From: Henning Rogge <hrogge@googlemail.com>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: "Luis R. Rodriguez" <lrodriguez@atheros.com>,
Henning Rogge <rogge@fgan.de>,
Luis Rodriguez <Luis.Rodriguez@atheros.com>,
Marcel Holtmann <holtmann@linux.intel.com>,
"linux-wireless" <linux-wireless@vger.kernel.org>,
"nbd@openwrt.org" <nbd@openwrt.org>
Subject: [PATCH 1/2] Add signal strength and bandwith to nl80211station info
Date: Sun, 7 Dec 2008 19:17:00 +0100 [thread overview]
Message-ID: <200812071917.07075.hrogge@googlemail.com> (raw)
In-Reply-To: <1228671578.22164.48.camel@johannes.berg>
[-- Attachment #1.1: Type: text/plain, Size: 7395 bytes --]
This patch adds information about signal strength and unicast transmission
bitrate to the nl80211 station info.
----------------------
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 04d4516..56450b4 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -425,6 +425,30 @@ enum nl80211_sta_flags {
};
/**
+ * enum nl80211_rate_info - bitrate information
+ *
+ * These attribute types are used with %NL80211_STA_INFO_TXRATE
+ * when getting information about the bitrate of a station.
+ *
+ * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_RATE_INFO_LEGACY: bitrate for 802.11abg (u16, 100kbit/s)
+ * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
+ * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
+ * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
+ */
+enum nl80211_rate_info {
+ __NL80211_RATE_INFO_INVALID,
+ NL80211_RATE_INFO_LEGACY,
+ NL80211_RATE_INFO_MCS,
+ NL80211_RATE_INFO_40_MHZ_WIDTH,
+ NL80211_RATE_INFO_SHORT_GI,
+
+ /* keep last */
+ __NL80211_RATE_INFO_AFTER_LAST,
+ NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1
+};
+
+/**
* enum nl80211_sta_info - station information
*
* These attribute types are used with %NL80211_ATTR_STA_INFO
@@ -436,6 +460,9 @@ enum nl80211_sta_flags {
* @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
* @__NL80211_STA_INFO_AFTER_LAST: internal
* @NL80211_STA_INFO_MAX: highest possible station info attribute
+ * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
+ * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
+ * containing info as possible, see &enum nl80211_sta_info_txrate.
*/
enum nl80211_sta_info {
__NL80211_STA_INFO_INVALID,
@@ -445,6 +472,8 @@ enum nl80211_sta_info {
NL80211_STA_INFO_LLID,
NL80211_STA_INFO_PLID,
NL80211_STA_INFO_PLINK_STATE,
+ NL80211_STA_INFO_SIGNAL,
+ NL80211_STA_INFO_TX_BITRATE,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index a0c0bf1..d9ce51e 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -169,6 +169,9 @@ struct station_parameters {
* @STATION_INFO_LLID: @llid filled
* @STATION_INFO_PLID: @plid filled
* @STATION_INFO_PLINK_STATE: @plink_state filled
+ * @STATION_INFO_SIGNAL: @signal filled
+ * @STATION_INFO_TX_BITRATE: @tx_bitrate fields are filled
+ * (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs)
*/
enum station_info_flags {
STATION_INFO_INACTIVE_TIME = 1<<0,
@@ -177,6 +180,39 @@ enum station_info_flags {
STATION_INFO_LLID = 1<<3,
STATION_INFO_PLID = 1<<4,
STATION_INFO_PLINK_STATE = 1<<5,
+ STATION_INFO_SIGNAL = 1<<6,
+ STATION_INFO_TX_BITRATE = 1<<7,
+};
+
+/**
+ * enum station_info_rate_flags - bitrate info flags
+ *
+ * Used by the driver to indicate the specific rate transmission
+ * type for 802.11n transmissions.
+ *
+ * @RATE_INFO_FLAGS_MCS: @tx_bitrate_mcs filled
+ * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 Mhz width transmission
+ * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval
+ */
+enum rate_info_flags {
+ RATE_INFO_FLAGS_MCS = 1<<0,
+ RATE_INFO_FLAGS_40_MHZ_WIDTH = 1<<1,
+ RATE_INFO_FLAGS_SHORT_GI = 1<<2,
+};
+
+/**
+ * struct rate_info - bitrate information
+ *
+ * Information about a receiving or transmitting bitrate
+ *
+ * @flags: bitflag of flags from &enum rate_info_flags
+ * @mcs: mcs index if struct describes a 802.11n bitrate
+ * @legacy: bitrate in 100kbit/s for 802.11abg
+ */
+struct rate_info {
+ u8 flags;
+ u8 mcs;
+ u16 legacy;
};
/**
@@ -191,6 +227,8 @@ enum station_info_flags {
* @llid: mesh local link id
* @plid: mesh peer link id
* @plink_state: mesh peer link state
+ * @signal: signal strength of last received package in dBm
+ * @txrate: current unicast bitrate to this station
*/
struct station_info {
u32 filled;
@@ -200,6 +238,8 @@ struct station_info {
u16 llid;
u16 plid;
u8 plink_state;
+ u8 signal;
+ struct rate_info txrate;
};
/**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 7a7a6c1..e6c2b7a 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -310,12 +310,35 @@ static void sta_set_sinfo(struct sta_info *sta, struct
station_info *sinfo)
sinfo->filled = STATION_INFO_INACTIVE_TIME |
STATION_INFO_RX_BYTES |
- STATION_INFO_TX_BYTES;
+ STATION_INFO_TX_BYTES |
+ STATION_INFO_TX_BITRATE;
sinfo->inactive_time = jiffies_to_msecs(jiffies - sta->last_rx);
sinfo->rx_bytes = sta->rx_bytes;
sinfo->tx_bytes = sta->tx_bytes;
+ if (sta->local->hw.flags & IEEE80211_HW_SIGNAL_DBM) {
+ sinfo->filled |= STATION_INFO_SIGNAL;
+ sinfo->signal = sta->last_signal;
+ }
+
+ sinfo->txrate.flags = 0;
+ if (sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS)
+ sinfo->txrate.flags |= RATE_INFO_FLAGS_MCS;
+ if (sta->last_tx_rate.flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
+ sinfo->txrate.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
+ if (sta->last_tx_rate.flags & IEEE80211_TX_RC_SHORT_GI)
+ sinfo->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
+
+ if (!(sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS)) {
+ struct ieee80211_supported_band *sband;
+ sband = sta->local->hw.wiphy->bands[sta->local->hw.conf.channel->band];
+ sinfo->txrate.legacy = sband->bitrates[sta->last_tx_rate.idx].bitrate;
+ }
+ else {
+ sinfo->txrate.mcs = sta->last_tx_rate.idx;
+ }
+
if (ieee80211_vif_is_mesh(&sdata->vif)) {
#ifdef CONFIG_MAC80211_MESH
sinfo->filled |= STATION_INFO_LLID |
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 9caee60..c9268b2 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -14,6 +14,7 @@
#include <linux/nl80211.h>
#include <linux/rtnetlink.h>
#include <linux/netlink.h>
+#include <net/mac80211.h>
#include <net/genetlink.h>
#include <net/cfg80211.h>
#include "core.h"
@@ -1084,7 +1085,7 @@ static int nl80211_send_station(struct sk_buff *msg, u32
pid, u32 seq,
u8 *mac_addr, struct station_info *sinfo)
{
void *hdr;
- struct nlattr *sinfoattr;
+ struct nlattr *sinfoattr, *txrate;
hdr = nl80211hdr_put(msg, pid, seq, flags, NL80211_CMD_NEW_STATION);
if (!hdr)
@@ -1114,7 +1115,28 @@ static int nl80211_send_station(struct sk_buff *msg,
u32 pid, u32 seq,
if (sinfo->filled & STATION_INFO_PLINK_STATE)
NLA_PUT_U8(msg, NL80211_STA_INFO_PLINK_STATE,
sinfo->plink_state);
+ if (sinfo->filled & STATION_INFO_SIGNAL)
+ NLA_PUT_U8(msg, NL80211_STA_INFO_SIGNAL,
+ sinfo->signal);
+ if (sinfo->filled & STATION_INFO_TX_BITRATE) {
+ txrate = nla_nest_start(msg, NL80211_STA_INFO_TX_BITRATE);
+ if (!txrate)
+ goto nla_put_failure;
+
+ if (!(sinfo->txrate.flags & RATE_INFO_FLAGS_MCS))
+ NLA_PUT_U16(msg, NL80211_RATE_INFO_LEGACY,
+ sinfo->txrate.legacy);
+ else
+ NLA_PUT_U8(msg, NL80211_RATE_INFO_MCS,
+ sinfo->txrate.mcs);
+ if (sinfo->txrate.flags & RATE_INFO_FLAGS_40_MHZ_WIDTH)
+ NLA_PUT_FLAG(msg, NL80211_RATE_INFO_40_MHZ_WIDTH);
+ if (sinfo->txrate.flags & RATE_INFO_FLAGS_SHORT_GI)
+ NLA_PUT_FLAG(msg, NL80211_RATE_INFO_SHORT_GI);
+
+ nla_nest_end(msg, txrate);
+ }
nla_nest_end(msg, sinfoattr);
return genlmsg_end(msg, hdr);
[-- Attachment #1.2: nl80211ext_v8_1.patch --]
[-- Type: text/x-patch, Size: 7246 bytes --]
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 04d4516..56450b4 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -425,6 +425,30 @@ enum nl80211_sta_flags {
};
/**
+ * enum nl80211_rate_info - bitrate information
+ *
+ * These attribute types are used with %NL80211_STA_INFO_TXRATE
+ * when getting information about the bitrate of a station.
+ *
+ * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_RATE_INFO_LEGACY: bitrate for 802.11abg (u16, 100kbit/s)
+ * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
+ * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
+ * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
+ */
+enum nl80211_rate_info {
+ __NL80211_RATE_INFO_INVALID,
+ NL80211_RATE_INFO_LEGACY,
+ NL80211_RATE_INFO_MCS,
+ NL80211_RATE_INFO_40_MHZ_WIDTH,
+ NL80211_RATE_INFO_SHORT_GI,
+
+ /* keep last */
+ __NL80211_RATE_INFO_AFTER_LAST,
+ NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1
+};
+
+/**
* enum nl80211_sta_info - station information
*
* These attribute types are used with %NL80211_ATTR_STA_INFO
@@ -436,6 +460,9 @@ enum nl80211_sta_flags {
* @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
* @__NL80211_STA_INFO_AFTER_LAST: internal
* @NL80211_STA_INFO_MAX: highest possible station info attribute
+ * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
+ * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
+ * containing info as possible, see &enum nl80211_sta_info_txrate.
*/
enum nl80211_sta_info {
__NL80211_STA_INFO_INVALID,
@@ -445,6 +472,8 @@ enum nl80211_sta_info {
NL80211_STA_INFO_LLID,
NL80211_STA_INFO_PLID,
NL80211_STA_INFO_PLINK_STATE,
+ NL80211_STA_INFO_SIGNAL,
+ NL80211_STA_INFO_TX_BITRATE,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index a0c0bf1..d9ce51e 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -169,6 +169,9 @@ struct station_parameters {
* @STATION_INFO_LLID: @llid filled
* @STATION_INFO_PLID: @plid filled
* @STATION_INFO_PLINK_STATE: @plink_state filled
+ * @STATION_INFO_SIGNAL: @signal filled
+ * @STATION_INFO_TX_BITRATE: @tx_bitrate fields are filled
+ * (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs)
*/
enum station_info_flags {
STATION_INFO_INACTIVE_TIME = 1<<0,
@@ -177,6 +180,39 @@ enum station_info_flags {
STATION_INFO_LLID = 1<<3,
STATION_INFO_PLID = 1<<4,
STATION_INFO_PLINK_STATE = 1<<5,
+ STATION_INFO_SIGNAL = 1<<6,
+ STATION_INFO_TX_BITRATE = 1<<7,
+};
+
+/**
+ * enum station_info_rate_flags - bitrate info flags
+ *
+ * Used by the driver to indicate the specific rate transmission
+ * type for 802.11n transmissions.
+ *
+ * @RATE_INFO_FLAGS_MCS: @tx_bitrate_mcs filled
+ * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 Mhz width transmission
+ * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval
+ */
+enum rate_info_flags {
+ RATE_INFO_FLAGS_MCS = 1<<0,
+ RATE_INFO_FLAGS_40_MHZ_WIDTH = 1<<1,
+ RATE_INFO_FLAGS_SHORT_GI = 1<<2,
+};
+
+/**
+ * struct rate_info - bitrate information
+ *
+ * Information about a receiving or transmitting bitrate
+ *
+ * @flags: bitflag of flags from &enum rate_info_flags
+ * @mcs: mcs index if struct describes a 802.11n bitrate
+ * @legacy: bitrate in 100kbit/s for 802.11abg
+ */
+struct rate_info {
+ u8 flags;
+ u8 mcs;
+ u16 legacy;
};
/**
@@ -191,6 +227,8 @@ enum station_info_flags {
* @llid: mesh local link id
* @plid: mesh peer link id
* @plink_state: mesh peer link state
+ * @signal: signal strength of last received package in dBm
+ * @txrate: current unicast bitrate to this station
*/
struct station_info {
u32 filled;
@@ -200,6 +238,8 @@ struct station_info {
u16 llid;
u16 plid;
u8 plink_state;
+ u8 signal;
+ struct rate_info txrate;
};
/**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 7a7a6c1..e6c2b7a 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -310,12 +310,35 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
sinfo->filled = STATION_INFO_INACTIVE_TIME |
STATION_INFO_RX_BYTES |
- STATION_INFO_TX_BYTES;
+ STATION_INFO_TX_BYTES |
+ STATION_INFO_TX_BITRATE;
sinfo->inactive_time = jiffies_to_msecs(jiffies - sta->last_rx);
sinfo->rx_bytes = sta->rx_bytes;
sinfo->tx_bytes = sta->tx_bytes;
+ if (sta->local->hw.flags & IEEE80211_HW_SIGNAL_DBM) {
+ sinfo->filled |= STATION_INFO_SIGNAL;
+ sinfo->signal = sta->last_signal;
+ }
+
+ sinfo->txrate.flags = 0;
+ if (sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS)
+ sinfo->txrate.flags |= RATE_INFO_FLAGS_MCS;
+ if (sta->last_tx_rate.flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
+ sinfo->txrate.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
+ if (sta->last_tx_rate.flags & IEEE80211_TX_RC_SHORT_GI)
+ sinfo->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
+
+ if (!(sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS)) {
+ struct ieee80211_supported_band *sband;
+ sband = sta->local->hw.wiphy->bands[sta->local->hw.conf.channel->band];
+ sinfo->txrate.legacy = sband->bitrates[sta->last_tx_rate.idx].bitrate;
+ }
+ else {
+ sinfo->txrate.mcs = sta->last_tx_rate.idx;
+ }
+
if (ieee80211_vif_is_mesh(&sdata->vif)) {
#ifdef CONFIG_MAC80211_MESH
sinfo->filled |= STATION_INFO_LLID |
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 9caee60..c9268b2 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -14,6 +14,7 @@
#include <linux/nl80211.h>
#include <linux/rtnetlink.h>
#include <linux/netlink.h>
+#include <net/mac80211.h>
#include <net/genetlink.h>
#include <net/cfg80211.h>
#include "core.h"
@@ -1084,7 +1085,7 @@ static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq,
u8 *mac_addr, struct station_info *sinfo)
{
void *hdr;
- struct nlattr *sinfoattr;
+ struct nlattr *sinfoattr, *txrate;
hdr = nl80211hdr_put(msg, pid, seq, flags, NL80211_CMD_NEW_STATION);
if (!hdr)
@@ -1114,7 +1115,28 @@ static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq,
if (sinfo->filled & STATION_INFO_PLINK_STATE)
NLA_PUT_U8(msg, NL80211_STA_INFO_PLINK_STATE,
sinfo->plink_state);
+ if (sinfo->filled & STATION_INFO_SIGNAL)
+ NLA_PUT_U8(msg, NL80211_STA_INFO_SIGNAL,
+ sinfo->signal);
+ if (sinfo->filled & STATION_INFO_TX_BITRATE) {
+ txrate = nla_nest_start(msg, NL80211_STA_INFO_TX_BITRATE);
+ if (!txrate)
+ goto nla_put_failure;
+
+ if (!(sinfo->txrate.flags & RATE_INFO_FLAGS_MCS))
+ NLA_PUT_U16(msg, NL80211_RATE_INFO_LEGACY,
+ sinfo->txrate.legacy);
+ else
+ NLA_PUT_U8(msg, NL80211_RATE_INFO_MCS,
+ sinfo->txrate.mcs);
+ if (sinfo->txrate.flags & RATE_INFO_FLAGS_40_MHZ_WIDTH)
+ NLA_PUT_FLAG(msg, NL80211_RATE_INFO_40_MHZ_WIDTH);
+ if (sinfo->txrate.flags & RATE_INFO_FLAGS_SHORT_GI)
+ NLA_PUT_FLAG(msg, NL80211_RATE_INFO_SHORT_GI);
+
+ nla_nest_end(msg, txrate);
+ }
nla_nest_end(msg, sinfoattr);
return genlmsg_end(msg, hdr);
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
next prev parent reply other threads:[~2008-12-07 18:21 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-25 20:31 RFC Patch: Add signal strength to nl80211station info Henning Rogge
2008-11-25 20:47 ` Johannes Berg
2008-11-25 21:01 ` Henning Rogge
2008-11-26 5:21 ` Marcel Holtmann
2008-11-26 8:32 ` Johannes Berg
2008-11-26 16:17 ` Henning Rogge
2008-11-29 10:50 ` RFC Patch v2: " Henning Rogge
2008-12-01 11:17 ` Johannes Berg
2008-12-01 13:22 ` Henning Rogge
2008-12-01 17:39 ` Luis R. Rodriguez
2008-12-01 17:45 ` Luis R. Rodriguez
2008-12-01 17:53 ` Henning Rogge
2008-12-02 13:25 ` Henning Rogge
2008-12-02 20:29 ` Luis R. Rodriguez
2008-12-02 20:46 ` Henning Rogge
2008-12-03 1:44 ` Luis R. Rodriguez
2008-12-03 10:31 ` Henning Rogge
2008-12-04 8:47 ` Johannes Berg
2008-12-04 9:48 ` Henning Rogge
2008-12-04 13:02 ` Johannes Berg
2008-12-04 20:26 ` Johannes Berg
2008-12-04 21:12 ` Luis R. Rodriguez
2008-12-04 21:20 ` Johannes Berg
2008-12-05 8:34 ` Henning Rogge
2008-12-05 9:45 ` Johannes Berg
2008-12-05 9:51 ` Henning Rogge
2008-12-05 9:54 ` Johannes Berg
2008-12-05 23:26 ` Henning Rogge
2008-12-06 9:15 ` Johannes Berg
2008-12-06 11:12 ` Henning Rogge
2008-12-06 14:10 ` Henning Rogge
2008-12-06 14:43 ` Henning Rogge
2008-12-06 14:51 ` Johannes Berg
2008-12-06 15:03 ` Henning Rogge
2008-12-06 15:46 ` Henning Rogge
2008-12-06 15:59 ` Johannes Berg
2008-12-06 16:08 ` Henning Rogge
2008-12-06 20:46 ` Luis R. Rodriguez
2008-12-07 17:32 ` Henning Rogge
2008-12-07 17:39 ` Johannes Berg
2008-12-07 18:17 ` Henning Rogge [this message]
2008-12-08 19:43 ` [PATCH 1/2] Add signal strength and bandwith " Johannes Berg
2008-12-09 19:50 ` Henning Rogge
2008-12-09 21:16 ` Johannes Berg
2008-12-10 6:53 ` Henning Rogge
2008-12-10 9:05 ` Johannes Berg
2008-12-10 17:40 ` Henning Rogge
2008-12-10 20:45 ` Johannes Berg
2008-12-10 20:58 ` Henning Rogge
2008-12-10 21:01 ` Johannes Berg
2008-12-11 17:07 ` [Patch] nl80211: " Henning Rogge
2008-12-11 17:24 ` Johannes Berg
2008-12-11 18:02 ` Henning Rogge
2008-12-11 18:14 ` Johannes Berg
2008-12-11 18:22 ` Henning Rogge
2008-12-11 18:28 ` Johannes Berg
2008-12-11 20:10 ` Henning Rogge
2008-12-11 20:24 ` Johannes Berg
2008-12-11 20:12 ` Henning Rogge
2008-12-11 20:23 ` Johannes Berg
2008-12-09 19:54 ` [Patch 1/2 v2] " Henning Rogge
2008-12-09 19:58 ` [Patch 2/2 " Henning Rogge
2008-12-09 21:19 ` Johannes Berg
2008-12-07 18:19 ` [PATCH 2/2] " Henning Rogge
2008-12-07 18:20 ` [PATCH 0/2] " Henning Rogge
2008-12-06 15:48 ` RFC Patch v2: Add signal strength " Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200812071917.07075.hrogge@googlemail.com \
--to=hrogge@googlemail.com \
--cc=Luis.Rodriguez@atheros.com \
--cc=holtmann@linux.intel.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=lrodriguez@atheros.com \
--cc=nbd@openwrt.org \
--cc=rogge@fgan.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).