linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Henning Rogge <hrogge@googlemail.com>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: Henning Rogge <rogge@fgan.de>,
	"Luis R. Rodriguez" <lrodriguez@atheros.com>,
	Luis Rodriguez <Luis.Rodriguez@atheros.com>,
	Marcel Holtmann <holtmann@linux.intel.com>,
	"linux-wireless" <linux-wireless@vger.kernel.org>,
	"nbd@openwrt.org" <nbd@openwrt.org>
Subject: Re: [PATCH 1/2] Add signal strength and bandwith to nl80211station info
Date: Wed, 10 Dec 2008 21:58:45 +0100	[thread overview]
Message-ID: <200812102158.56201.hrogge@googlemail.com> (raw)
In-Reply-To: <1228941937.15837.71.camel@johannes.berg>


[-- Attachment #1.1: Type: text/plain, Size: 3233 bytes --]

On Wednesday 10 December 2008 21:45:37 Johannes Berg wrote:
> On Wed, 2008-12-10 at 18:40 +0100, Henning Rogge wrote:
> Can you do what I asked for instead and not include the attribute when
> it has a bogus value?
I agree, that was a stupid thing...

Henning
-------------------------------
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 56450b4..cc93e7a 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -431,14 +431,14 @@ enum nl80211_sta_flags {
  * when getting information about the bitrate of a station.
  *
  * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_RATE_INFO_LEGACY: bitrate for 802.11abg (u16, 100kbit/s)
+ * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
  * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
  * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
  * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
  */
 enum nl80211_rate_info {
 	__NL80211_RATE_INFO_INVALID,
-	NL80211_RATE_INFO_LEGACY,
+	NL80211_RATE_INFO_BITRATE,
 	NL80211_RATE_INFO_MCS,
 	NL80211_RATE_INFO_40_MHZ_WIDTH,
 	NL80211_RATE_INFO_SHORT_GI,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 3f13928..4797b47 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1079,12 +1079,46 @@ static int parse_station_flags(struct nlattr *nla, u32 
*staflags)
 	return 0;
 }
 
+static u16 nl80211_calculate_bitrate(struct rate_info *rate)
+{
+	int modulation, streams, bitrate;
+
+	if (!(rate->flags & RATE_INFO_FLAGS_MCS))
+		return rate->legacy;
+
+	/* the formula below does only work for MCS values smaller than 32 */
+	if (rate->mcs >= 32)
+		return 0;
+
+	modulation = rate->mcs & 7;
+	streams = (rate->mcs >> 3) + 1;
+
+	bitrate = (rate->flags & RATE_INFO_FLAGS_40_MHZ_WIDTH) ?
+			13500000 : 6500000;
+
+	if (modulation < 4)
+		bitrate *= (modulation + 1);
+	else if (modulation == 4)
+		bitrate *= (modulation + 2);
+	else
+		bitrate *= (modulation + 3);
+
+	bitrate *= streams;
+
+	if (rate->flags & RATE_INFO_FLAGS_SHORT_GI)
+		bitrate = (bitrate / 9) * 10;
+
+	/* do NOT round down here */
+	return (bitrate + 50000) / 100000;
+}
+
 static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq,
 				int flags, struct net_device *dev,
 				u8 *mac_addr, struct station_info *sinfo)
 {
 	void *hdr;
 	struct nlattr *sinfoattr, *txrate;
+	u16 bitrate;
 
 	hdr = nl80211hdr_put(msg, pid, seq, flags, NL80211_CMD_NEW_STATION);
 	if (!hdr)
@@ -1122,11 +1156,12 @@ static int nl80211_send_station(struct sk_buff *msg, 
u32 pid, u32 seq,
 		if (!txrate)
 			goto nla_put_failure;
 
+		/* nl80211_calculate_bitrate will return 0 for mcs >= 32 */
+		bitrate = nl80211_calculate_bitrate(&sinfo->txrate);
+		if (bitrate > 0)
+			NLA_PUT_U16(msg, NL80211_RATE_INFO_BITRATE, bitrate);
 
-		if (!(sinfo->txrate.flags & RATE_INFO_FLAGS_MCS))
-			NLA_PUT_U16(msg, NL80211_RATE_INFO_LEGACY,
-				    sinfo->txrate.legacy);
-		else
+		if (sinfo->txrate.flags & RATE_INFO_FLAGS_MCS)
 			NLA_PUT_U8(msg, NL80211_RATE_INFO_MCS,
 				    sinfo->txrate.mcs);
 		if (sinfo->txrate.flags & RATE_INFO_FLAGS_40_MHZ_WIDTH)


[-- Attachment #1.2: nl80211ext_v11_2.patch --]
[-- Type: text/x-patch, Size: 2927 bytes --]

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 56450b4..cc93e7a 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -431,14 +431,14 @@ enum nl80211_sta_flags {
  * when getting information about the bitrate of a station.
  *
  * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_RATE_INFO_LEGACY: bitrate for 802.11abg (u16, 100kbit/s)
+ * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
  * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
  * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
  * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
  */
 enum nl80211_rate_info {
 	__NL80211_RATE_INFO_INVALID,
-	NL80211_RATE_INFO_LEGACY,
+	NL80211_RATE_INFO_BITRATE,
 	NL80211_RATE_INFO_MCS,
 	NL80211_RATE_INFO_40_MHZ_WIDTH,
 	NL80211_RATE_INFO_SHORT_GI,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 3f13928..4797b47 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1079,12 +1079,46 @@ static int parse_station_flags(struct nlattr *nla, u32 *staflags)
 	return 0;
 }
 
+static u16 nl80211_calculate_bitrate(struct rate_info *rate)
+{
+	int modulation, streams, bitrate;
+
+	if (!(rate->flags & RATE_INFO_FLAGS_MCS))
+		return rate->legacy;
+
+	/* the formula below does only work for MCS values smaller than 32 */
+	if (rate->mcs >= 32)
+		return 0;
+
+	modulation = rate->mcs & 7;
+	streams = (rate->mcs >> 3) + 1;
+
+	bitrate = (rate->flags & RATE_INFO_FLAGS_40_MHZ_WIDTH) ?
+			13500000 : 6500000;
+
+	if (modulation < 4)
+		bitrate *= (modulation + 1);
+	else if (modulation == 4)
+		bitrate *= (modulation + 2);
+	else
+		bitrate *= (modulation + 3);
+
+	bitrate *= streams;
+
+	if (rate->flags & RATE_INFO_FLAGS_SHORT_GI)
+		bitrate = (bitrate / 9) * 10;
+
+	/* do NOT round down here */
+	return (bitrate + 50000) / 100000;
+}
+
 static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq,
 				int flags, struct net_device *dev,
 				u8 *mac_addr, struct station_info *sinfo)
 {
 	void *hdr;
 	struct nlattr *sinfoattr, *txrate;
+	u16 bitrate;
 
 	hdr = nl80211hdr_put(msg, pid, seq, flags, NL80211_CMD_NEW_STATION);
 	if (!hdr)
@@ -1122,11 +1156,12 @@ static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq,
 		if (!txrate)
 			goto nla_put_failure;
 
+		/* nl80211_calculate_bitrate will return 0 for mcs >= 32 */
+		bitrate = nl80211_calculate_bitrate(&sinfo->txrate);
+		if (bitrate > 0)
+			NLA_PUT_U16(msg, NL80211_RATE_INFO_BITRATE, bitrate);
 
-		if (!(sinfo->txrate.flags & RATE_INFO_FLAGS_MCS))
-			NLA_PUT_U16(msg, NL80211_RATE_INFO_LEGACY,
-				    sinfo->txrate.legacy);
-		else
+		if (sinfo->txrate.flags & RATE_INFO_FLAGS_MCS)
 			NLA_PUT_U8(msg, NL80211_RATE_INFO_MCS,
 				    sinfo->txrate.mcs);
 		if (sinfo->txrate.flags & RATE_INFO_FLAGS_40_MHZ_WIDTH)

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

  reply	other threads:[~2008-12-10 20:59 UTC|newest]

Thread overview: 66+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-11-25 20:31 RFC Patch: Add signal strength to nl80211station info Henning Rogge
2008-11-25 20:47 ` Johannes Berg
2008-11-25 21:01   ` Henning Rogge
2008-11-26  5:21   ` Marcel Holtmann
2008-11-26  8:32     ` Johannes Berg
2008-11-26 16:17     ` Henning Rogge
2008-11-29 10:50     ` RFC Patch v2: " Henning Rogge
2008-12-01 11:17       ` Johannes Berg
2008-12-01 13:22         ` Henning Rogge
2008-12-01 17:39           ` Luis R. Rodriguez
2008-12-01 17:45             ` Luis R. Rodriguez
2008-12-01 17:53             ` Henning Rogge
2008-12-02 13:25             ` Henning Rogge
2008-12-02 20:29               ` Luis R. Rodriguez
2008-12-02 20:46                 ` Henning Rogge
2008-12-03  1:44                   ` Luis R. Rodriguez
2008-12-03 10:31                     ` Henning Rogge
2008-12-04  8:47                       ` Johannes Berg
2008-12-04  9:48                         ` Henning Rogge
2008-12-04 13:02                           ` Johannes Berg
2008-12-04 20:26                       ` Johannes Berg
2008-12-04 21:12                         ` Luis R. Rodriguez
2008-12-04 21:20                           ` Johannes Berg
2008-12-05  8:34                             ` Henning Rogge
2008-12-05  9:45                               ` Johannes Berg
2008-12-05  9:51                                 ` Henning Rogge
2008-12-05  9:54                                   ` Johannes Berg
2008-12-05 23:26                                     ` Henning Rogge
2008-12-06  9:15                                       ` Johannes Berg
2008-12-06 11:12                                         ` Henning Rogge
2008-12-06 14:10                                 ` Henning Rogge
2008-12-06 14:43                                   ` Henning Rogge
2008-12-06 14:51                                   ` Johannes Berg
2008-12-06 15:03                                     ` Henning Rogge
2008-12-06 15:46                                       ` Henning Rogge
2008-12-06 15:59                                         ` Johannes Berg
2008-12-06 16:08                                           ` Henning Rogge
2008-12-06 20:46                                           ` Luis R. Rodriguez
2008-12-07 17:32                                             ` Henning Rogge
2008-12-07 17:39                                               ` Johannes Berg
2008-12-07 18:17                                                 ` [PATCH 1/2] Add signal strength and bandwith " Henning Rogge
2008-12-08 19:43                                                   ` Johannes Berg
2008-12-09 19:50                                                     ` Henning Rogge
2008-12-09 21:16                                                       ` Johannes Berg
2008-12-10  6:53                                                         ` Henning Rogge
2008-12-10  9:05                                                           ` Johannes Berg
2008-12-10 17:40                                                             ` Henning Rogge
2008-12-10 20:45                                                               ` Johannes Berg
2008-12-10 20:58                                                                 ` Henning Rogge [this message]
2008-12-10 21:01                                                                   ` Johannes Berg
2008-12-11 17:07                                                                     ` [Patch] nl80211: " Henning Rogge
2008-12-11 17:24                                                                       ` Johannes Berg
2008-12-11 18:02                                                                         ` Henning Rogge
2008-12-11 18:14                                                                           ` Johannes Berg
2008-12-11 18:22                                                                             ` Henning Rogge
2008-12-11 18:28                                                                               ` Johannes Berg
2008-12-11 20:10                                                                                 ` Henning Rogge
2008-12-11 20:24                                                                                   ` Johannes Berg
2008-12-11 20:12                                                                                 ` Henning Rogge
2008-12-11 20:23                                                                                   ` Johannes Berg
2008-12-09 19:54                                                     ` [Patch 1/2 v2] " Henning Rogge
2008-12-09 19:58                                                     ` [Patch 2/2 " Henning Rogge
2008-12-09 21:19                                                       ` Johannes Berg
2008-12-07 18:19                                                 ` [PATCH 2/2] " Henning Rogge
2008-12-07 18:20                                                 ` [PATCH 0/2] " Henning Rogge
2008-12-06 15:48                                       ` RFC Patch v2: Add signal strength " Johannes Berg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200812102158.56201.hrogge@googlemail.com \
    --to=hrogge@googlemail.com \
    --cc=Luis.Rodriguez@atheros.com \
    --cc=holtmann@linux.intel.com \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    --cc=lrodriguez@atheros.com \
    --cc=nbd@openwrt.org \
    --cc=rogge@fgan.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).