ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] pci 0000:00:1c.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xf9ffffff] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff] pci 0000:06:00.0: reg 10 64bit mmio: [0xfa000000-0xfa001fff] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold pci 0000:06:00.0: PME# disabled pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff] pci 0000:00:1c.2: bridge 32bit mmio: [0xfa000000-0xfbffffff] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4000000-0xf5ffffff] pci 0000:08:00.0: reg 10 64bit mmio: [0xfc200000-0xfc203fff] pci 0000:08:00.0: reg 18 io port: [0x5000-0x50ff] pci 0000:08:00.0: supports D1 D2 pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:00.0: PME# disabled pci 0000:00:1c.4: bridge io port: [0x5000-0x5fff] pci 0000:00:1c.4: bridge 32bit mmio: [0xfc200000-0xfc2fffff] pci 0000:09:03.0: reg 10 32bit mmio: [0xfc300000-0xfc300fff] pci 0000:09:03.0: supports D1 D2 pci 0000:09:03.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:09:03.0: PME# disabled pci 0000:09:03.1: reg 10 32bit mmio: [0xfc302000-0xfc3027ff] pci 0000:09:03.1: reg 14 32bit mmio: [0xfc304000-0xfc307fff] pci 0000:09:03.1: supports D1 D2 pci 0000:09:03.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:09:03.1: PME# disabled pci 0000:09:03.2: reg 10 32bit mmio: [0xfc301000-0xfc301fff] pci 0000:09:03.2: supports D1 D2 pci 0000:09:03.2: PME# supported from D0 D1 D2 D3hot pci 0000:09:03.2: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xfc300000-0xfc3fffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 PCI: Using ACPI for IRQ routing cfg80211: Calling CRDA to update world regulatory domain cfg80211: Failed calling CRDA cfg80211: calling CRDA failed - unable to update world regulatory domain, using static definition hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xe0000000-0xefffffff has been reserved system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved system 00:06: ioport range 0x680-0x69f has been reserved system 00:06: ioport range 0x800-0x80f has been reserved system 00:06: ioport range 0x1000-0x107f has been reserved system 00:06: ioport range 0x1180-0x11bf has been reserved system 00:06: ioport range 0x1640-0x164f has been reserved system 00:06: ioport range 0xfe00-0xfe7f has been reserved system 00:06: ioport range 0xfe80-0xfeff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x2000-0x2fff pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.1: IO window: 0x3000-0x3fff pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06 pci 0000:00:1c.2: IO window: 0x4000-0x4fff pci 0000:00:1c.2: MEM window: 0xfa000000-0xfbffffff pci 0000:00:1c.2: PREFETCH window: 0x000000f4000000-0x000000f5ffffff pci 0000:00:1c.4: PCI bridge, secondary bus 0000:08 pci 0000:00:1c.4: IO window: 0x5000-0x5fff pci 0000:00:1c.4: MEM window: 0xfc200000-0xfc2fffff pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:09:03.0: CardBus bridge, secondary bus 0000:0a pci 0000:09:03.0: IO window: 0x006000-0x0060ff pci 0000:09:03.0: IO window: 0x006400-0x0064ff pci 0000:09:03.0: PREFETCH window: 0x88000000-0x8bffffff pci 0000:09:03.0: MEM window: 0x90000000-0x93ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 pci 0000:00:1e.0: IO window: 0x6000-0x6fff pci 0000:00:1e.0: MEM window: 0xfc300000-0xfc3fffff pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] bus: 02 index 0 io port: [0x2000-0x2fff] bus: 02 index 1 mmio: [0xf6000000-0xf7ffffff] bus: 02 index 2 mmio: [0xf0000000-0xf1ffffff] bus: 02 index 3 mmio: [0x0-0x0] bus: 04 index 0 io port: [0x3000-0x3fff] bus: 04 index 1 mmio: [0xf8000000-0xf9ffffff] bus: 04 index 2 mmio: [0xf2000000-0xf3ffffff] bus: 04 index 3 mmio: [0x0-0x0] bus: 06 index 0 io port: [0x4000-0x4fff] bus: 06 index 1 mmio: [0xfa000000-0xfbffffff] bus: 06 index 2 mmio: [0xf4000000-0xf5ffffff] bus: 06 index 3 mmio: [0x0-0x0] bus: 08 index 0 io port: [0x5000-0x5fff] bus: 08 index 1 mmio: [0xfc200000-0xfc2fffff] bus: 08 index 2 mmio: [0x0-0x0] bus: 08 index 3 mmio: [0x0-0x0] bus: 09 index 0 io port: [0x6000-0x6fff] bus: 09 index 1 mmio: [0xfc300000-0xfc3fffff] bus: 09 index 2 mmio: [0x88000000-0x8bffffff] bus: 09 index 3 io port: [0x00-0xffff] bus: 09 index 4 mmio: [0x000000-0xffffffffffffffff] bus: 0a index 0 io port: [0x6000-0x60ff] bus: 0a index 1 io port: [0x6400-0x64ff] bus: 0a index 2 mmio: [0x88000000-0x8bffffff] bus: 0a index 3 mmio: [0x90000000-0x93ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... done Freeing initrd memory: 2200k freed Simple Boot Flag at 0x36 set to 0x1 msgmni has been set to 4003 alg: No test for stdrng (krng) io scheduler noop registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010100000, using 4000k, total 7616k vesafb: mode is 1280x800x16, linelength=2560, pages=2 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 160x50 fb0: VESA VGA frame buffer device ACPI: AC Adapter [ADP1] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID0] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button (CM) [PWRB] acpi device:08: registered as cooling_device0 acpi device:09: registered as cooling_device1 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/input/input2 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) ACPI: SSDT 7F6D8C52, 02A1 (r1 Sony VAIO 20070704 PTL 20050624) ACPI: SSDT 7F6D8709, 04B7 (r1 Sony VAIO 20070704 PTL 20050624)<7>Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device2 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7F6D8EF3, 00E4 (r1 Sony VAIO 20070704 PTL 20050624) ACPI: SSDT 7F6D8BC0, 0092 (r1 Sony VAIO 20070704 PTL 20050624) ACPI: EC: GPE storm detected, transactions will use polling mode ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:01: registered as cooling_device3 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (45 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [TZ01] (45 C) Generic RTC Driver v1.07 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20080730 on minor 0 intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets intelfb: Version 0.9.6 intelfb: Cannot reserve FB region. tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 sony-laptop: Sony Notebook Control Driver v0.6. input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:29/SNY5001:00/input/input3 input: Sony Vaio Jogdial as /devices/virtual/input/input4 sony-laptop: detected Sony Vaio FZ Series Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu Marking TSC unstable due to TSC halts in idle sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman Advanced Linux Sound Architecture Driver Version 1.0.18rc3. ALSA device list: No soundcards found. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 NET: Registered protocol family 15 Freeing unused kernel memory: 320k freed input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc604800 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc604c00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input6 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input7 hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods Clocksource tsc unstable (delta = -128025211 ns) libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed ata2: DUMMY ata3: DUMMY usb 1-2: new high speed USB device using ehci_hcd and address 2 usb 1-2: configuration #1 chosen from 1 choice input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input8 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input9 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ATA-8: FUJITSU MHX2250BT, 0041000B, max UDMA/100 ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA FUJITSU MHX2250B 0041 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi3 : ata_piix scsi4 : ata_piix ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 ata4.00: ATAPI: SONY DVD RW AW-G540A, 1.W0, max UDMA/33 ata4.00: configured for UDMA/33 isa bounce pool size: 16 pages scsi 3:0:0:0: CD-ROM SONY DVD RW AW-G540A 1.W0 PQ: 0 ANSI: 5 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: sda1: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 720331 ext3_orphan_cleanup: deleting unreferenced inode 2013901 EXT3-fs: sda1: 2 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Linux video capture interface: v2.00 iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kd iwlagn: Copyright(c) 2003-2008 Intel Corporation iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:06:00.0: setting latency timer to 64 iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 sky2 driver version 1.22 sky2 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sky2 0000:08:00.0: setting latency timer to 64 sky2 0000:08:00.0: Yukon-2 FE chip revision 1 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 3:0:0:0: Attached scsi generic sg1 type 5 uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b) iwlagn: Tunable channels: 11 802.11bg, 13 802.11a channels sky2 0000:08:00.0: Marvell Yukon 88E8036 Fast Ethernet Controller Part Number: Yukon 88E8036 Engineering Level: Rev. 1.6 Manufacturer: Marvell uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26). uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32 (exp. 26). uvcvideo: Failed to initialize the device (-5). usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) sky2 eth0: addr 00:1a:80:4a:7f:37 iwlagn 0000:06:00.0: PCI INT A disabled phy0: Selected rate control algorithm 'iwl-agn-rs' HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 ohci1394 0000:09:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8] iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x40100102, writing 0x40100106) iwlagn 0000:06:00.0: firmware: requesting iwlwifi-4965-2.ucode Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460302903fd0] iwlagn: TX Power requested while scanning! iwlagn: Error sending TX power (-11) iwlagn 0000:06:00.0: PCI INT A disabled Non-volatile memory driver v1.2 EXT3 FS on sda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 4281280k swap on /dev/sda6. Priority:-1 extents:1 across:4281280k iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:0b:86:dd:92:01 wlan0: authenticated wlan0: associate with AP 00:0b:86:dd:92:01 wlan0: RX AssocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1) wlan0: associated wlan0: deauthenticated wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:0b:86:dd:92:01 wlan0: authenticated wlan0: associate with AP 00:0b:86:dd:92:01 wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1) wlan0: associated phy0: failed to restore operational channel after scan evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html ACPI: EC: missing confirmations, switch off interrupt mode. evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html process `skype' is using obsolete setsockopt SO_BSDCOMPAT PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk ACPI handle has no context! ACPI handle has no context! tifm_7xx1 0000:09:03.2: PCI INT C disabled ACPI handle has no context! ACPI handle has no context! iwlagn 0000:06:00.0: PCI INT A disabled ahci 0000:00:1f.2: PCI INT B disabled ata_piix 0000:00:1f.1: PCI INT A disabled ehci_hcd 0000:00:1d.7: PCI INT A disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled HDA Intel 0000:00:1b.0: PCI INT A disabled ehci_hcd 0000:00:1a.7: PCI INT C disabled uhci_hcd 0000:00:1a.1: PCI INT B disabled uhci_hcd 0000:00:1a.0: PCI INT A disabled ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... CPU 1 is now offline SMP alternatives: switching to UP code CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. CPU1 is down Extended CMOS year: 2000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Back to C! Extended CMOS year: 2000 Enabling non-boot CPUs ... SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3991.24 BogoMIPS (lpj=6649998) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d CPU0 attaching NULL sched-domain. Switched to high resolution mode on CPU 1 CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 CPU1 is up ACPI: Waking up from system sleep state S3 sony-laptop: detected Sony Vaio FZ Series pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 usb usb4: root hub lost power or was reset ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 pci 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) pci 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20002020, writing 0x2020) pci 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205) pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201) pci 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800) pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x3030) pci 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40307) pci 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401) pci 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00) pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040) pci 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pci 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) pci 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) pci 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20) pci 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050) pci 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pci 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb5: root hub lost power or was reset uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb6: root hub lost power or was reset uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb7: root hub lost power or was reset ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x8bf18801) pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc30fc30) pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22806060) pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107) pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005) ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.1: setting latency timer to 64 ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: setting latency timer to 64 i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x8c000000) iwlagn 0000:06:00.0: enabling device (0000 -> 0002) iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) iwlagn 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa000004) iwlagn 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100106) sky2 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) sky2 0000:08:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x5001) sky2 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc200004) sky2 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) sky2 0000:08:00.0: restoring config space at offset 0x1 (was 0x40100000, writing 0x100107) pci 0000:09:03.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x3440105) pci 0000:09:03.0: restoring config space at offset 0xe (was 0x0, writing 0x64fc) pci 0000:09:03.0: restoring config space at offset 0xd (was 0x0, writing 0x6400) pci 0000:09:03.0: restoring config space at offset 0xc (was 0x0, writing 0x60fc) pci 0000:09:03.0: restoring config space at offset 0xb (was 0x0, writing 0x6000) pci 0000:09:03.0: restoring config space at offset 0xa (was 0x0, writing 0x93fff000) pci 0000:09:03.0: restoring config space at offset 0x9 (was 0x0, writing 0x90000000) pci 0000:09:03.0: restoring config space at offset 0x8 (was 0x0, writing 0x8bfff000) pci 0000:09:03.0: restoring config space at offset 0x7 (was 0x0, writing 0x88000000) pci 0000:09:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb00d0a09) pci 0000:09:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc300000) pci 0000:09:03.0: restoring config space at offset 0x3 (was 0x820000, writing 0x823110) pci 0000:09:03.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100107) pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci1394 0000:09:03.1: restoring config space at offset 0xf (was 0x4030200, writing 0x403020a) ohci1394 0000:09:03.1: restoring config space at offset 0x5 (was 0x0, writing 0xfc304000) ohci1394 0000:09:03.1: restoring config space at offset 0x4 (was 0x0, writing 0xfc302000) ohci1394 0000:09:03.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) ohci1394 0000:09:03.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116) ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8] tifm_7xx1 0000:09:03.2: restoring config space at offset 0xf (was 0x40703ff, writing 0x4070307) tifm_7xx1 0000:09:03.2: restoring config space at offset 0x4 (was 0x0, writing 0xfc301000) tifm_7xx1 0000:09:03.2: restoring config space at offset 0x3 (was 0x800000, writing 0x803910) tifm_7xx1 0000:09:03.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:02.0: setting latency timer to 64 ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata4.00: configured for UDMA/33 Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX sd 0:0:0:0: [sda] Starting disk ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Restarting tasks ... done. wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:0b:86:dd:92:01 wlan0: authenticated wlan0: associate with AP 00:0b:86:dd:92:01 wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1) wlan0: associated evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html ACPI: EC: missing confirmations, switch off interrupt mode. PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk ACPI handle has no context! ACPI handle has no context! tifm_7xx1 0000:09:03.2: PCI INT C disabled ACPI handle has no context! ACPI handle has no context! iwlagn 0000:06:00.0: PCI INT A disabled ahci 0000:00:1f.2: PCI INT B disabled ata_piix 0000:00:1f.1: PCI INT A disabled ehci_hcd 0000:00:1d.7: PCI INT A disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled HDA Intel 0000:00:1b.0: PCI INT A disabled ehci_hcd 0000:00:1a.7: PCI INT C disabled uhci_hcd 0000:00:1a.1: PCI INT B disabled uhci_hcd 0000:00:1a.0: PCI INT A disabled ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... CPU 1 is now offline SMP alternatives: switching to UP code CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. CPU1 is down Extended CMOS year: 2000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Back to C! Extended CMOS year: 2000 Enabling non-boot CPUs ... SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3991.31 BogoMIPS (lpj=6650107) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d CPU0 attaching NULL sched-domain. Switched to high resolution mode on CPU 1 CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 CPU1 is up ACPI: Waking up from system sleep state S3 sony-laptop: detected Sony Vaio FZ Series pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 usb usb4: root hub lost power or was reset ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 pci 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) pci 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205) pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201) pci 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800) pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x3030) pci 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40307) pci 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401) pci 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00) pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x20004040) pci 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pci 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) pci 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) pci 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20) pci 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x20005050) pci 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pci 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb5: root hub lost power or was reset uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb6: root hub lost power or was reset uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb7: root hub lost power or was reset ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x8bf18801) pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc30fc30) pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22806060) pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107) pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005) ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.1: setting latency timer to 64 ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: setting latency timer to 64 i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x8c000000) iwlagn 0000:06:00.0: enabling device (0000 -> 0002) iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) iwlagn 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa000004) iwlagn 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100106) sky2 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) sky2 0000:08:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x5001) sky2 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc200004) sky2 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) sky2 0000:08:00.0: restoring config space at offset 0x1 (was 0x40100000, writing 0x100107) pci 0000:09:03.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x3440105) pci 0000:09:03.0: restoring config space at offset 0xe (was 0x0, writing 0x64fc) pci 0000:09:03.0: restoring config space at offset 0xd (was 0x0, writing 0x6400) pci 0000:09:03.0: restoring config space at offset 0xc (was 0x0, writing 0x60fc) pci 0000:09:03.0: restoring config space at offset 0xb (was 0x0, writing 0x6000) pci 0000:09:03.0: restoring config space at offset 0xa (was 0x0, writing 0x93fff000) pci 0000:09:03.0: restoring config space at offset 0x9 (was 0x0, writing 0x90000000) pci 0000:09:03.0: restoring config space at offset 0x8 (was 0x0, writing 0x8bfff000) pci 0000:09:03.0: restoring config space at offset 0x7 (was 0x0, writing 0x88000000) pci 0000:09:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb00d0a09) pci 0000:09:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc300000) pci 0000:09:03.0: restoring config space at offset 0x3 (was 0x820000, writing 0x823110) pci 0000:09:03.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100107) pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci1394 0000:09:03.1: restoring config space at offset 0xf (was 0x4030200, writing 0x403020a) ohci1394 0000:09:03.1: restoring config space at offset 0x5 (was 0x0, writing 0xfc304000) ohci1394 0000:09:03.1: restoring config space at offset 0x4 (was 0x0, writing 0xfc302000) ohci1394 0000:09:03.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) ohci1394 0000:09:03.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116) ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8] tifm_7xx1 0000:09:03.2: restoring config space at offset 0xf (was 0x40703ff, writing 0x4070307) tifm_7xx1 0000:09:03.2: restoring config space at offset 0x4 (was 0x0, writing 0xfc301000) tifm_7xx1 0000:09:03.2: restoring config space at offset 0x3 (was 0x800000, writing 0x803910) tifm_7xx1 0000:09:03.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:02.0: setting latency timer to 64 ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata4.00: configured for UDMA/33 Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX sd 0:0:0:0: [sda] Starting disk ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Restarting tasks ... done. wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:0b:86:dd:92:01 wlan0: authenticated wlan0: associate with AP 00:0b:86:dd:92:01 wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1) wlan0: associated phy0: failed to restore operational channel after scan evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk ACPI handle has no context! ACPI handle has no context! tifm_7xx1 0000:09:03.2: PCI INT C disabled ACPI handle has no context! ACPI handle has no context! iwlagn 0000:06:00.0: PCI INT A disabled ahci 0000:00:1f.2: PCI INT B disabled ata_piix 0000:00:1f.1: PCI INT A disabled ehci_hcd 0000:00:1d.7: PCI INT A disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled HDA Intel 0000:00:1b.0: PCI INT A disabled ehci_hcd 0000:00:1a.7: PCI INT C disabled uhci_hcd 0000:00:1a.1: PCI INT B disabled uhci_hcd 0000:00:1a.0: PCI INT A disabled ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... CPU 1 is now offline SMP alternatives: switching to UP code CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. CPU1 is down Extended CMOS year: 2000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Back to C! Extended CMOS year: 2000 Enabling non-boot CPUs ... SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3991.29 BogoMIPS (lpj=6650066) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d CPU0 attaching NULL sched-domain. Switched to high resolution mode on CPU 1 CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 CPU1 is up ACPI: Waking up from system sleep state S3 sony-laptop: detected Sony Vaio FZ Series pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 usb usb4: root hub lost power or was reset ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 pci 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) pci 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205) pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201) pci 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800) pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x3030) pci 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40307) pci 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401) pci 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00) pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040) pci 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pci 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) pci 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) pci 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20) pci 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050) pci 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pci 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb5: root hub lost power or was reset uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb6: root hub lost power or was reset uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb7: root hub lost power or was reset ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x8bf18801) pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc30fc30) pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22806060) pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107) pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005) ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.1: setting latency timer to 64 ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: setting latency timer to 64 i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x8c000000) iwlagn 0000:06:00.0: enabling device (0000 -> 0002) iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) iwlagn 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa000004) iwlagn 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100106) sky2 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) sky2 0000:08:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x5001) sky2 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc200004) sky2 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) sky2 0000:08:00.0: restoring config space at offset 0x1 (was 0x40100000, writing 0x100107) pci 0000:09:03.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x3440105) pci 0000:09:03.0: restoring config space at offset 0xe (was 0x0, writing 0x64fc) pci 0000:09:03.0: restoring config space at offset 0xd (was 0x0, writing 0x6400) pci 0000:09:03.0: restoring config space at offset 0xc (was 0x0, writing 0x60fc) pci 0000:09:03.0: restoring config space at offset 0xb (was 0x0, writing 0x6000) pci 0000:09:03.0: restoring config space at offset 0xa (was 0x0, writing 0x93fff000) pci 0000:09:03.0: restoring config space at offset 0x9 (was 0x0, writing 0x90000000) pci 0000:09:03.0: restoring config space at offset 0x8 (was 0x0, writing 0x8bfff000) pci 0000:09:03.0: restoring config space at offset 0x7 (was 0x0, writing 0x88000000) pci 0000:09:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb00d0a09) pci 0000:09:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc300000) pci 0000:09:03.0: restoring config space at offset 0x3 (was 0x820000, writing 0x823110) pci 0000:09:03.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100107) pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci1394 0000:09:03.1: restoring config space at offset 0xf (was 0x4030200, writing 0x403020a) ohci1394 0000:09:03.1: restoring config space at offset 0x5 (was 0x0, writing 0xfc304000) ohci1394 0000:09:03.1: restoring config space at offset 0x4 (was 0x0, writing 0xfc302000) ohci1394 0000:09:03.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) ohci1394 0000:09:03.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116) ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8] tifm_7xx1 0000:09:03.2: restoring config space at offset 0xf (was 0x40703ff, writing 0x4070307) tifm_7xx1 0000:09:03.2: restoring config space at offset 0x4 (was 0x0, writing 0xfc301000) tifm_7xx1 0000:09:03.2: restoring config space at offset 0x3 (was 0x800000, writing 0x803910) tifm_7xx1 0000:09:03.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:02.0: setting latency timer to 64 ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata4.00: configured for UDMA/33 Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX sd 0:0:0:0: [sda] Starting disk ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Restarting tasks ... <7>wlan0: deauthenticating by local choice (reason=1) done. wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:0b:86:dd:92:01 wlan0: authenticated wlan0: associate with AP 00:0b:86:dd:92:01 wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1) wlan0: associated evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html wlan0: deauthenticated wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:0b:86:dd:92:01 wlan0: authenticated wlan0: associate with AP 00:0b:86:dd:92:01 wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1) wlan0: associated phy0: failed to restore operational channel after scan ACPI: EC: missing confirmations, switch off interrupt mode. PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk ACPI handle has no context! ACPI handle has no context! tifm_7xx1 0000:09:03.2: PCI INT C disabled ACPI handle has no context! ACPI handle has no context! iwlagn 0000:06:00.0: PCI INT A disabled ahci 0000:00:1f.2: PCI INT B disabled ata_piix 0000:00:1f.1: PCI INT A disabled ehci_hcd 0000:00:1d.7: PCI INT A disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled HDA Intel 0000:00:1b.0: PCI INT A disabled ehci_hcd 0000:00:1a.7: PCI INT C disabled uhci_hcd 0000:00:1a.1: PCI INT B disabled uhci_hcd 0000:00:1a.0: PCI INT A disabled ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... CPU 1 is now offline SMP alternatives: switching to UP code CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. CPU1 is down Extended CMOS year: 2000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Back to C! Extended CMOS year: 2000 Enabling non-boot CPUs ... SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3991.30 BogoMIPS (lpj=6650083) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d CPU0 attaching NULL sched-domain. Switched to high resolution mode on CPU 1 CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 CPU1 is up ACPI: Waking up from system sleep state S3 sony-laptop: detected Sony Vaio FZ Series pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 usb usb4: root hub lost power or was reset ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 pci 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) pci 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205) pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201) pci 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800) pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x3030) pci 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40307) pci 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401) pci 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00) pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x20004040) pci 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pci 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) pci 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) pci 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20) pci 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x20005050) pci 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pci 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb5: root hub lost power or was reset uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb6: root hub lost power or was reset uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb7: root hub lost power or was reset ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x8bf18801) pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc30fc30) pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22806060) pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107) pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005) ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.1: setting latency timer to 64 ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: setting latency timer to 64 i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x8c000000) iwlagn 0000:06:00.0: enabling device (0000 -> 0002) iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) iwlagn 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa000004) iwlagn 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100106) sky2 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) sky2 0000:08:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x5001) sky2 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc200004) sky2 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) sky2 0000:08:00.0: restoring config space at offset 0x1 (was 0x40100000, writing 0x100107) pci 0000:09:03.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x3440105) pci 0000:09:03.0: restoring config space at offset 0xe (was 0x0, writing 0x64fc) pci 0000:09:03.0: restoring config space at offset 0xd (was 0x0, writing 0x6400) pci 0000:09:03.0: restoring config space at offset 0xc (was 0x0, writing 0x60fc) pci 0000:09:03.0: restoring config space at offset 0xb (was 0x0, writing 0x6000) pci 0000:09:03.0: restoring config space at offset 0xa (was 0x0, writing 0x93fff000) pci 0000:09:03.0: restoring config space at offset 0x9 (was 0x0, writing 0x90000000) pci 0000:09:03.0: restoring config space at offset 0x8 (was 0x0, writing 0x8bfff000) pci 0000:09:03.0: restoring config space at offset 0x7 (was 0x0, writing 0x88000000) pci 0000:09:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb00d0a09) pci 0000:09:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc300000) pci 0000:09:03.0: restoring config space at offset 0x3 (was 0x820000, writing 0x823110) pci 0000:09:03.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100107) pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci1394 0000:09:03.1: restoring config space at offset 0xf (was 0x4030200, writing 0x403020a) ohci1394 0000:09:03.1: restoring config space at offset 0x5 (was 0x0, writing 0xfc304000) ohci1394 0000:09:03.1: restoring config space at offset 0x4 (was 0x0, writing 0xfc302000) ohci1394 0000:09:03.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) ohci1394 0000:09:03.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116) ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8] tifm_7xx1 0000:09:03.2: restoring config space at offset 0xf (was 0x40703ff, writing 0x4070307) tifm_7xx1 0000:09:03.2: restoring config space at offset 0x4 (was 0x0, writing 0xfc301000) tifm_7xx1 0000:09:03.2: restoring config space at offset 0x3 (was 0x800000, writing 0x803910) tifm_7xx1 0000:09:03.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:02.0: setting latency timer to 64 ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata4.00: configured for UDMA/33 Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX sd 0:0:0:0: [sda] Starting disk ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Restarting tasks ... done. wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:0b:86:dd:92:01 wlan0: authenticated wlan0: associate with AP 00:0b:86:dd:92:01 wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1) wlan0: associated evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html hub 2-0:1.0: unable to enumerate USB device on port 2 usb 2-2: new high speed USB device using ehci_hcd and address 3 usb 2-2: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi5 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. scsi 5:0:0:0: Direct-Access SanDisk Sansa Clip 8GB v02. PQ: 0 ANSI: 0 sd 5:0:0:0: [sdb] 15993856 512-byte hardware sectors: (8.18 GB/7.62 GiB) sd 5:0:0:0: [sdb] Write Protect is off sd 5:0:0:0: [sdb] Mode Sense: 04 00 00 00 sd 5:0:0:0: [sdb] Assuming drive cache: write through sd 5:0:0:0: [sdb] 15993856 512-byte hardware sectors: (8.18 GB/7.62 GiB) sd 5:0:0:0: [sdb] Write Protect is off sd 5:0:0:0: [sdb] Mode Sense: 04 00 00 00 sd 5:0:0:0: [sdb] Assuming drive cache: write through sdb: sd 5:0:0:0: [sdb] Attached SCSI removable disk sd 5:0:0:0: Attached scsi generic sg2 type 0 usb-storage: device scan complete usb 2-2: USB disconnect, address 3 PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.05 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk ACPI handle has no context! ACPI handle has no context! tifm_7xx1 0000:09:03.2: PCI INT C disabled ACPI handle has no context! ACPI handle has no context! iwlagn 0000:06:00.0: PCI INT A disabled ahci 0000:00:1f.2: PCI INT B disabled ata_piix 0000:00:1f.1: PCI INT A disabled ehci_hcd 0000:00:1d.7: PCI INT A disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled HDA Intel 0000:00:1b.0: PCI INT A disabled ehci_hcd 0000:00:1a.7: PCI INT C disabled uhci_hcd 0000:00:1a.1: PCI INT B disabled uhci_hcd 0000:00:1a.0: PCI INT A disabled ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... CPU 1 is now offline SMP alternatives: switching to UP code CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. CPU1 is down Extended CMOS year: 2000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Back to C! Extended CMOS year: 2000 Enabling non-boot CPUs ... SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3991.26 BogoMIPS (lpj=6650021) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d CPU0 attaching NULL sched-domain. Switched to high resolution mode on CPU 1 CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 CPU1 is up ACPI: Waking up from system sleep state S3 sony-laptop: detected Sony Vaio FZ Series pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 usb usb4: root hub lost power or was reset ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 pci 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) pci 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205) pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201) pci 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800) pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x3030) pci 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40307) pci 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401) pci 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00) pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040) pci 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pci 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) pci 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) pci 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20) pci 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050) pci 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pci 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb5: root hub lost power or was reset uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb6: root hub lost power or was reset uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb7: root hub lost power or was reset ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x8bf18801) pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc30fc30) pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22806060) pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107) pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005) ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.1: setting latency timer to 64 ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: setting latency timer to 64 i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x8c000000) iwlagn 0000:06:00.0: enabling device (0000 -> 0002) iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) iwlagn 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa000004) iwlagn 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100106) sky2 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) sky2 0000:08:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x5001) sky2 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc200004) sky2 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) sky2 0000:08:00.0: restoring config space at offset 0x1 (was 0x40100000, writing 0x100107) pci 0000:09:03.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x3440105) pci 0000:09:03.0: restoring config space at offset 0xe (was 0x0, writing 0x64fc) pci 0000:09:03.0: restoring config space at offset 0xd (was 0x0, writing 0x6400) pci 0000:09:03.0: restoring config space at offset 0xc (was 0x0, writing 0x60fc) pci 0000:09:03.0: restoring config space at offset 0xb (was 0x0, writing 0x6000) pci 0000:09:03.0: restoring config space at offset 0xa (was 0x0, writing 0x93fff000) pci 0000:09:03.0: restoring config space at offset 0x9 (was 0x0, writing 0x90000000) pci 0000:09:03.0: restoring config space at offset 0x8 (was 0x0, writing 0x8bfff000) pci 0000:09:03.0: restoring config space at offset 0x7 (was 0x0, writing 0x88000000) pci 0000:09:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb00d0a09) pci 0000:09:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc300000) pci 0000:09:03.0: restoring config space at offset 0x3 (was 0x820000, writing 0x823110) pci 0000:09:03.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100107) pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci1394 0000:09:03.1: restoring config space at offset 0xf (was 0x4030200, writing 0x403020a) ohci1394 0000:09:03.1: restoring config space at offset 0x5 (was 0x0, writing 0xfc304000) ohci1394 0000:09:03.1: restoring config space at offset 0x4 (was 0x0, writing 0xfc302000) ohci1394 0000:09:03.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) ohci1394 0000:09:03.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116) ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8] tifm_7xx1 0000:09:03.2: restoring config space at offset 0xf (was 0x40703ff, writing 0x4070307) tifm_7xx1 0000:09:03.2: restoring config space at offset 0x4 (was 0x0, writing 0xfc301000) tifm_7xx1 0000:09:03.2: restoring config space at offset 0x3 (was 0x800000, writing 0x803910) tifm_7xx1 0000:09:03.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:02.0: setting latency timer to 64 ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata4.00: configured for UDMA/33 Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX sd 0:0:0:0: [sda] Starting disk ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Restarting tasks ... <7>wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 done. wlan0: direct probe to AP 00:0b:86:dd:92:01 try 2 wlan0: direct probe to AP 00:0b:86:dd:92:01 try 3 wlan0: direct probe to AP 00:0b:86:dd:92:01 timed out wlan0: direct probe to AP 00:0b:86:28:1a:d1 try 1 wlan0: direct probe to AP 00:0b:86:28:1a:d1 try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:0b:86:28:1a:d1 wlan0: authenticated wlan0: associate with AP 00:0b:86:28:1a:d1 wlan0: RX ReassocResp from 00:0b:86:28:1a:d1 (capab=0x431 status=0 aid=1) wlan0: associated evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html wlan0: deauthenticated wlan0: direct probe to AP 00:0b:86:28:1a:d1 try 1 wlan0: direct probe to AP 00:0b:86:28:1a:d1 try 2 wlan0 direct probe responded wlan0: authenticate with AP 00:0b:86:28:1a:d1 wlan0: authenticated wlan0: associate with AP 00:0b:86:28:1a:d1 wlan0: RX ReassocResp from 00:0b:86:28:1a:d1 (capab=0x431 status=0 aid=1) wlan0: associated phy0: failed to restore operational channel after scan phy0: failed to restore operational channel after scan wlan0: direct probe to AP 00:0b:86:28:21:71 try 1 wlan0: direct probe to AP 00:0b:86:28:21:71 try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:0b:86:28:21:71 wlan0: authenticated wlan0: associate with AP 00:0b:86:28:21:71 wlan0: associate with AP 00:0b:86:28:21:71 wlan0: RX ReassocResp from 00:0b:86:28:21:71 (capab=0x431 status=0 aid=1) wlan0: associated ACPI: EC: missing confirmations, switch off interrupt mode. iwlagn 0000:06:00.0: PCI INT A disabled iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX iwlagn 0000:06:00.0: PCI INT A disabled iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX wlan0: direct probe to AP 00:0b:86:3e:10:31 try 1 wlan0: direct probe to AP 00:0b:86:3e:10:31 try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:0b:86:3e:10:31 wlan0: authenticated wlan0: associate with AP 00:0b:86:3e:10:31 wlan0: RX AssocResp from 00:0b:86:3e:10:31 (capab=0x431 status=0 aid=1) wlan0: associated wlan0: deauthenticating by local choice (reason=3) iwlagn 0000:06:00.0: PCI INT A disabled iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) general protection fault: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq CPU 1 Modules linked in: nls_iso8859_1 nls_cp437 vfat fat usb_storage xt_comment xt_policy xt_tcpmss xt_pkttype xt_owner xt_NFQUEUE xt_NFLOG xt_multiport xt_MARK xt_mark xt_mac xt_limit xt_length xt_iprange xt_hashlimit xt_dscp xt_dccp xt_CLASSIFY snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss nvram ohci1394 ieee1394 snd_hda_intel uvcvideo snd_pcm sg sky2 i2c_i801 sr_mod iwlagn compat_ioctl32 snd_timer evdev videodev snd_page_alloc v4l1_compat snd_hwdep ata_piix ahci libata sd_mod scsi_mod uhci_hcd ohci_hcd ehci_hcd usbcore [last unloaded: scsi_wait_scan] Pid: 3163, comm: ifplugd Not tainted 2.6.28-rc4-keypress-00322-g58e20d8 #14 RIP: 0010:[<ffffffff803d844b>] [<ffffffff803d844b>] iwl_eeprom_query16+0xb/0x20 RSP: 0018:ffff88007b631a88 EFLAGS: 00010092 RAX: 7fff88007dfd5400 RBX: ffff88007d81a000 RCX: 00000000800600f0 RDX: 0000000000000cfc RSI: 0000000000000090 RDI: ffff88007dcc1940 RBP: ffff88007b631a88 R08: 0000000000000002 R09: ffff88007b631a5c R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000080006 R13: ffff88007dcc1940 R14: ffff88007dcc29f8 R15: ffff88007d81a740 FS: 00007f7f93ef16f0(0000) GS:ffff88007f0686c0(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00002ad88fdfd000 CR3: 000000007d935000 CR4: 00000000000006a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process ifplugd (pid: 3163, threadinfo ffff88007b630000, task ffff88007b5ba980) Stack: ffff88007b631af8 ffffffffa0108526 ffff88007b631af8 ffffffffa00f3aaf 0000000000000000 ffff88007dcc2328 0000000000000292 0000000000000000 0143000000000000 ffff88007d81a000 ffff88007dcc1940 ffff88007dcc2328 Call Trace: [<ffffffffa0108526>] iwl4965_nic_config+0xa6/0x380 [iwlagn] [<ffffffffa00f3aaf>] ? iwl4965_set_pwr_src+0x1cf/0x3d0 [iwlagn] [<ffffffff803d5a9b>] iwl_hw_nic_init+0x11b/0x1d0 [<ffffffffa00fbe17>] __iwl4965_up+0x1a7/0x720 [iwlagn] [<ffffffffa00fd0c8>] iwl4965_mac_start+0xd38/0x1570 [iwlagn] [<ffffffff8022d365>] ? __wake_up_sync+0x55/0x70 [<ffffffff8043000f>] ? sock_def_readable+0x6f/0x80 [<ffffffff8049b893>] ? unix_dgram_sendmsg+0x463/0x4f0 [<ffffffff804b5cf8>] ieee80211_open+0x328/0x830 [<ffffffff8042bf5b>] ? sock_sendmsg+0xdb/0xf0 [<ffffffff8043cba4>] dev_open+0x64/0xc0 [<ffffffff8043ba71>] dev_change_flags+0x91/0x1b0 [<ffffffff8047fde3>] devinet_ioctl+0x5b3/0x750 [<ffffffff8048096d>] inet_ioctl+0x6d/0x90 [<ffffffff8042c4d5>] sock_ioctl+0xc5/0x240 [<ffffffff802a60f1>] vfs_ioctl+0x31/0x90 [<ffffffff802a647b>] do_vfs_ioctl+0x32b/0x460 [<ffffffff802a65fa>] sys_ioctl+0x4a/0x80 [<ffffffff8020c1fb>] system_call_fastpath+0x16/0x1b Code: 48 8b 47 18 55 48 89 e5 48 8b 40 18 48 8b 00 ff 90 00 01 00 00 c9 c3 66 0f 1f 84 00 00 00 00 00 48 8b 87 98 22 01 00 55 48 89 e5 <0f> b6 54 06 01 0f b6 04 30 c9 c1 e2 08 09 d0 0f b7 c0 c3 66 90 RIP [<ffffffff803d844b>] iwl_eeprom_query16+0xb/0x20 RSP <ffff88007b631a88> ---[ end trace 28eaede31d178563 ]--- ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: iwlagn driver segfault in 2.6.28-rc3 2008-11-16 12:51 ` Carlos R. Mafra @ 2008-11-16 23:54 ` Tomas Winkler 2008-11-17 0:39 ` Carlos R. Mafra 0 siblings, 1 reply; 11+ messages in thread From: Tomas Winkler @ 2008-11-16 23:54 UTC (permalink / raw) To: Carlos R. Mafra Cc: reinette chatre, Lukas Hejtmanek, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org, ipw3945-devel@lists.sourceforge.net On Sun, Nov 16, 2008 at 2:51 PM, Carlos R. Mafra <crmafra2@gmail.com> wrote: > On Sun 16.Nov'08 at 14:29:12 +0200, Tomas Winkler wrote: >> On Sun, Nov 16, 2008 at 2:06 PM, Carlos R. Mafra <crmafra2@gmail.com> wrote: >> > I just got (another) one of this too. >> > >> > The wireless connection suddenly lost the AP and I was waiting >> > for ifplugd to reconnect to it again automatically, as it always >> > does. >> > >> > After waiting for one or two minutes I decided to 'modprobe -r >> > iwlagn' but this command never returned (it got stuck). >> > >> > Then I looked at the end of dmesg and found this: >> >> Did you happen to have logs open so I can see what happen prior to that >> We found out that this is due to double removal of an encryption key >> but I still haven't see the exact flow. > > Here is the whole dmesg which I saved after that GPF. > > It is a bit bit because I had already suspended to ram a few times > (which is working _fine_, btw) Can you please try this one (might be white space broken, just pasted in) diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 61797f3..d848c63 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -734,6 +734,12 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv, return 0; } + if (WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, + "Removing wrong key %d 0x%x\n", keyconf->keyidx, key_flags)) { + spin_unlock_irqrestore(&priv->sta_lock, flags); + return 0; + } + if (!test_and_clear_bit(priv->stations[sta_id].sta.key.key_offset, &priv->ucode_key_table)) IWL_ERROR("index %d not used in uCode key table.\n", Thanks Tomas > > BIOS EBDA/lowmem at: 0009f800/0009f800 > Linux version 2.6.28-rc4-keypress-00322-g58e20d8 (mafra@localhost) (gcc version 4.2.3 (4.2.3-6mnb1)) #14 SMP Fri Nov 14 00:02:57 CET 2008 > Command line: BOOT_IMAGE=2628-rc4-keypress-00322-g58e20d root=UUID=019b9dde-30e6-11dd-b550-3d3d11ee558f resume=/dev/sda6 splash=silent vga=0x0364 > KERNEL supported cpus: > Intel GenuineIntel > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable) > BIOS-e820: 000000007f6d0000 - 000000007f6e0000 (ACPI data) > BIOS-e820: 000000007f6e0000 - 000000007f6e3000 (ACPI NVS) > BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved) > BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) > BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) > BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) > DMI present. > last_pfn = 0x7f6d0 max_arch_pfn = 0x3ffffffff > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > init_memory_mapping: 0000000000000000-000000007f6d0000 > 0000000000 - 007f600000 page 2M > 007f600000 - 007f6d0000 page 4k > kernel direct mapping tables up to 7f6d0000 @ 8000-c000 > last_map_addr: 7f6d0000 end: 7f6d0000 > RAMDISK: 37dc9000 - 37fef347 > ACPI: RSDP 000F8060, 0024 (r2 PTLTD ) > ACPI: XSDT 7F6D7E0E, 008C (r1 Sony VAIO 20070704 PTL 0) > ACPI: FACP 7F6DFC04, 00F4 (r3 Sony VAIO 20070704 PTL 1) > ACPI: DSDT 7F6D9217, 6979 (r2 Sony VAIO 20070704 PTL 20050624) > ACPI: FACS 7F6E2FC0, 0040 > ACPI: APIC 7F6DFCF8, 0068 (r1 Sony VAIO 20070704 PTL 5A) > ACPI: HPET 7F6DFD60, 0038 (r1 Sony VAIO 20070704 PTL 5A) > ACPI: MCFG 7F6DFD98, 003C (r1 Sony VAIO 20070704 PTL 5A) > ACPI: SLIC 7F6DFDD4, 0176 (r1 Sony VAIO 20070704 PTL 1000000) > ACPI: TMOR 7F6DFF4A, 0026 (r1 Sony VAIO 20070704 PTL 3) > ACPI: APIC 7F6DFF70, 0068 (r1 Sony VAIO 20070704 PTL 0) > ACPI: BOOT 7F6DFFD8, 0028 (r1 Sony VAIO 20070704 PTL 1) > ACPI: SSDT 7F6D90FA, 011D (r1 Sony VAIO 20070704 PTL 20050624) > ACPI: SSDT 7F6D8FD7, 0123 (r1 Sony VAIO 20070704 PTL 20050624) > ACPI: SSDT 7F6D8482, 0287 (r1 Sony VAIO 20070704 PTL 20050624) > ACPI: SSDT 7F6D83CE, 00B4 (r1 Sony VAIO 20070704 PTL 20050624) > ACPI: SSDT 7F6D7E9A, 0534 (r1 Sony VAIO 20070704 PTL 20050624) > ACPI: BIOS bug: multiple APIC/MADT found, using 0 > ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org > ACPI: DMI detected: Sony > ACPI: Local APIC address 0xfee00000 > (6 early reservations) ==> bootmem [0000000000 - 007f6d0000] > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] > #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] > #2 [0000200000 - 0000746690] TEXT DATA BSS ==> [0000200000 - 0000746690] > #3 [0037dc9000 - 0037fef347] RAMDISK ==> [0037dc9000 - 0037fef347] > #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] > #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] > [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 > Zone PFN ranges: > DMA 0x00000000 -> 0x00001000 > DMA32 0x00001000 -> 0x00100000 > Normal 0x00100000 -> 0x00100000 > Movable zone start PFN for each node > early_node_map[2] active PFN ranges > 0: 0x00000000 -> 0x0000009f > 0: 0x00000100 -> 0x0007f6d0 > On node 0 totalpages: 521839 > DMA zone: 56 pages used for memmap > DMA zone: 1451 pages reserved > DMA zone: 2492 pages, LIFO batch:0 > DMA32 zone: 7080 pages used for memmap > DMA32 zone: 510760 pages, LIFO batch:31 > Normal zone: 0 pages used for memmap > Movable zone: 0 pages used for memmap > ACPI: PM-Timer IO Port: 0x1008 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > ACPI: HPET id: 0x8086a201 base: 0xfed00000 > SMP: Allowing 2 CPUs, 0 hotplug CPUs > PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 > PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 > Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) > PERCPU: Allocating 45056 bytes of per cpu data > NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513252 > Kernel command line: BOOT_IMAGE=2628-rc4-keypress-00322-g58e20d root=UUID=019b9dde-30e6-11dd-b550-3d3d11ee558f resume=/dev/sda6 splash=silent vga=0x0364 > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 32768 bytes) > Extended CMOS year: 2000 > Fast TSC calibration using PIT > Detected 1995.352 MHz processor. > Console: colour dummy device 80x25 > console [tty0] enabled > Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) > Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) > Memory: 2047292k/2087744k available (2911k kernel code, 388k absent, 39592k reserved, 1516k data, 320k init) > hpet clockevent registered > Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.98 BogoMIPS (lpj=6651173) > Mount-cache hash table entries: 256 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > CPU0: Thermal monitoring enabled (TM2) > using mwait in idle threads. > ACPI: Core revision 20080926 > Setting APIC routing to flat > ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d > Booting processor 1 APIC 0x1 ip 0x6000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3991.24 BogoMIPS (lpj=6649999) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > CPU1: Thermal monitoring enabled (TM2) > x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 > CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d > checking TSC synchronization [CPU#0 -> CPU#1]: passed. > Brought up 2 CPUs > Total of 2 processors activated (7983.23 BogoMIPS). > CPU0 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 0 1 > CPU1 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 1 0 > net_namespace: 856 bytes > NET: Registered protocol family 16 > ACPI FADT declares the system doesn't support PCIe ASPM, so disable it > ACPI: bus type pci registered > PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > PCI: MCFG area at e0000000 reserved in E820 > PCI: Using MMCONFIG at e0000000 - efffffff > PCI: Using configuration type 1 for base access > ACPI: EC: Look up EC in DSDT > ACPI: BIOS _OSI(Linux) query ignored via DMI > ACPI: EC: non-query interrupt received, switching to interrupt mode > ACPI: Interpreter enabled > ACPI: (supports S0 S3 S4 S5) > ACPI: Using IOAPIC for interrupt routing > ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 > ACPI: EC: driver started in interrupt mode > ACPI: No dock devices found. > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci 0000:00:02.0: reg 10 64bit mmio: [0xfc000000-0xfc0fffff] > pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] > pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] > pci 0000:00:02.1: reg 10 64bit mmio: [0xfc100000-0xfc1fffff] > pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f] > pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f] > pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc604800-0xfc604bff] > pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold > pci 0000:00:1a.7: PME# disabled > pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc400000-0xfc403fff] > pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1b.0: PME# disabled > pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.0: PME# disabled > pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.1: PME# disabled > pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.2: PME# disabled > pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.4: PME# disabled > pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f] > pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f] > pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf] > pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc604c00-0xfc604fff] > pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > pci 0000:00:1d.7: PME# disabled > pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO > pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO > pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] > pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] > pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] > pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] > pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] > pci 0000:00:1f.2: reg 10 io port: [0x1c00-0x1c07] > pci 0000:00:1f.2: reg 14 io port: [0x18d4-0x18d7] > pci 0000:00:1f.2: reg 18 io port: [0x18d8-0x18df] > pci 0000:00:1f.2: reg 1c io port: [0x18d0-0x18d3] > pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] > pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc604000-0xfc6047ff] > pci 0000:00:1f.2: PME# supported from D3hot > pci 0000:00:1f.2: PME# disabled > pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] > pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f] > pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] > pci 0000:00:1c.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff] > pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff] > pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] > pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xf9ffffff] > pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff] > pci 0000:06:00.0: reg 10 64bit mmio: [0xfa000000-0xfa001fff] > pci 0000:06:00.0: PME# supported from D0 D3hot D3cold > pci 0000:06:00.0: PME# disabled > pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff] > pci 0000:00:1c.2: bridge 32bit mmio: [0xfa000000-0xfbffffff] > pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4000000-0xf5ffffff] > pci 0000:08:00.0: reg 10 64bit mmio: [0xfc200000-0xfc203fff] > pci 0000:08:00.0: reg 18 io port: [0x5000-0x50ff] > pci 0000:08:00.0: supports D1 D2 > pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:08:00.0: PME# disabled > pci 0000:00:1c.4: bridge io port: [0x5000-0x5fff] > pci 0000:00:1c.4: bridge 32bit mmio: [0xfc200000-0xfc2fffff] > pci 0000:09:03.0: reg 10 32bit mmio: [0xfc300000-0xfc300fff] > pci 0000:09:03.0: supports D1 D2 > pci 0000:09:03.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:09:03.0: PME# disabled > pci 0000:09:03.1: reg 10 32bit mmio: [0xfc302000-0xfc3027ff] > pci 0000:09:03.1: reg 14 32bit mmio: [0xfc304000-0xfc307fff] > pci 0000:09:03.1: supports D1 D2 > pci 0000:09:03.1: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:09:03.1: PME# disabled > pci 0000:09:03.2: reg 10 32bit mmio: [0xfc301000-0xfc301fff] > pci 0000:09:03.2: supports D1 D2 > pci 0000:09:03.2: PME# supported from D0 D1 D2 D3hot > pci 0000:09:03.2: PME# disabled > pci 0000:00:1e.0: transparent bridge > pci 0000:00:1e.0: bridge 32bit mmio: [0xfc300000-0xfc3fffff] > bus 00 -> node 0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 > ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 > ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 > ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 > PCI: Using ACPI for IRQ routing > cfg80211: Calling CRDA to update world regulatory domain > cfg80211: Failed calling CRDA > cfg80211: calling CRDA failed - unable to update world regulatory domain, using static definition > hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > hpet0: 3 comparators, 64-bit 14.318180 MHz counter > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 10 devices > ACPI: ACPI bus type pnp unregistered > system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved > system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved > system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved > system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved > system 00:01: iomem range 0xe0000000-0xefffffff has been reserved > system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved > system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved > system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved > system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved > system 00:06: ioport range 0x680-0x69f has been reserved > system 00:06: ioport range 0x800-0x80f has been reserved > system 00:06: ioport range 0x1000-0x107f has been reserved > system 00:06: ioport range 0x1180-0x11bf has been reserved > system 00:06: ioport range 0x1640-0x164f has been reserved > system 00:06: ioport range 0xfe00-0xfe7f has been reserved > system 00:06: ioport range 0xfe80-0xfeff has been reserved > pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 > pci 0000:00:1c.0: IO window: 0x2000-0x2fff > pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff > pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff > pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 > pci 0000:00:1c.1: IO window: 0x3000-0x3fff > pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff > pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff > pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06 > pci 0000:00:1c.2: IO window: 0x4000-0x4fff > pci 0000:00:1c.2: MEM window: 0xfa000000-0xfbffffff > pci 0000:00:1c.2: PREFETCH window: 0x000000f4000000-0x000000f5ffffff > pci 0000:00:1c.4: PCI bridge, secondary bus 0000:08 > pci 0000:00:1c.4: IO window: 0x5000-0x5fff > pci 0000:00:1c.4: MEM window: 0xfc200000-0xfc2fffff > pci 0000:00:1c.4: PREFETCH window: disabled > pci 0000:09:03.0: CardBus bridge, secondary bus 0000:0a > pci 0000:09:03.0: IO window: 0x006000-0x0060ff > pci 0000:09:03.0: IO window: 0x006400-0x0064ff > pci 0000:09:03.0: PREFETCH window: 0x88000000-0x8bffffff > pci 0000:09:03.0: MEM window: 0x90000000-0x93ffffff > pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 > pci 0000:00:1e.0: IO window: 0x6000-0x6fff > pci 0000:00:1e.0: MEM window: 0xfc300000-0xfc3fffff > pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff > pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.0: setting latency timer to 64 > pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:1c.1: setting latency timer to 64 > pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:1c.2: setting latency timer to 64 > pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.4: setting latency timer to 64 > pci 0000:00:1e.0: setting latency timer to 64 > pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > bus: 00 index 0 io port: [0x00-0xffff] > bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] > bus: 02 index 0 io port: [0x2000-0x2fff] > bus: 02 index 1 mmio: [0xf6000000-0xf7ffffff] > bus: 02 index 2 mmio: [0xf0000000-0xf1ffffff] > bus: 02 index 3 mmio: [0x0-0x0] > bus: 04 index 0 io port: [0x3000-0x3fff] > bus: 04 index 1 mmio: [0xf8000000-0xf9ffffff] > bus: 04 index 2 mmio: [0xf2000000-0xf3ffffff] > bus: 04 index 3 mmio: [0x0-0x0] > bus: 06 index 0 io port: [0x4000-0x4fff] > bus: 06 index 1 mmio: [0xfa000000-0xfbffffff] > bus: 06 index 2 mmio: [0xf4000000-0xf5ffffff] > bus: 06 index 3 mmio: [0x0-0x0] > bus: 08 index 0 io port: [0x5000-0x5fff] > bus: 08 index 1 mmio: [0xfc200000-0xfc2fffff] > bus: 08 index 2 mmio: [0x0-0x0] > bus: 08 index 3 mmio: [0x0-0x0] > bus: 09 index 0 io port: [0x6000-0x6fff] > bus: 09 index 1 mmio: [0xfc300000-0xfc3fffff] > bus: 09 index 2 mmio: [0x88000000-0x8bffffff] > bus: 09 index 3 io port: [0x00-0xffff] > bus: 09 index 4 mmio: [0x000000-0xffffffffffffffff] > bus: 0a index 0 io port: [0x6000-0x60ff] > bus: 0a index 1 io port: [0x6400-0x64ff] > bus: 0a index 2 mmio: [0x88000000-0x8bffffff] > bus: 0a index 3 mmio: [0x90000000-0x93ffffff] > NET: Registered protocol family 2 > IP route cache hash table entries: 65536 (order: 7, 524288 bytes) > TCP established hash table entries: 262144 (order: 10, 4194304 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 262144 bind 65536) > TCP reno registered > NET: Registered protocol family 1 > Unpacking initramfs... done > Freeing initrd memory: 2200k freed > Simple Boot Flag at 0x36 set to 0x1 > msgmni has been set to 4003 > alg: No test for stdrng (krng) > io scheduler noop registered > io scheduler cfq registered (default) > pci 0000:00:02.0: Boot video device > vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010100000, using 4000k, total 7616k > vesafb: mode is 1280x800x16, linelength=2560, pages=2 > vesafb: scrolling: redraw > vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 > Console: switching to colour frame buffer device 160x50 > fb0: VESA VGA frame buffer device > ACPI: AC Adapter [ADP1] (on-line) > ACPI: Battery Slot [BAT0] (battery present) > input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 > ACPI: Lid Switch [LID0] > input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 > ACPI: Power Button (CM) [PWRB] > acpi device:08: registered as cooling_device0 > acpi device:09: registered as cooling_device1 > input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/input/input2 > ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) > ACPI: SSDT 7F6D8C52, 02A1 (r1 Sony VAIO 20070704 PTL 20050624) > ACPI: SSDT 7F6D8709, 04B7 (r1 Sony VAIO 20070704 PTL 20050624)<7>Switched to high resolution mode on CPU 1 > > Switched to high resolution mode on CPU 0 > Monitor-Mwait will be used to enter C-1 state > Monitor-Mwait will be used to enter C-2 state > Monitor-Mwait will be used to enter C-3 state > ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) > processor ACPI_CPU:00: registered as cooling_device2 > ACPI: Processor [CPU0] (supports 8 throttling states) > ACPI: SSDT 7F6D8EF3, 00E4 (r1 Sony VAIO 20070704 PTL 20050624) > ACPI: SSDT 7F6D8BC0, 0092 (r1 Sony VAIO 20070704 PTL 20050624) > ACPI: EC: GPE storm detected, transactions will use polling mode > ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) > processor ACPI_CPU:01: registered as cooling_device3 > ACPI: Processor [CPU1] (supports 8 throttling states) > thermal LNXTHERM:01: registered as thermal_zone0 > ACPI: Thermal Zone [TZ00] (45 C) > thermal LNXTHERM:02: registered as thermal_zone1 > ACPI: Thermal Zone [TZ01] (45 C) > Generic RTC Driver v1.07 > Linux agpgart interface v0.103 > agpgart-intel 0000:00:00.0: Intel 965GM Chipset > agpgart-intel 0000:00:00.0: detected 7676K stolen memory > agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 > [drm] Initialized drm 1.1.0 20060810 > pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:02.0: setting latency timer to 64 > [drm] Initialized i915 1.6.0 20080730 on minor 0 > intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets > intelfb: Version 0.9.6 > intelfb: Cannot reserve FB region. > tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > sony-laptop: Sony Notebook Control Driver v0.6. > input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:29/SNY5001:00/input/input3 > input: Sony Vaio Jogdial as /devices/virtual/input/input4 > sony-laptop: detected Sony Vaio FZ Series > Uniform Multi-Platform E-IDE driver > ide-gd driver 1.18 > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > i8042.c: Detected active multiplexing controller, rev 1.1. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX0 port at 0x60,0x64 irq 12 > serio: i8042 AUX1 port at 0x60,0x64 irq 12 > serio: i8042 AUX2 port at 0x60,0x64 irq 12 > serio: i8042 AUX3 port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > cpuidle: using governor ladder > cpuidle: using governor menu > Marking TSC unstable due to TSC halts in idle > sdhci: Secure Digital Host Controller Interface driver > sdhci: Copyright(c) Pierre Ossman > Advanced Linux Sound Architecture Driver Version 1.0.18rc3. > ALSA device list: > No soundcards found. > ip_tables: (C) 2000-2006 Netfilter Core Team > TCP cubic registered > NET: Registered protocol family 17 > NET: Registered protocol family 15 > Freeing unused kernel memory: 320k freed > input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > ehci_hcd 0000:00:1a.7: setting latency timer to 64 > ehci_hcd 0000:00:1a.7: EHCI Host Controller > ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1a.7: debug port 1 > ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported > ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc604800 > ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 4 ports detected > ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > ehci_hcd 0000:00:1d.7: setting latency timer to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 > ehci_hcd 0000:00:1d.7: debug port 1 > ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported > ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc604c00 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input6 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 6 ports detected > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > uhci_hcd: USB Universal Host Controller Interface driver > uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > uhci_hcd 0000:00:1a.0: setting latency timer to 64 > uhci_hcd 0000:00:1a.0: UHCI Host Controller > uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input7 > hub 3-0:1.0: 2 ports detected > uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:1a.1: setting latency timer to 64 > uhci_hcd 0000:00:1a.1: UHCI Host Controller > uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > uhci_hcd 0000:00:1d.0: setting latency timer to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > uhci_hcd 0000:00:1d.1: setting latency timer to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 > uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 > usb usb6: configuration #1 chosen from 1 choice > hub 6-0:1.0: USB hub found > hub 6-0:1.0: 2 ports detected > uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > uhci_hcd 0000:00:1d.2: setting latency timer to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 > uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 > usb usb7: configuration #1 chosen from 1 choice > hub 7-0:1.0: USB hub found > hub 7-0:1.0: 2 ports detected > SCSI subsystem initialized > Driver 'sd' needs updating - please use bus_type methods > Clocksource tsc unstable (delta = -128025211 ns) > libata version 3.00 loaded. > ahci 0000:00:1f.2: version 3.0 > ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode > ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part > ahci 0000:00:1f.2: setting latency timer to 64 > scsi0 : ahci > scsi1 : ahci > scsi2 : ahci > ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed > ata2: DUMMY > ata3: DUMMY > usb 1-2: new high speed USB device using ehci_hcd and address 2 > usb 1-2: configuration #1 chosen from 1 choice > input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input8 > input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input9 > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: ATA-8: FUJITSU MHX2250BT, 0041000B, max UDMA/100 > ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: configured for UDMA/100 > scsi 0:0:0:0: Direct-Access ATA FUJITSU MHX2250B 0041 PQ: 0 ANSI: 5 > sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sda: sda1 sda2 < sda5 sda6 > > sd 0:0:0:0: [sda] Attached SCSI disk > ata_piix 0000:00:1f.1: version 2.12 > ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > ata_piix 0000:00:1f.1: setting latency timer to 64 > scsi3 : ata_piix > scsi4 : ata_piix > ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 > ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 > ata4.00: ATAPI: SONY DVD RW AW-G540A, 1.W0, max UDMA/33 > ata4.00: configured for UDMA/33 > isa bounce pool size: 16 pages > scsi 3:0:0:0: CD-ROM SONY DVD RW AW-G540A 1.W0 PQ: 0 ANSI: 5 > EXT3-fs: INFO: recovery required on readonly filesystem. > EXT3-fs: write access will be enabled during recovery. > kjournald starting. Commit interval 5 seconds > EXT3-fs: sda1: orphan cleanup on readonly fs > ext3_orphan_cleanup: deleting unreferenced inode 720331 > ext3_orphan_cleanup: deleting unreferenced inode 2013901 > EXT3-fs: sda1: 2 orphan inodes deleted > EXT3-fs: recovery complete. > EXT3-fs: mounted filesystem with ordered data mode. > Linux video capture interface: v2.00 > iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kd > iwlagn: Copyright(c) 2003-2008 Intel Corporation > iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > iwlagn 0000:06:00.0: setting latency timer to 64 > iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 > Driver 'sr' needs updating - please use bus_type methods > sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > sr 3:0:0:0: Attached scsi CD-ROM sr0 > i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 > sky2 driver version 1.22 > sky2 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > sky2 0000:08:00.0: setting latency timer to 64 > sky2 0000:08:00.0: Yukon-2 FE chip revision 1 > sd 0:0:0:0: Attached scsi generic sg0 type 0 > sr 3:0:0:0: Attached scsi generic sg1 type 5 > uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b) > iwlagn: Tunable channels: 11 802.11bg, 13 802.11a channels > sky2 0000:08:00.0: Marvell Yukon 88E8036 Fast Ethernet Controller > Part Number: Yukon 88E8036 > Engineering Level: Rev. 1.6 > Manufacturer: Marvell > uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26). > uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32 (exp. 26). > uvcvideo: Failed to initialize the device (-5). > usbcore: registered new interface driver uvcvideo > USB Video Class driver (v0.1.0) > sky2 eth0: addr 00:1a:80:4a:7f:37 > iwlagn 0000:06:00.0: PCI INT A disabled > phy0: Selected rate control algorithm 'iwl-agn-rs' > HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > HDA Intel 0000:00:1b.0: setting latency timer to 64 > ohci1394 0000:09:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8] > iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x40100102, writing 0x40100106) > iwlagn 0000:06:00.0: firmware: requesting iwlwifi-4965-2.ucode > Registered led device: iwl-phy0:radio > Registered led device: iwl-phy0:assoc > Registered led device: iwl-phy0:RX > Registered led device: iwl-phy0:TX > ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460302903fd0] > iwlagn: TX Power requested while scanning! > iwlagn: Error sending TX power (-11) > iwlagn 0000:06:00.0: PCI INT A disabled > Non-volatile memory driver v1.2 > EXT3 FS on sda1, internal journal > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda5, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > Adding 4281280k swap on /dev/sda6. Priority:-1 extents:1 across:4281280k > iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) > Registered led device: iwl-phy0:radio > Registered led device: iwl-phy0:assoc > Registered led device: iwl-phy0:RX > Registered led device: iwl-phy0:TX > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 > wlan0 direct probe responded > wlan0: authenticate with AP 00:0b:86:dd:92:01 > wlan0: authenticated > wlan0: associate with AP 00:0b:86:dd:92:01 > wlan0: RX AssocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1) > wlan0: associated > wlan0: deauthenticated > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 > wlan0 direct probe responded > wlan0: authenticate with AP 00:0b:86:dd:92:01 > wlan0: authenticated > wlan0: associate with AP 00:0b:86:dd:92:01 > wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1) > wlan0: associated > phy0: failed to restore operational channel after scan > evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html > ACPI: EC: missing confirmations, switch off interrupt mode. > evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html > process `skype' is using obsolete setsockopt SO_BSDCOMPAT > PM: Syncing filesystems ... done. > Freezing user space processes ... (elapsed 0.00 seconds) done. > Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. > Suspending console(s) (use no_console_suspend to debug) > sd 0:0:0:0: [sda] Synchronizing SCSI cache > sd 0:0:0:0: [sda] Stopping disk > ACPI handle has no context! > ACPI handle has no context! > tifm_7xx1 0000:09:03.2: PCI INT C disabled > ACPI handle has no context! > ACPI handle has no context! > iwlagn 0000:06:00.0: PCI INT A disabled > ahci 0000:00:1f.2: PCI INT B disabled > ata_piix 0000:00:1f.1: PCI INT A disabled > ehci_hcd 0000:00:1d.7: PCI INT A disabled > uhci_hcd 0000:00:1d.2: PCI INT C disabled > uhci_hcd 0000:00:1d.1: PCI INT B disabled > uhci_hcd 0000:00:1d.0: PCI INT A disabled > HDA Intel 0000:00:1b.0: PCI INT A disabled > ehci_hcd 0000:00:1a.7: PCI INT C disabled > uhci_hcd 0000:00:1a.1: PCI INT B disabled > uhci_hcd 0000:00:1a.0: PCI INT A disabled > ACPI: Preparing to enter system sleep state S3 > Disabling non-boot CPUs ... > CPU 1 is now offline > SMP alternatives: switching to UP code > CPU0 attaching NULL sched-domain. > CPU1 attaching NULL sched-domain. > CPU0 attaching NULL sched-domain. > CPU1 is down > Extended CMOS year: 2000 > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > Back to C! > Extended CMOS year: 2000 > Enabling non-boot CPUs ... > SMP alternatives: switching to SMP code > Booting processor 1 APIC 0x1 ip 0x6000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3991.24 BogoMIPS (lpj=6649998) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 > CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d > CPU0 attaching NULL sched-domain. > Switched to high resolution mode on CPU 1 > CPU0 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 0 1 > CPU1 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 1 0 > CPU1 is up > ACPI: Waking up from system sleep state S3 > sony-laptop: detected Sony Vaio FZ Series > pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:02.0: setting latency timer to 64 > uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > uhci_hcd 0000:00:1a.0: setting latency timer to 64 > usb usb3: root hub lost power or was reset > uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:1a.1: setting latency timer to 64 > usb usb4: root hub lost power or was reset > ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > ehci_hcd 0000:00:1a.7: setting latency timer to 64 > HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) > HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > HDA Intel 0000:00:1b.0: setting latency timer to 64 > pci 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) > pci 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20002020, writing 0x2020) > pci 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.0: setting latency timer to 64 > pci 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205) > pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201) > pci 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800) > pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x3030) > pci 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:1c.1: setting latency timer to 64 > pci 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40307) > pci 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401) > pci 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00) > pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040) > pci 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:1c.2: setting latency timer to 64 > pci 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) > pci 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) > pci 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20) > pci 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050) > pci 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.4: setting latency timer to 64 > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > uhci_hcd 0000:00:1d.0: setting latency timer to 64 > usb usb5: root hub lost power or was reset > uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > uhci_hcd 0000:00:1d.1: setting latency timer to 64 > usb usb6: root hub lost power or was reset > uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > uhci_hcd 0000:00:1d.2: setting latency timer to 64 > usb usb7: root hub lost power or was reset > ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > ehci_hcd 0000:00:1d.7: setting latency timer to 64 > pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x8bf18801) > pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc30fc30) > pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22806060) > pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107) > pci 0000:00:1e.0: setting latency timer to 64 > ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) > ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005) > ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > ata_piix 0000:00:1f.1: setting latency timer to 64 > ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) > ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > ahci 0000:00:1f.2: setting latency timer to 64 > i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x8c000000) > iwlagn 0000:06:00.0: enabling device (0000 -> 0002) > iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > iwlagn 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) > iwlagn 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa000004) > iwlagn 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100106) > sky2 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) > sky2 0000:08:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x5001) > sky2 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc200004) > sky2 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > sky2 0000:08:00.0: restoring config space at offset 0x1 (was 0x40100000, writing 0x100107) > pci 0000:09:03.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x3440105) > pci 0000:09:03.0: restoring config space at offset 0xe (was 0x0, writing 0x64fc) > pci 0000:09:03.0: restoring config space at offset 0xd (was 0x0, writing 0x6400) > pci 0000:09:03.0: restoring config space at offset 0xc (was 0x0, writing 0x60fc) > pci 0000:09:03.0: restoring config space at offset 0xb (was 0x0, writing 0x6000) > pci 0000:09:03.0: restoring config space at offset 0xa (was 0x0, writing 0x93fff000) > pci 0000:09:03.0: restoring config space at offset 0x9 (was 0x0, writing 0x90000000) > pci 0000:09:03.0: restoring config space at offset 0x8 (was 0x0, writing 0x8bfff000) > pci 0000:09:03.0: restoring config space at offset 0x7 (was 0x0, writing 0x88000000) > pci 0000:09:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb00d0a09) > pci 0000:09:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc300000) > pci 0000:09:03.0: restoring config space at offset 0x3 (was 0x820000, writing 0x823110) > pci 0000:09:03.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100107) > pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > ohci1394 0000:09:03.1: restoring config space at offset 0xf (was 0x4030200, writing 0x403020a) > ohci1394 0000:09:03.1: restoring config space at offset 0x5 (was 0x0, writing 0xfc304000) > ohci1394 0000:09:03.1: restoring config space at offset 0x4 (was 0x0, writing 0xfc302000) > ohci1394 0000:09:03.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) > ohci1394 0000:09:03.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116) > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8] > tifm_7xx1 0000:09:03.2: restoring config space at offset 0xf (was 0x40703ff, writing 0x4070307) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x4 (was 0x0, writing 0xfc301000) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x3 (was 0x800000, writing 0x803910) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) > tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:02.0: setting latency timer to 64 > ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out > ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out > ata4.00: configured for UDMA/33 > Registered led device: iwl-phy0:radio > Registered led device: iwl-phy0:assoc > Registered led device: iwl-phy0:RX > Registered led device: iwl-phy0:TX > sd 0:0:0:0: [sda] Starting disk > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: configured for UDMA/100 > sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > Restarting tasks ... done. > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 > wlan0 direct probe responded > wlan0: authenticate with AP 00:0b:86:dd:92:01 > wlan0: authenticated > wlan0: associate with AP 00:0b:86:dd:92:01 > wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1) > wlan0: associated > evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html > ACPI: EC: missing confirmations, switch off interrupt mode. > PM: Syncing filesystems ... done. > Freezing user space processes ... (elapsed 0.00 seconds) done. > Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. > Suspending console(s) (use no_console_suspend to debug) > sd 0:0:0:0: [sda] Synchronizing SCSI cache > sd 0:0:0:0: [sda] Stopping disk > ACPI handle has no context! > ACPI handle has no context! > tifm_7xx1 0000:09:03.2: PCI INT C disabled > ACPI handle has no context! > ACPI handle has no context! > iwlagn 0000:06:00.0: PCI INT A disabled > ahci 0000:00:1f.2: PCI INT B disabled > ata_piix 0000:00:1f.1: PCI INT A disabled > ehci_hcd 0000:00:1d.7: PCI INT A disabled > uhci_hcd 0000:00:1d.2: PCI INT C disabled > uhci_hcd 0000:00:1d.1: PCI INT B disabled > uhci_hcd 0000:00:1d.0: PCI INT A disabled > HDA Intel 0000:00:1b.0: PCI INT A disabled > ehci_hcd 0000:00:1a.7: PCI INT C disabled > uhci_hcd 0000:00:1a.1: PCI INT B disabled > uhci_hcd 0000:00:1a.0: PCI INT A disabled > ACPI: Preparing to enter system sleep state S3 > Disabling non-boot CPUs ... > CPU 1 is now offline > SMP alternatives: switching to UP code > CPU0 attaching NULL sched-domain. > CPU1 attaching NULL sched-domain. > CPU0 attaching NULL sched-domain. > CPU1 is down > Extended CMOS year: 2000 > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > Back to C! > Extended CMOS year: 2000 > Enabling non-boot CPUs ... > SMP alternatives: switching to SMP code > Booting processor 1 APIC 0x1 ip 0x6000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3991.31 BogoMIPS (lpj=6650107) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 > CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d > CPU0 attaching NULL sched-domain. > Switched to high resolution mode on CPU 1 > CPU0 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 0 1 > CPU1 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 1 0 > CPU1 is up > ACPI: Waking up from system sleep state S3 > sony-laptop: detected Sony Vaio FZ Series > pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:02.0: setting latency timer to 64 > uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > uhci_hcd 0000:00:1a.0: setting latency timer to 64 > usb usb3: root hub lost power or was reset > uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:1a.1: setting latency timer to 64 > usb usb4: root hub lost power or was reset > ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > ehci_hcd 0000:00:1a.7: setting latency timer to 64 > HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) > HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > HDA Intel 0000:00:1b.0: setting latency timer to 64 > pci 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) > pci 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.0: setting latency timer to 64 > pci 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205) > pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201) > pci 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800) > pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x3030) > pci 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:1c.1: setting latency timer to 64 > pci 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40307) > pci 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401) > pci 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00) > pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x20004040) > pci 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:1c.2: setting latency timer to 64 > pci 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) > pci 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) > pci 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20) > pci 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x20005050) > pci 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.4: setting latency timer to 64 > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > uhci_hcd 0000:00:1d.0: setting latency timer to 64 > usb usb5: root hub lost power or was reset > uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > uhci_hcd 0000:00:1d.1: setting latency timer to 64 > usb usb6: root hub lost power or was reset > uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > uhci_hcd 0000:00:1d.2: setting latency timer to 64 > usb usb7: root hub lost power or was reset > ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > ehci_hcd 0000:00:1d.7: setting latency timer to 64 > pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x8bf18801) > pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc30fc30) > pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22806060) > pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107) > pci 0000:00:1e.0: setting latency timer to 64 > ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) > ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005) > ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > ata_piix 0000:00:1f.1: setting latency timer to 64 > ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) > ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > ahci 0000:00:1f.2: setting latency timer to 64 > i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x8c000000) > iwlagn 0000:06:00.0: enabling device (0000 -> 0002) > iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > iwlagn 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) > iwlagn 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa000004) > iwlagn 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100106) > sky2 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) > sky2 0000:08:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x5001) > sky2 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc200004) > sky2 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > sky2 0000:08:00.0: restoring config space at offset 0x1 (was 0x40100000, writing 0x100107) > pci 0000:09:03.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x3440105) > pci 0000:09:03.0: restoring config space at offset 0xe (was 0x0, writing 0x64fc) > pci 0000:09:03.0: restoring config space at offset 0xd (was 0x0, writing 0x6400) > pci 0000:09:03.0: restoring config space at offset 0xc (was 0x0, writing 0x60fc) > pci 0000:09:03.0: restoring config space at offset 0xb (was 0x0, writing 0x6000) > pci 0000:09:03.0: restoring config space at offset 0xa (was 0x0, writing 0x93fff000) > pci 0000:09:03.0: restoring config space at offset 0x9 (was 0x0, writing 0x90000000) > pci 0000:09:03.0: restoring config space at offset 0x8 (was 0x0, writing 0x8bfff000) > pci 0000:09:03.0: restoring config space at offset 0x7 (was 0x0, writing 0x88000000) > pci 0000:09:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb00d0a09) > pci 0000:09:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc300000) > pci 0000:09:03.0: restoring config space at offset 0x3 (was 0x820000, writing 0x823110) > pci 0000:09:03.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100107) > pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > ohci1394 0000:09:03.1: restoring config space at offset 0xf (was 0x4030200, writing 0x403020a) > ohci1394 0000:09:03.1: restoring config space at offset 0x5 (was 0x0, writing 0xfc304000) > ohci1394 0000:09:03.1: restoring config space at offset 0x4 (was 0x0, writing 0xfc302000) > ohci1394 0000:09:03.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) > ohci1394 0000:09:03.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116) > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8] > tifm_7xx1 0000:09:03.2: restoring config space at offset 0xf (was 0x40703ff, writing 0x4070307) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x4 (was 0x0, writing 0xfc301000) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x3 (was 0x800000, writing 0x803910) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) > tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:02.0: setting latency timer to 64 > ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out > ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out > ata4.00: configured for UDMA/33 > Registered led device: iwl-phy0:radio > Registered led device: iwl-phy0:assoc > Registered led device: iwl-phy0:RX > Registered led device: iwl-phy0:TX > sd 0:0:0:0: [sda] Starting disk > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: configured for UDMA/100 > sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > Restarting tasks ... done. > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 > wlan0 direct probe responded > wlan0: authenticate with AP 00:0b:86:dd:92:01 > wlan0: authenticated > wlan0: associate with AP 00:0b:86:dd:92:01 > wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1) > wlan0: associated > phy0: failed to restore operational channel after scan > evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html > PM: Syncing filesystems ... done. > Freezing user space processes ... (elapsed 0.00 seconds) done. > Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. > Suspending console(s) (use no_console_suspend to debug) > sd 0:0:0:0: [sda] Synchronizing SCSI cache > sd 0:0:0:0: [sda] Stopping disk > ACPI handle has no context! > ACPI handle has no context! > tifm_7xx1 0000:09:03.2: PCI INT C disabled > ACPI handle has no context! > ACPI handle has no context! > iwlagn 0000:06:00.0: PCI INT A disabled > ahci 0000:00:1f.2: PCI INT B disabled > ata_piix 0000:00:1f.1: PCI INT A disabled > ehci_hcd 0000:00:1d.7: PCI INT A disabled > uhci_hcd 0000:00:1d.2: PCI INT C disabled > uhci_hcd 0000:00:1d.1: PCI INT B disabled > uhci_hcd 0000:00:1d.0: PCI INT A disabled > HDA Intel 0000:00:1b.0: PCI INT A disabled > ehci_hcd 0000:00:1a.7: PCI INT C disabled > uhci_hcd 0000:00:1a.1: PCI INT B disabled > uhci_hcd 0000:00:1a.0: PCI INT A disabled > ACPI: Preparing to enter system sleep state S3 > Disabling non-boot CPUs ... > CPU 1 is now offline > SMP alternatives: switching to UP code > CPU0 attaching NULL sched-domain. > CPU1 attaching NULL sched-domain. > CPU0 attaching NULL sched-domain. > CPU1 is down > Extended CMOS year: 2000 > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > Back to C! > Extended CMOS year: 2000 > Enabling non-boot CPUs ... > SMP alternatives: switching to SMP code > Booting processor 1 APIC 0x1 ip 0x6000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3991.29 BogoMIPS (lpj=6650066) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 > CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d > CPU0 attaching NULL sched-domain. > Switched to high resolution mode on CPU 1 > CPU0 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 0 1 > CPU1 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 1 0 > CPU1 is up > ACPI: Waking up from system sleep state S3 > sony-laptop: detected Sony Vaio FZ Series > pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:02.0: setting latency timer to 64 > uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > uhci_hcd 0000:00:1a.0: setting latency timer to 64 > usb usb3: root hub lost power or was reset > uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:1a.1: setting latency timer to 64 > usb usb4: root hub lost power or was reset > ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > ehci_hcd 0000:00:1a.7: setting latency timer to 64 > HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) > HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > HDA Intel 0000:00:1b.0: setting latency timer to 64 > pci 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) > pci 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.0: setting latency timer to 64 > pci 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205) > pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201) > pci 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800) > pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x3030) > pci 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:1c.1: setting latency timer to 64 > pci 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40307) > pci 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401) > pci 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00) > pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040) > pci 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:1c.2: setting latency timer to 64 > pci 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) > pci 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) > pci 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20) > pci 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050) > pci 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.4: setting latency timer to 64 > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > uhci_hcd 0000:00:1d.0: setting latency timer to 64 > usb usb5: root hub lost power or was reset > uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > uhci_hcd 0000:00:1d.1: setting latency timer to 64 > usb usb6: root hub lost power or was reset > uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > uhci_hcd 0000:00:1d.2: setting latency timer to 64 > usb usb7: root hub lost power or was reset > ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > ehci_hcd 0000:00:1d.7: setting latency timer to 64 > pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x8bf18801) > pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc30fc30) > pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22806060) > pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107) > pci 0000:00:1e.0: setting latency timer to 64 > ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) > ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005) > ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > ata_piix 0000:00:1f.1: setting latency timer to 64 > ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) > ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > ahci 0000:00:1f.2: setting latency timer to 64 > i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x8c000000) > iwlagn 0000:06:00.0: enabling device (0000 -> 0002) > iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > iwlagn 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) > iwlagn 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa000004) > iwlagn 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100106) > sky2 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) > sky2 0000:08:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x5001) > sky2 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc200004) > sky2 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > sky2 0000:08:00.0: restoring config space at offset 0x1 (was 0x40100000, writing 0x100107) > pci 0000:09:03.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x3440105) > pci 0000:09:03.0: restoring config space at offset 0xe (was 0x0, writing 0x64fc) > pci 0000:09:03.0: restoring config space at offset 0xd (was 0x0, writing 0x6400) > pci 0000:09:03.0: restoring config space at offset 0xc (was 0x0, writing 0x60fc) > pci 0000:09:03.0: restoring config space at offset 0xb (was 0x0, writing 0x6000) > pci 0000:09:03.0: restoring config space at offset 0xa (was 0x0, writing 0x93fff000) > pci 0000:09:03.0: restoring config space at offset 0x9 (was 0x0, writing 0x90000000) > pci 0000:09:03.0: restoring config space at offset 0x8 (was 0x0, writing 0x8bfff000) > pci 0000:09:03.0: restoring config space at offset 0x7 (was 0x0, writing 0x88000000) > pci 0000:09:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb00d0a09) > pci 0000:09:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc300000) > pci 0000:09:03.0: restoring config space at offset 0x3 (was 0x820000, writing 0x823110) > pci 0000:09:03.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100107) > pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > ohci1394 0000:09:03.1: restoring config space at offset 0xf (was 0x4030200, writing 0x403020a) > ohci1394 0000:09:03.1: restoring config space at offset 0x5 (was 0x0, writing 0xfc304000) > ohci1394 0000:09:03.1: restoring config space at offset 0x4 (was 0x0, writing 0xfc302000) > ohci1394 0000:09:03.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) > ohci1394 0000:09:03.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116) > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8] > tifm_7xx1 0000:09:03.2: restoring config space at offset 0xf (was 0x40703ff, writing 0x4070307) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x4 (was 0x0, writing 0xfc301000) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x3 (was 0x800000, writing 0x803910) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) > tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:02.0: setting latency timer to 64 > ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out > ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out > ata4.00: configured for UDMA/33 > Registered led device: iwl-phy0:radio > Registered led device: iwl-phy0:assoc > Registered led device: iwl-phy0:RX > Registered led device: iwl-phy0:TX > sd 0:0:0:0: [sda] Starting disk > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: configured for UDMA/100 > sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > Restarting tasks ... <7>wlan0: deauthenticating by local choice (reason=1) > done. > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 > wlan0 direct probe responded > wlan0: authenticate with AP 00:0b:86:dd:92:01 > wlan0: authenticated > wlan0: associate with AP 00:0b:86:dd:92:01 > wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1) > wlan0: associated > evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html > wlan0: deauthenticated > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 > wlan0 direct probe responded > wlan0: authenticate with AP 00:0b:86:dd:92:01 > wlan0: authenticated > wlan0: associate with AP 00:0b:86:dd:92:01 > wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1) > wlan0: associated > phy0: failed to restore operational channel after scan > ACPI: EC: missing confirmations, switch off interrupt mode. > PM: Syncing filesystems ... done. > Freezing user space processes ... (elapsed 0.00 seconds) done. > Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. > Suspending console(s) (use no_console_suspend to debug) > sd 0:0:0:0: [sda] Synchronizing SCSI cache > sd 0:0:0:0: [sda] Stopping disk > ACPI handle has no context! > ACPI handle has no context! > tifm_7xx1 0000:09:03.2: PCI INT C disabled > ACPI handle has no context! > ACPI handle has no context! > iwlagn 0000:06:00.0: PCI INT A disabled > ahci 0000:00:1f.2: PCI INT B disabled > ata_piix 0000:00:1f.1: PCI INT A disabled > ehci_hcd 0000:00:1d.7: PCI INT A disabled > uhci_hcd 0000:00:1d.2: PCI INT C disabled > uhci_hcd 0000:00:1d.1: PCI INT B disabled > uhci_hcd 0000:00:1d.0: PCI INT A disabled > HDA Intel 0000:00:1b.0: PCI INT A disabled > ehci_hcd 0000:00:1a.7: PCI INT C disabled > uhci_hcd 0000:00:1a.1: PCI INT B disabled > uhci_hcd 0000:00:1a.0: PCI INT A disabled > ACPI: Preparing to enter system sleep state S3 > Disabling non-boot CPUs ... > CPU 1 is now offline > SMP alternatives: switching to UP code > CPU0 attaching NULL sched-domain. > CPU1 attaching NULL sched-domain. > CPU0 attaching NULL sched-domain. > CPU1 is down > Extended CMOS year: 2000 > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > Back to C! > Extended CMOS year: 2000 > Enabling non-boot CPUs ... > SMP alternatives: switching to SMP code > Booting processor 1 APIC 0x1 ip 0x6000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3991.30 BogoMIPS (lpj=6650083) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 > CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d > CPU0 attaching NULL sched-domain. > Switched to high resolution mode on CPU 1 > CPU0 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 0 1 > CPU1 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 1 0 > CPU1 is up > ACPI: Waking up from system sleep state S3 > sony-laptop: detected Sony Vaio FZ Series > pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:02.0: setting latency timer to 64 > uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > uhci_hcd 0000:00:1a.0: setting latency timer to 64 > usb usb3: root hub lost power or was reset > uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:1a.1: setting latency timer to 64 > usb usb4: root hub lost power or was reset > ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > ehci_hcd 0000:00:1a.7: setting latency timer to 64 > HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) > HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > HDA Intel 0000:00:1b.0: setting latency timer to 64 > pci 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) > pci 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.0: setting latency timer to 64 > pci 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205) > pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201) > pci 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800) > pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x3030) > pci 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:1c.1: setting latency timer to 64 > pci 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40307) > pci 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401) > pci 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00) > pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x20004040) > pci 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:1c.2: setting latency timer to 64 > pci 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) > pci 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) > pci 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20) > pci 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x20005050) > pci 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.4: setting latency timer to 64 > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > uhci_hcd 0000:00:1d.0: setting latency timer to 64 > usb usb5: root hub lost power or was reset > uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > uhci_hcd 0000:00:1d.1: setting latency timer to 64 > usb usb6: root hub lost power or was reset > uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > uhci_hcd 0000:00:1d.2: setting latency timer to 64 > usb usb7: root hub lost power or was reset > ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > ehci_hcd 0000:00:1d.7: setting latency timer to 64 > pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x8bf18801) > pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc30fc30) > pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22806060) > pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107) > pci 0000:00:1e.0: setting latency timer to 64 > ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) > ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005) > ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > ata_piix 0000:00:1f.1: setting latency timer to 64 > ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) > ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > ahci 0000:00:1f.2: setting latency timer to 64 > i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x8c000000) > iwlagn 0000:06:00.0: enabling device (0000 -> 0002) > iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > iwlagn 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) > iwlagn 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa000004) > iwlagn 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100106) > sky2 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) > sky2 0000:08:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x5001) > sky2 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc200004) > sky2 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > sky2 0000:08:00.0: restoring config space at offset 0x1 (was 0x40100000, writing 0x100107) > pci 0000:09:03.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x3440105) > pci 0000:09:03.0: restoring config space at offset 0xe (was 0x0, writing 0x64fc) > pci 0000:09:03.0: restoring config space at offset 0xd (was 0x0, writing 0x6400) > pci 0000:09:03.0: restoring config space at offset 0xc (was 0x0, writing 0x60fc) > pci 0000:09:03.0: restoring config space at offset 0xb (was 0x0, writing 0x6000) > pci 0000:09:03.0: restoring config space at offset 0xa (was 0x0, writing 0x93fff000) > pci 0000:09:03.0: restoring config space at offset 0x9 (was 0x0, writing 0x90000000) > pci 0000:09:03.0: restoring config space at offset 0x8 (was 0x0, writing 0x8bfff000) > pci 0000:09:03.0: restoring config space at offset 0x7 (was 0x0, writing 0x88000000) > pci 0000:09:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb00d0a09) > pci 0000:09:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc300000) > pci 0000:09:03.0: restoring config space at offset 0x3 (was 0x820000, writing 0x823110) > pci 0000:09:03.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100107) > pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > ohci1394 0000:09:03.1: restoring config space at offset 0xf (was 0x4030200, writing 0x403020a) > ohci1394 0000:09:03.1: restoring config space at offset 0x5 (was 0x0, writing 0xfc304000) > ohci1394 0000:09:03.1: restoring config space at offset 0x4 (was 0x0, writing 0xfc302000) > ohci1394 0000:09:03.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) > ohci1394 0000:09:03.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116) > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8] > tifm_7xx1 0000:09:03.2: restoring config space at offset 0xf (was 0x40703ff, writing 0x4070307) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x4 (was 0x0, writing 0xfc301000) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x3 (was 0x800000, writing 0x803910) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) > tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:02.0: setting latency timer to 64 > ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out > ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out > ata4.00: configured for UDMA/33 > Registered led device: iwl-phy0:radio > Registered led device: iwl-phy0:assoc > Registered led device: iwl-phy0:RX > Registered led device: iwl-phy0:TX > sd 0:0:0:0: [sda] Starting disk > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: configured for UDMA/100 > sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > Restarting tasks ... done. > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 > wlan0 direct probe responded > wlan0: authenticate with AP 00:0b:86:dd:92:01 > wlan0: authenticated > wlan0: associate with AP 00:0b:86:dd:92:01 > wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1) > wlan0: associated > evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html > hub 2-0:1.0: unable to enumerate USB device on port 2 > usb 2-2: new high speed USB device using ehci_hcd and address 3 > usb 2-2: configuration #1 chosen from 1 choice > Initializing USB Mass Storage driver... > scsi5 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 3 > usb-storage: waiting for device to settle before scanning > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > scsi 5:0:0:0: Direct-Access SanDisk Sansa Clip 8GB v02. PQ: 0 ANSI: 0 > sd 5:0:0:0: [sdb] 15993856 512-byte hardware sectors: (8.18 GB/7.62 GiB) > sd 5:0:0:0: [sdb] Write Protect is off > sd 5:0:0:0: [sdb] Mode Sense: 04 00 00 00 > sd 5:0:0:0: [sdb] Assuming drive cache: write through > sd 5:0:0:0: [sdb] 15993856 512-byte hardware sectors: (8.18 GB/7.62 GiB) > sd 5:0:0:0: [sdb] Write Protect is off > sd 5:0:0:0: [sdb] Mode Sense: 04 00 00 00 > sd 5:0:0:0: [sdb] Assuming drive cache: write through > sdb: > sd 5:0:0:0: [sdb] Attached SCSI removable disk > sd 5:0:0:0: Attached scsi generic sg2 type 0 > usb-storage: device scan complete > usb 2-2: USB disconnect, address 3 > PM: Syncing filesystems ... done. > Freezing user space processes ... (elapsed 0.05 seconds) done. > Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. > Suspending console(s) (use no_console_suspend to debug) > sd 0:0:0:0: [sda] Synchronizing SCSI cache > sd 0:0:0:0: [sda] Stopping disk > ACPI handle has no context! > ACPI handle has no context! > tifm_7xx1 0000:09:03.2: PCI INT C disabled > ACPI handle has no context! > ACPI handle has no context! > iwlagn 0000:06:00.0: PCI INT A disabled > ahci 0000:00:1f.2: PCI INT B disabled > ata_piix 0000:00:1f.1: PCI INT A disabled > ehci_hcd 0000:00:1d.7: PCI INT A disabled > uhci_hcd 0000:00:1d.2: PCI INT C disabled > uhci_hcd 0000:00:1d.1: PCI INT B disabled > uhci_hcd 0000:00:1d.0: PCI INT A disabled > HDA Intel 0000:00:1b.0: PCI INT A disabled > ehci_hcd 0000:00:1a.7: PCI INT C disabled > uhci_hcd 0000:00:1a.1: PCI INT B disabled > uhci_hcd 0000:00:1a.0: PCI INT A disabled > ACPI: Preparing to enter system sleep state S3 > Disabling non-boot CPUs ... > CPU 1 is now offline > SMP alternatives: switching to UP code > CPU0 attaching NULL sched-domain. > CPU1 attaching NULL sched-domain. > CPU0 attaching NULL sched-domain. > CPU1 is down > Extended CMOS year: 2000 > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > Back to C! > Extended CMOS year: 2000 > Enabling non-boot CPUs ... > SMP alternatives: switching to SMP code > Booting processor 1 APIC 0x1 ip 0x6000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3991.26 BogoMIPS (lpj=6650021) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 > CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d > CPU0 attaching NULL sched-domain. > Switched to high resolution mode on CPU 1 > CPU0 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 0 1 > CPU1 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 1 0 > CPU1 is up > ACPI: Waking up from system sleep state S3 > sony-laptop: detected Sony Vaio FZ Series > pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:02.0: setting latency timer to 64 > uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > uhci_hcd 0000:00:1a.0: setting latency timer to 64 > usb usb3: root hub lost power or was reset > uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:1a.1: setting latency timer to 64 > usb usb4: root hub lost power or was reset > ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > ehci_hcd 0000:00:1a.7: setting latency timer to 64 > HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) > HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > HDA Intel 0000:00:1b.0: setting latency timer to 64 > pci 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) > pci 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.0: setting latency timer to 64 > pci 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205) > pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201) > pci 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800) > pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x3030) > pci 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:1c.1: setting latency timer to 64 > pci 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40307) > pci 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401) > pci 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00) > pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040) > pci 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:1c.2: setting latency timer to 64 > pci 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) > pci 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) > pci 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20) > pci 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050) > pci 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.4: setting latency timer to 64 > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > uhci_hcd 0000:00:1d.0: setting latency timer to 64 > usb usb5: root hub lost power or was reset > uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > uhci_hcd 0000:00:1d.1: setting latency timer to 64 > usb usb6: root hub lost power or was reset > uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > uhci_hcd 0000:00:1d.2: setting latency timer to 64 > usb usb7: root hub lost power or was reset > ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > ehci_hcd 0000:00:1d.7: setting latency timer to 64 > pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x8bf18801) > pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc30fc30) > pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22806060) > pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107) > pci 0000:00:1e.0: setting latency timer to 64 > ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) > ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005) > ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > ata_piix 0000:00:1f.1: setting latency timer to 64 > ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) > ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > ahci 0000:00:1f.2: setting latency timer to 64 > i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x8c000000) > iwlagn 0000:06:00.0: enabling device (0000 -> 0002) > iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > iwlagn 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) > iwlagn 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa000004) > iwlagn 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100106) > sky2 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) > sky2 0000:08:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x5001) > sky2 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc200004) > sky2 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > sky2 0000:08:00.0: restoring config space at offset 0x1 (was 0x40100000, writing 0x100107) > pci 0000:09:03.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x3440105) > pci 0000:09:03.0: restoring config space at offset 0xe (was 0x0, writing 0x64fc) > pci 0000:09:03.0: restoring config space at offset 0xd (was 0x0, writing 0x6400) > pci 0000:09:03.0: restoring config space at offset 0xc (was 0x0, writing 0x60fc) > pci 0000:09:03.0: restoring config space at offset 0xb (was 0x0, writing 0x6000) > pci 0000:09:03.0: restoring config space at offset 0xa (was 0x0, writing 0x93fff000) > pci 0000:09:03.0: restoring config space at offset 0x9 (was 0x0, writing 0x90000000) > pci 0000:09:03.0: restoring config space at offset 0x8 (was 0x0, writing 0x8bfff000) > pci 0000:09:03.0: restoring config space at offset 0x7 (was 0x0, writing 0x88000000) > pci 0000:09:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb00d0a09) > pci 0000:09:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc300000) > pci 0000:09:03.0: restoring config space at offset 0x3 (was 0x820000, writing 0x823110) > pci 0000:09:03.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100107) > pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > ohci1394 0000:09:03.1: restoring config space at offset 0xf (was 0x4030200, writing 0x403020a) > ohci1394 0000:09:03.1: restoring config space at offset 0x5 (was 0x0, writing 0xfc304000) > ohci1394 0000:09:03.1: restoring config space at offset 0x4 (was 0x0, writing 0xfc302000) > ohci1394 0000:09:03.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) > ohci1394 0000:09:03.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116) > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8] > tifm_7xx1 0000:09:03.2: restoring config space at offset 0xf (was 0x40703ff, writing 0x4070307) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x4 (was 0x0, writing 0xfc301000) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x3 (was 0x800000, writing 0x803910) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) > tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:02.0: setting latency timer to 64 > ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out > ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out > ata4.00: configured for UDMA/33 > Registered led device: iwl-phy0:radio > Registered led device: iwl-phy0:assoc > Registered led device: iwl-phy0:RX > Registered led device: iwl-phy0:TX > sd 0:0:0:0: [sda] Starting disk > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: configured for UDMA/100 > sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > Restarting tasks ... <7>wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 > done. > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 2 > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 3 > wlan0: direct probe to AP 00:0b:86:dd:92:01 timed out > wlan0: direct probe to AP 00:0b:86:28:1a:d1 try 1 > wlan0: direct probe to AP 00:0b:86:28:1a:d1 try 1 > wlan0 direct probe responded > wlan0: authenticate with AP 00:0b:86:28:1a:d1 > wlan0: authenticated > wlan0: associate with AP 00:0b:86:28:1a:d1 > wlan0: RX ReassocResp from 00:0b:86:28:1a:d1 (capab=0x431 status=0 aid=1) > wlan0: associated > evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html > wlan0: deauthenticated > wlan0: direct probe to AP 00:0b:86:28:1a:d1 try 1 > wlan0: direct probe to AP 00:0b:86:28:1a:d1 try 2 > wlan0 direct probe responded > wlan0: authenticate with AP 00:0b:86:28:1a:d1 > wlan0: authenticated > wlan0: associate with AP 00:0b:86:28:1a:d1 > wlan0: RX ReassocResp from 00:0b:86:28:1a:d1 (capab=0x431 status=0 aid=1) > wlan0: associated > phy0: failed to restore operational channel after scan > phy0: failed to restore operational channel after scan > wlan0: direct probe to AP 00:0b:86:28:21:71 try 1 > wlan0: direct probe to AP 00:0b:86:28:21:71 try 1 > wlan0 direct probe responded > wlan0: authenticate with AP 00:0b:86:28:21:71 > wlan0: authenticated > wlan0: associate with AP 00:0b:86:28:21:71 > wlan0: associate with AP 00:0b:86:28:21:71 > wlan0: RX ReassocResp from 00:0b:86:28:21:71 (capab=0x431 status=0 aid=1) > wlan0: associated > ACPI: EC: missing confirmations, switch off interrupt mode. > iwlagn 0000:06:00.0: PCI INT A disabled > iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) > Registered led device: iwl-phy0:radio > Registered led device: iwl-phy0:assoc > Registered led device: iwl-phy0:RX > Registered led device: iwl-phy0:TX > iwlagn 0000:06:00.0: PCI INT A disabled > iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) > Registered led device: iwl-phy0:radio > Registered led device: iwl-phy0:assoc > Registered led device: iwl-phy0:RX > Registered led device: iwl-phy0:TX > wlan0: direct probe to AP 00:0b:86:3e:10:31 try 1 > wlan0: direct probe to AP 00:0b:86:3e:10:31 try 1 > wlan0 direct probe responded > wlan0: authenticate with AP 00:0b:86:3e:10:31 > wlan0: authenticated > wlan0: associate with AP 00:0b:86:3e:10:31 > wlan0: RX AssocResp from 00:0b:86:3e:10:31 (capab=0x431 status=0 aid=1) > wlan0: associated > wlan0: deauthenticating by local choice (reason=3) > iwlagn 0000:06:00.0: PCI INT A disabled > iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) > general protection fault: 0000 [#1] SMP > last sysfs file: /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq > CPU 1 > Modules linked in: nls_iso8859_1 nls_cp437 vfat fat usb_storage xt_comment xt_policy xt_tcpmss xt_pkttype xt_owner xt_NFQUEUE xt_NFLOG xt_multiport xt_MARK xt_mark xt_mac xt_limit xt_length xt_iprange xt_hashlimit xt_dscp xt_dccp xt_CLASSIFY snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss nvram ohci1394 ieee1394 snd_hda_intel uvcvideo snd_pcm sg sky2 i2c_i801 sr_mod iwlagn compat_ioctl32 snd_timer evdev videodev snd_page_alloc v4l1_compat snd_hwdep ata_piix ahci libata sd_mod scsi_mod uhci_hcd ohci_hcd ehci_hcd usbcore [last unloaded: scsi_wait_scan] > Pid: 3163, comm: ifplugd Not tainted 2.6.28-rc4-keypress-00322-g58e20d8 #14 > RIP: 0010:[<ffffffff803d844b>] [<ffffffff803d844b>] iwl_eeprom_query16+0xb/0x20 > RSP: 0018:ffff88007b631a88 EFLAGS: 00010092 > RAX: 7fff88007dfd5400 RBX: ffff88007d81a000 RCX: 00000000800600f0 > RDX: 0000000000000cfc RSI: 0000000000000090 RDI: ffff88007dcc1940 > RBP: ffff88007b631a88 R08: 0000000000000002 R09: ffff88007b631a5c > R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000080006 > R13: ffff88007dcc1940 R14: ffff88007dcc29f8 R15: ffff88007d81a740 > FS: 00007f7f93ef16f0(0000) GS:ffff88007f0686c0(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > CR2: 00002ad88fdfd000 CR3: 000000007d935000 CR4: 00000000000006a0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Process ifplugd (pid: 3163, threadinfo ffff88007b630000, task ffff88007b5ba980) > Stack: > ffff88007b631af8 ffffffffa0108526 ffff88007b631af8 ffffffffa00f3aaf > 0000000000000000 ffff88007dcc2328 0000000000000292 0000000000000000 > 0143000000000000 ffff88007d81a000 ffff88007dcc1940 ffff88007dcc2328 > Call Trace: > [<ffffffffa0108526>] iwl4965_nic_config+0xa6/0x380 [iwlagn] > [<ffffffffa00f3aaf>] ? iwl4965_set_pwr_src+0x1cf/0x3d0 [iwlagn] > [<ffffffff803d5a9b>] iwl_hw_nic_init+0x11b/0x1d0 > [<ffffffffa00fbe17>] __iwl4965_up+0x1a7/0x720 [iwlagn] > [<ffffffffa00fd0c8>] iwl4965_mac_start+0xd38/0x1570 [iwlagn] > [<ffffffff8022d365>] ? __wake_up_sync+0x55/0x70 > [<ffffffff8043000f>] ? sock_def_readable+0x6f/0x80 > [<ffffffff8049b893>] ? unix_dgram_sendmsg+0x463/0x4f0 > [<ffffffff804b5cf8>] ieee80211_open+0x328/0x830 > [<ffffffff8042bf5b>] ? sock_sendmsg+0xdb/0xf0 > [<ffffffff8043cba4>] dev_open+0x64/0xc0 > [<ffffffff8043ba71>] dev_change_flags+0x91/0x1b0 > [<ffffffff8047fde3>] devinet_ioctl+0x5b3/0x750 > [<ffffffff8048096d>] inet_ioctl+0x6d/0x90 > [<ffffffff8042c4d5>] sock_ioctl+0xc5/0x240 > [<ffffffff802a60f1>] vfs_ioctl+0x31/0x90 > [<ffffffff802a647b>] do_vfs_ioctl+0x32b/0x460 > [<ffffffff802a65fa>] sys_ioctl+0x4a/0x80 > [<ffffffff8020c1fb>] system_call_fastpath+0x16/0x1b > Code: 48 8b 47 18 55 48 89 e5 48 8b 40 18 48 8b 00 ff 90 00 01 00 00 c9 c3 66 0f 1f 84 00 00 00 00 00 48 8b 87 98 22 01 00 55 48 89 e5 <0f> b6 54 06 01 0f b6 04 30 c9 c1 e2 08 09 d0 0f b7 c0 c3 66 90 > RIP [<ffffffff803d844b>] iwl_eeprom_query16+0xb/0x20 > RSP <ffff88007b631a88> > ---[ end trace 28eaede31d178563 ]--- > > ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: iwlagn driver segfault in 2.6.28-rc3 2008-11-16 23:54 ` Tomas Winkler @ 2008-11-17 0:39 ` Carlos R. Mafra 2008-11-19 20:45 ` Carlos R. Mafra 0 siblings, 1 reply; 11+ messages in thread From: Carlos R. Mafra @ 2008-11-17 0:39 UTC (permalink / raw) To: Tomas Winkler Cc: reinette chatre, Lukas Hejtmanek, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org, ipw3945-devel@lists.sourceforge.net On Mon 17.Nov'08 at 1:54:16 +0200, Tomas Winkler wrote: [...] > Can you please try this one (might be white space broken, just pasted in) Sure, I've already applied it by hand and will start testing it right away. But it will take many days until I can report back about it, because this oops happened only two times in one month or so. Thanks for taking a look at it, the last time you did my regression got fixed :-) > diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c > b/drivers/net/wireless/iwlwifi/iwl-sta.c > index 61797f3..d848c63 100644 > --- a/drivers/net/wireless/iwlwifi/iwl-sta.c > +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c > @@ -734,6 +734,12 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv, > return 0; > } > > + if (WARN(priv->stations[sta_id].sta.key.key_offset == > WEP_INVALID_OFFSET, > + "Removing wrong key %d 0x%x\n", keyconf->keyidx, key_flags)) { > + spin_unlock_irqrestore(&priv->sta_lock, flags); > + return 0; > + } > + > if (!test_and_clear_bit(priv->stations[sta_id].sta.key.key_offset, > &priv->ucode_key_table)) > IWL_ERROR("index %d not used in uCode key table.\n", > > Thanks > Tomas > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: iwlagn driver segfault in 2.6.28-rc3 2008-11-17 0:39 ` Carlos R. Mafra @ 2008-11-19 20:45 ` Carlos R. Mafra 2008-11-19 22:06 ` Tomas Winkler 0 siblings, 1 reply; 11+ messages in thread From: Carlos R. Mafra @ 2008-11-19 20:45 UTC (permalink / raw) To: Tomas Winkler Cc: reinette chatre, Lukas Hejtmanek, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org, ipw3945-devel@lists.sourceforge.net On Mon 17.Nov'08 at 1:39:41 +0100, Carlos R. Mafra wrote: > On Mon 17.Nov'08 at 1:54:16 +0200, Tomas Winkler wrote: > [...] > > Can you please try this one (might be white space broken, just pasted in) > > Sure, I've already applied it by hand and will start testing it right away. > > But it will take many days until I can report back about it, because > this oops happened only two times in one month or so. Ok, the WARN() in your patch from Sunday (quoted below) appeared in my logs. I've just noticed now (but it is the 3rd or 4th time already in dmesg, that is why it appears "Tainted") I don't if the situation leading to the WARN() in your patch is the same one which used to kill my wireless connection before (with the oops in iwl_eeprom_query16 that started this thread), but the fact is that my wifi is still working. Here is the log: [ I have the full dmesg from sunday up to now, with lots of s2ram cycles in the middle. I can send it if needed ] ------------[ cut here ]------------ WARNING: at drivers/net/wireless/iwlwifi/iwl-sta.c:738 iwl_remove_dynamic_key+0x212/0x220() Removing wrong key 1 0x410a Modules linked in: xt_comment xt_policy xt_tcpmss xt_pkttype xt_owner xt_NFQUEUE xt_NFLOG xt_multiport xt_MARK xt_mark xt_mac xt_limit xt_length xt_ipra nge xt_hashlimit xt_dscp xt_dccp xt_CLASSIFY snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss nvram uvcvideo snd_hda_inte l snd_pcm compat_ioctl32 ohci1394 i2c_i801 videodev snd_timer ieee1394 v4l1_compat iwlagn snd_page_alloc evdev sg sky2 snd_hwdep sr_mod ata_piix ahci li bata sd_mod scsi_mod uhci_hcd ohci_hcd ehci_hcd usbcore [last unloaded: scsi_wait_scan] Pid: 9, comm: events/0 Tainted: G W 2.6.28-rc5-tomas-iwlagn-00019-ge14c8bf-dirty #21 Call Trace: [<ffffffff80239947>] warn_slowpath+0xb7/0xe0 [<ffffffff80213420>] ? nommu_map_single+0x0/0x70 [<ffffffff80213420>] ? nommu_map_single+0x0/0x70 [<ffffffff803df221>] ? iwl_enqueue_hcmd+0x271/0x430 [<ffffffff803d9edf>] ? iwl_send_cmd+0xf/0x20 [<ffffffff803e1624>] ? iwl_send_add_sta+0x84/0x180 [<ffffffff803e2c42>] iwl_remove_dynamic_key+0x212/0x220 [<ffffffffa00ed2ba>] iwl4965_mac_set_key+0x27a/0x410 [iwlagn] [<ffffffff804be29d>] ieee80211_key_disable_hw_accel+0x9d/0xf0 [<ffffffff8030e94b>] ? crypto_free_tfm+0x5b/0x70 [<ffffffff804be470>] __ieee80211_key_todo+0x180/0x1f0 [<ffffffff804be640>] ? key_todo+0x0/0x10 [<ffffffff804be62e>] ieee80211_key_todo+0xe/0x20 [<ffffffff804be649>] key_todo+0x9/0x10 [<ffffffff8024afdb>] run_workqueue+0xbb/0x150 [<ffffffff8024bc63>] worker_thread+0xa3/0x110 [<ffffffff8024eff0>] ? autoremove_wake_function+0x0/0x40 [<ffffffff8024bbc0>] ? worker_thread+0x0/0x110 [<ffffffff8024eb1d>] kthread+0x4d/0x80 [<ffffffff8020d0e9>] child_rip+0xa/0x11 [<ffffffff8024ead0>] ? kthread+0x0/0x80 [<ffffffff8020d0df>] ? child_rip+0x0/0x11 ---[ end trace 504c57ff44d53cd9 ]--- > > diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c > > b/drivers/net/wireless/iwlwifi/iwl-sta.c > > index 61797f3..d848c63 100644 > > --- a/drivers/net/wireless/iwlwifi/iwl-sta.c > > +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c > > @@ -734,6 +734,12 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv, > > return 0; > > } > > > > + if (WARN(priv->stations[sta_id].sta.key.key_offset == > > WEP_INVALID_OFFSET, > > + "Removing wrong key %d 0x%x\n", keyconf->keyidx, key_flags)) { > > + spin_unlock_irqrestore(&priv->sta_lock, flags); > > + return 0; > > + } > > + > > if (!test_and_clear_bit(priv->stations[sta_id].sta.key.key_offset, > > &priv->ucode_key_table)) > > IWL_ERROR("index %d not used in uCode key table.\n", > > > > Thanks > > Tomas > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: iwlagn driver segfault in 2.6.28-rc3 2008-11-19 20:45 ` Carlos R. Mafra @ 2008-11-19 22:06 ` Tomas Winkler 2008-11-19 22:29 ` Carlos R. Mafra 0 siblings, 1 reply; 11+ messages in thread From: Tomas Winkler @ 2008-11-19 22:06 UTC (permalink / raw) To: Carlos R. Mafra Cc: reinette chatre, Lukas Hejtmanek, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org, ipw3945-devel@lists.sourceforge.net On Wed, Nov 19, 2008 at 10:45 PM, Carlos R. Mafra <crmafra2@gmail.com> wrote: > On Mon 17.Nov'08 at 1:39:41 +0100, Carlos R. Mafra wrote: >> On Mon 17.Nov'08 at 1:54:16 +0200, Tomas Winkler wrote: >> [...] >> > Can you please try this one (might be white space broken, just pasted in) >> >> Sure, I've already applied it by hand and will start testing it right away. >> >> But it will take many days until I can report back about it, because >> this oops happened only two times in one month or so. > > Ok, the WARN() in your patch from Sunday (quoted below) appeared in my logs. > I've just noticed now (but it is the 3rd or 4th time already in dmesg, that > is why it appears "Tainted") > > I don't if the situation leading to the WARN() in your patch is the same > one which used to kill my wireless connection before (with the oops > in iwl_eeprom_query16 that started this thread), but the fact is > that my wifi is still working. The second removal of invalid key corrupt the eeprom pointer in this line if (!test_and_clear_bit(priv->stations[sta_id].sta.key.key_offset, &priv->ucode_key_table)) as discovered by Yi so this patch also fix the immediate failure We are just not sure in what flow the key is removed second time and maybe there is an other issue behind it. The full log will be appreciated but you've already helped a lot Thanks for your time Tomas > Here is the log: > > [ I have the full dmesg from sunday up to now, with > lots of s2ram cycles in the middle. I can send it if needed ] > Thanks a lot this is a great help. > ------------[ cut here ]------------ > WARNING: at drivers/net/wireless/iwlwifi/iwl-sta.c:738 iwl_remove_dynamic_key+0x212/0x220() > Removing wrong key 1 0x410a > Modules linked in: xt_comment xt_policy xt_tcpmss xt_pkttype xt_owner xt_NFQUEUE xt_NFLOG xt_multiport xt_MARK xt_mark xt_mac xt_limit xt_length xt_ipra nge xt_hashlimit xt_dscp xt_dccp xt_CLASSIFY snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss nvram uvcvideo snd_hda_inte l snd_pcm compat_ioctl32 ohci1394 i2c_i801 videodev snd_timer ieee1394 v4l1_compat iwlagn snd_page_alloc evdev sg sky2 snd_hwdep sr_mod ata_piix ahci li bata sd_mod scsi_mod uhci_hcd ohci_hcd ehci_hcd usbcore [last unloaded: scsi_wait_scan] > Pid: 9, comm: events/0 Tainted: G W 2.6.28-rc5-tomas-iwlagn-00019-ge14c8bf-dirty #21 > Call Trace: > [<ffffffff80239947>] warn_slowpath+0xb7/0xe0 > [<ffffffff80213420>] ? nommu_map_single+0x0/0x70 > [<ffffffff80213420>] ? nommu_map_single+0x0/0x70 > [<ffffffff803df221>] ? iwl_enqueue_hcmd+0x271/0x430 > [<ffffffff803d9edf>] ? iwl_send_cmd+0xf/0x20 > [<ffffffff803e1624>] ? iwl_send_add_sta+0x84/0x180 > [<ffffffff803e2c42>] iwl_remove_dynamic_key+0x212/0x220 > [<ffffffffa00ed2ba>] iwl4965_mac_set_key+0x27a/0x410 [iwlagn] > [<ffffffff804be29d>] ieee80211_key_disable_hw_accel+0x9d/0xf0 > [<ffffffff8030e94b>] ? crypto_free_tfm+0x5b/0x70 > [<ffffffff804be470>] __ieee80211_key_todo+0x180/0x1f0 > [<ffffffff804be640>] ? key_todo+0x0/0x10 > [<ffffffff804be62e>] ieee80211_key_todo+0xe/0x20 > [<ffffffff804be649>] key_todo+0x9/0x10 > [<ffffffff8024afdb>] run_workqueue+0xbb/0x150 > [<ffffffff8024bc63>] worker_thread+0xa3/0x110 > [<ffffffff8024eff0>] ? autoremove_wake_function+0x0/0x40 > [<ffffffff8024bbc0>] ? worker_thread+0x0/0x110 > [<ffffffff8024eb1d>] kthread+0x4d/0x80 > [<ffffffff8020d0e9>] child_rip+0xa/0x11 > [<ffffffff8024ead0>] ? kthread+0x0/0x80 > [<ffffffff8020d0df>] ? child_rip+0x0/0x11 > ---[ end trace 504c57ff44d53cd9 ]--- > > > > >> > diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c >> > b/drivers/net/wireless/iwlwifi/iwl-sta.c >> > index 61797f3..d848c63 100644 >> > --- a/drivers/net/wireless/iwlwifi/iwl-sta.c >> > +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c >> > @@ -734,6 +734,12 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv, >> > return 0; >> > } >> > >> > + if (WARN(priv->stations[sta_id].sta.key.key_offset == >> > WEP_INVALID_OFFSET, >> > + "Removing wrong key %d 0x%x\n", keyconf->keyidx, key_flags)) { >> > + spin_unlock_irqrestore(&priv->sta_lock, flags); >> > + return 0; >> > + } >> > + >> > if (!test_and_clear_bit(priv->stations[sta_id].sta.key.key_offset, >> > &priv->ucode_key_table)) >> > IWL_ERROR("index %d not used in uCode key table.\n", >> > >> > Thanks >> > Tomas >> > > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: iwlagn driver segfault in 2.6.28-rc3 2008-11-19 22:06 ` Tomas Winkler @ 2008-11-19 22:29 ` Carlos R. Mafra 0 siblings, 0 replies; 11+ messages in thread From: Carlos R. Mafra @ 2008-11-19 22:29 UTC (permalink / raw) To: Tomas Winkler Cc: reinette chatre, Lukas Hejtmanek, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org, ipw3945-devel@lists.sourceforge.net On Thu 20.Nov'08 at 0:06:05 +0200, Tomas Winkler wrote: > > > > I don't if the situation leading to the WARN() in your patch is the same > > one which used to kill my wireless connection before (with the oops > > in iwl_eeprom_query16 that started this thread), but the fact is > > that my wifi is still working. > > The second removal of invalid key corrupt the eeprom pointer > in this line > > if (!test_and_clear_bit(priv->stations[sta_id].sta.key.key_offset, > &priv->ucode_key_table)) > > as discovered by Yi so this patch also fix the immediate failure > We are just not sure in what flow the key is removed second time and maybe > there is an other issue behind it. Ok, thanks for the explanation! > The full log will be appreciated but you've already helped a lot > Thanks for your time I thank you too for taking care of it, and now at least my wifi does not die as before. I uploaded the dmesg here http://www.aei.mpg.de/~crmafra/dmesg-iwlwifi.txt it contains the warnings including the first (not tainted), but the beginning of the log is missing because it was too big I guess. But the boot messages are probably the same as the other dmesg I've sent already in this thread. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: iwlagn driver segfault in 2.6.28-rc3 2008-11-16 12:06 ` Carlos R. Mafra 2008-11-16 12:29 ` Tomas Winkler @ 2008-11-16 17:47 ` reinette chatre 1 sibling, 0 replies; 11+ messages in thread From: reinette chatre @ 2008-11-16 17:47 UTC (permalink / raw) To: Carlos R. Mafra Cc: Lukas Hejtmanek, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org, ipw3945-devel@lists.sourceforge.net On Sun, 2008-11-16 at 04:06 -0800, Carlos R. Mafra wrote: > > From now on I will apply Reinette's patch and wait for it to > happen again (but it seldom happens). Sorry but that patch does not address this problem which turned out to be memory corruption, not uninitialized memory. Another patch is being worked on. Reinette ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2008-11-19 22:29 UTC | newest] Thread overview: 11+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2008-11-11 14:34 iwlagn driver segfault in 2.6.28-rc3 Lukas Hejtmanek 2008-11-13 7:07 ` reinette chatre 2008-11-16 12:06 ` Carlos R. Mafra 2008-11-16 12:29 ` Tomas Winkler 2008-11-16 12:51 ` Carlos R. Mafra 2008-11-16 23:54 ` Tomas Winkler 2008-11-17 0:39 ` Carlos R. Mafra 2008-11-19 20:45 ` Carlos R. Mafra 2008-11-19 22:06 ` Tomas Winkler 2008-11-19 22:29 ` Carlos R. Mafra 2008-11-16 17:47 ` reinette chatre
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).