From: Christian Lamparter <chunkeey@web.de>
To: linux-wireless@vger.kernel.org
Cc: Johannes Berg <johannes@sipsolutions.net>,
John W Linville <linville@tuxdriver.com>,
Stefan Steuerwald <salsasepp@googlemail.com>
Subject: [PATCH 3/3] p54: revamp station power save management in access point mode
Date: Fri, 28 Nov 2008 23:46:12 +0100 [thread overview]
Message-ID: <200811282346.12464.chunkeey@web.de> (raw)
This patch addresses the problem in:
http://marc.info/?l=linux-wireless&m=122727674810057&w=2
Thanks to Stefan Steuerwald <salsasepp@googlemail.com>
extensive iPod touch tests. We could finally squash some bugs in
p54's master mode / access point implementation.
Let's hope we got everything right this time and all stations
from now on will wake up on TIM and receive their queued frames
and go to sleep again without any hiccups.
Signed-off-by: Christian Lamparter <chunkeey@web.de>
---
diff -Nurp a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
--- a/drivers/net/wireless/p54/p54common.c 2008-11-28 20:18:53.000000000 +0100
+++ b/drivers/net/wireless/p54/p54common.c 2008-11-28 21:37:45.000000000 +0100
@@ -653,6 +653,10 @@ static void p54_rx_frame_sent(struct iee
__skb_unlink(entry, &priv->tx_queue);
spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
+ entry_hdr = (struct p54_hdr *) entry->data;
+ entry_data = (struct p54_tx_data *) entry_hdr->data;
+ priv->tx_stats[entry_data->hw_queue].len--;
+
if (unlikely(entry == priv->cached_beacon)) {
kfree_skb(entry);
priv->cached_beacon = NULL;
@@ -669,8 +673,6 @@ static void p54_rx_frame_sent(struct iee
BUILD_BUG_ON(offsetof(struct ieee80211_tx_info,
status.ampdu_ack_len) != 23);
- entry_hdr = (struct p54_hdr *) entry->data;
- entry_data = (struct p54_tx_data *) entry_hdr->data;
if (entry_hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_ALIGN))
pad = entry_data->align[0];
@@ -688,7 +690,6 @@ static void p54_rx_frame_sent(struct iee
}
}
- priv->tx_stats[entry_data->hw_queue].len--;
if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
(!payload->status))
info->flags |= IEEE80211_TX_STAT_ACK;
@@ -1005,6 +1006,26 @@ static int p54_sta_unlock(struct ieee802
return 0;
}
+static void p54_sta_notify(struct ieee80211_hw *dev, struct ieee80211_vif *vif,
+ enum sta_notify_cmd notify_cmd,
+ struct ieee80211_sta *sta)
+{
+ switch (notify_cmd) {
+ case STA_NOTIFY_ADD:
+ case STA_NOTIFY_REMOVE:
+ case STA_NOTIFY_AWAKE:
+ /*
+ * Notify the firmware that we don't want or we don't
+ * need to buffer frames for this station anymore.
+ */
+
+ p54_sta_unlock(dev, sta->addr);
+ break;
+ default:
+ break;
+ }
+}
+
static int p54_tx_cancel(struct ieee80211_hw *dev, struct sk_buff *entry)
{
struct p54_common *priv = dev->priv;
@@ -1070,7 +1091,7 @@ static int p54_tx_fill(struct ieee80211_
if (info->control.sta)
*aid = info->control.sta->aid;
else
- *flags = P54_HDR_FLAG_DATA_OUT_NOCANCEL;
+ *flags |= P54_HDR_FLAG_DATA_OUT_NOCANCEL;
}
return ret;
}
@@ -1083,7 +1104,7 @@ static int p54_tx(struct ieee80211_hw *d
struct p54_hdr *hdr;
struct p54_tx_data *txhdr;
size_t padding, len, tim_len = 0;
- int i, j, ridx;
+ int i, j, ridx, ret;
u16 hdr_flags = 0, aid = 0;
u8 rate, queue;
u8 cts_rate = 0x20;
@@ -1093,30 +1114,18 @@ static int p54_tx(struct ieee80211_hw *d
queue = skb_get_queue_mapping(skb);
- if (p54_tx_fill(dev, skb, info, &queue, &tim_len, &hdr_flags, &aid)) {
- current_queue = &priv->tx_stats[queue];
- if (unlikely(current_queue->len > current_queue->limit))
- return NETDEV_TX_BUSY;
- current_queue->len++;
- current_queue->count++;
- if (current_queue->len == current_queue->limit)
- ieee80211_stop_queue(dev, skb_get_queue_mapping(skb));
- }
+ ret = p54_tx_fill(dev, skb, info, &queue, &tim_len, &hdr_flags, &aid);
+ current_queue = &priv->tx_stats[queue];
+ if (unlikely((current_queue->len > current_queue->limit) && ret))
+ return NETDEV_TX_BUSY;
+ current_queue->len++;
+ current_queue->count++;
+ if ((current_queue->len == current_queue->limit) && ret)
+ ieee80211_stop_queue(dev, skb_get_queue_mapping(skb));
padding = (unsigned long)(skb->data - (sizeof(*hdr) + sizeof(*txhdr))) & 3;
len = skb->len;
- if (info->flags & IEEE80211_TX_CTL_CLEAR_PS_FILT) {
- if (info->control.sta)
- if (p54_sta_unlock(dev, info->control.sta->addr)) {
- if (current_queue) {
- current_queue->len--;
- current_queue->count--;
- }
- return NETDEV_TX_BUSY;
- }
- }
-
txhdr = (struct p54_tx_data *) skb_push(skb, sizeof(*txhdr) + padding);
hdr = (struct p54_hdr *) skb_push(skb, sizeof(*hdr));
@@ -1835,6 +1844,7 @@ static const struct ieee80211_ops p54_op
.add_interface = p54_add_interface,
.remove_interface = p54_remove_interface,
.set_tim = p54_set_tim,
+ .sta_notify = p54_sta_notify,
.config = p54_config,
.config_interface = p54_config_interface,
.bss_info_changed = p54_bss_info_changed,
diff -Nurp a/drivers/net/wireless/p54/p54common.h b/drivers/net/wireless/p54/p54common.h
--- a/drivers/net/wireless/p54/p54common.h 2008-11-28 20:18:53.000000000 +0100
+++ b/drivers/net/wireless/p54/p54common.h 2008-11-28 20:27:59.000000000 +0100
@@ -302,7 +302,7 @@ enum p54_frame_sent_status {
P54_TX_OK = 0,
P54_TX_FAILED,
P54_TX_PSM,
- P54_TX_PSM_CANCELLED
+ P54_TX_PSM_CANCELLED = 4
};
struct p54_frame_sent {
reply other threads:[~2008-11-28 22:46 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200811282346.12464.chunkeey@web.de \
--to=chunkeey@web.de \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=salsasepp@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).