From: Yuval Hager <yuval@avramzon.net>
To: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Michael Buesch <mb@bu3sch.de>,
LKML <linux-kernel@vger.kernel.org>,
wireless <linux-wireless@vger.kernel.org>,
bcm43xx-dev@lists.berlios.de
Subject: Re: BCM4312 Fails when xdm is started
Date: Mon, 24 Nov 2008 10:49:38 +0200 [thread overview]
Message-ID: <200811241049.45734.yuval@avramzon.net> (raw)
In-Reply-To: <4929C68E.6080401@lwfinger.net>
[-- Attachment #1: Type: text/plain, Size: 3172 bytes --]
On Sunday 23 November 2008, Larry Finger wrote:
> From a config file posted earlier, the OP is using SLAB. Is there any point
> in trying SLUB?
Another try, not sure what it means:
* Added CONFIG_SLUB and CONFIG_SLUB_DEBUG
* boot parameters: root=/dev/sda3 debug memory_corruption_check=1 devres.log=1 debug_objects debugpat
acpi.debug_layer=0x00410002 acpi.debug_level=0xffffffff acpi=off apic=debug nolapic irqpoll pci=noacpi slub_debug=FZPU
* cat /proc/interrupts is
CPU0
0: 16658 XT-PIC-XT timer
1: 289 XT-PIC-XT i8042
2: 0 XT-PIC-XT cascade
3: 60 XT-PIC-XT uhci_hcd:usb2, ehci_hcd:usb4
5: 9163 XT-PIC-XT sata_via, HDA Intel
7: 0 XT-PIC-XT uhci_hcd:usb3
8: 2 XT-PIC-XT rtc
10: 1712 XT-PIC-XT b43
11: 131 XT-PIC-XT uhci_hcd:usb1
12: 706 XT-PIC-XT i8042
14: 0 XT-PIC-XT ide0
15: 0 XT-PIC-XT ide1
NMI: 0 Non-maskable interrupts
LOC: 0 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0
* lspci -d 14e4:4312 -x
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 02)
00: e4 14 12 43 06 01 10 00 02 00 80 02 08 00 00 00
10: 04 c0 ff fd 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 71 13
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00
* xset dpms force standby
* wake up
* dmesg is virtually the same as before, complaining about nobody handling irq 10 and disabling it.
* /proc/interrupts now is
0: 80987 XT-PIC-XT timer
1: 1027 XT-PIC-XT i8042
2: 0 XT-PIC-XT cascade
3: 60 XT-PIC-XT uhci_hcd:usb2, ehci_hcd:usb4
5: 10400 XT-PIC-XT sata_via, HDA Intel
7: 0 XT-PIC-XT uhci_hcd:usb3
8: 2 XT-PIC-XT rtc
10: 200000 XT-PIC-XT b43
11: 131 XT-PIC-XT uhci_hcd:usb1
12: 3059 XT-PIC-XT i8042
14: 0 XT-PIC-XT ide0
15: 0 XT-PIC-XT ide1
NMI: 0 Non-maskable interrupts
LOC: 0 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0
* Now check this out - the output of lspci -d 14e4:4312 -x
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev ff)
00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
(I double checked this)
huh?
--yuval
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
next prev parent reply other threads:[~2008-11-24 8:52 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200811151801.02369.yuval@avramzon.net>
[not found] ` <491EFB9D.3040002@lwfinger.net>
[not found] ` <200811151907.05636.yuval@avramzon.net>
[not found] ` <20081115174623.27321.qmail@stuge.se>
2008-11-21 16:25 ` BCM4312 Fails when xdm is started Larry Finger
2008-11-21 17:42 ` Michael Buesch
2008-11-21 18:28 ` Larry Finger
2008-11-22 6:39 ` Yuval Hager
2008-11-22 15:13 ` Michael Buesch
2008-11-22 15:32 ` Larry Finger
2008-11-22 15:54 ` Michael Buesch
2008-11-23 7:26 ` Yuval Hager
2008-11-23 11:49 ` Yuval Hager
2008-11-23 12:20 ` Michael Buesch
2008-11-23 15:42 ` Larry Finger
2008-11-23 17:42 ` Michael Buesch
[not found] ` <200811231955.41722.yuval@avramzon.net>
2008-11-23 18:08 ` Michael Buesch
2008-11-23 20:46 ` Peter Stuge
2008-11-23 21:09 ` Larry Finger
2008-11-24 8:49 ` Yuval Hager [this message]
2008-11-24 10:55 ` Michael Buesch
2008-11-24 16:11 ` Larry Finger
2008-11-25 5:43 ` Yuval Hager
2008-11-25 7:18 ` Peter Stuge
2008-12-07 9:29 ` Yuval Hager
2008-12-07 16:15 ` Larry Finger
2008-11-25 11:05 ` Michael Buesch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200811241049.45734.yuval@avramzon.net \
--to=yuval@avramzon.net \
--cc=Larry.Finger@lwfinger.net \
--cc=bcm43xx-dev@lists.berlios.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=mb@bu3sch.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).