From: Ivo van Doorn <ivdoorn@gmail.com>
To: John Linville <linville@tuxdriver.com>
Cc: "linux-wireless" <linux-wireless@vger.kernel.org>,
rt2400-devel@lists.sourceforge.net
Subject: [PATCH 5/15] rt2x00: Add mesh support
Date: Sat, 20 Dec 2008 10:55:34 +0100 [thread overview]
Message-ID: <200812201055.34597.IvDoorn@gmail.com> (raw)
In-Reply-To: <200812201054.54391.IvDoorn@gmail.com>
From: Andrey Yurovsky <andrey@cozybit.com>
This adds initial support for Mesh Point mode. For this we tell mac80211 that
we support NL80211_IFTYPE_MESH_POINT. We also need to send beacons. mac80211
will configure our RX filter accordingly.
Signed-off-by: Andrey Yurovsky <andrey@cozybit.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2x00config.c | 1 +
drivers/net/wireless/rt2x00/rt2x00dev.c | 11 +++++++----
drivers/net/wireless/rt2x00/rt2x00mac.c | 1 +
3 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 2f4cb8d..a35265c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -42,6 +42,7 @@ void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev,
switch (type) {
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_MESH_POINT:
conf.sync = TSF_SYNC_BEACON;
break;
case NL80211_IFTYPE_STATION:
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 1c49a9c..b484197 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -190,7 +190,8 @@ static void rt2x00lib_beacondone_iter(void *data, u8 *mac,
struct rt2x00_intf *intf = vif_to_intf(vif);
if (vif->type != NL80211_IFTYPE_AP &&
- vif->type != NL80211_IFTYPE_ADHOC)
+ vif->type != NL80211_IFTYPE_ADHOC &&
+ vif->type != NL80211_IFTYPE_MESH_POINT)
return;
/*
@@ -782,7 +783,8 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
if (rt2x00dev->ops->bcn->entry_num > 0)
rt2x00dev->hw->wiphy->interface_modes |=
BIT(NL80211_IFTYPE_ADHOC) |
- BIT(NL80211_IFTYPE_AP);
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_MESH_POINT);
/*
* Let the driver probe the device to detect the capabilities.
@@ -937,10 +939,11 @@ static void rt2x00lib_resume_intf(void *data, u8 *mac,
/*
- * Master or Ad-hoc mode require a new beacon update.
+ * AP, Ad-hoc, and Mesh Point mode require a new beacon update.
*/
if (vif->type == NL80211_IFTYPE_AP ||
- vif->type == NL80211_IFTYPE_ADHOC)
+ vif->type == NL80211_IFTYPE_ADHOC ||
+ vif->type == NL80211_IFTYPE_MESH_POINT)
intf->delayed_flags |= DELAYED_UPDATE_BEACON;
spin_unlock(&intf->lock);
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 38edee5..137386e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -226,6 +226,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
break;
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_MESH_POINT:
/*
* We don't support mixed combinations of
* sta and ap interfaces.
--
1.5.6.1
next prev parent reply other threads:[~2008-12-20 10:01 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-20 9:52 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
2008-12-20 9:52 ` [PATCH 1/15] rt2x00: Implement Powersaving Ivo van Doorn
2008-12-20 9:53 ` [PATCH 2/15] rt2x00: Move link tuning into seperate file Ivo van Doorn
2008-12-20 9:54 ` [PATCH 3/15] rt2x00: Reduce calls to bbp_read() Ivo van Doorn
2008-12-20 9:54 ` [PATCH 4/15] rt2x00: Restrict interface between rt2x00link and drivers Ivo van Doorn
2008-12-20 9:55 ` Ivo van Doorn [this message]
2008-12-20 9:55 ` [PATCH 6/15] rt2x00: Add RFKILL support to rt2500usb and rt73usb Ivo van Doorn
2008-12-20 9:56 ` [PATCH 7/15] rt2x00: Rename CONFIG_CRYPTO_COPY_IV Ivo van Doorn
2008-12-20 9:57 ` [PATCH 8/15] rt2x00: Implement WDS support Ivo van Doorn
2008-12-20 9:57 ` [PATCH 9/15] rt2x00: Split EEPROM_NIC_TX_RX_FIXED Ivo van Doorn
2008-12-20 9:58 ` [PATCH 10/15] rt2x00: Move code into seperate functions Ivo van Doorn
2008-12-20 9:59 ` [PATCH 11/15] rt2x00: Remove ENTRY_TXD_OFDM_RATE Ivo van Doorn
2008-12-20 9:59 ` [PATCH 12/15] Allow drivers to pass the noise value during rxdone Ivo van Doorn
2008-12-20 9:59 ` [PATCH 13/15] rt2x00: Introduce RXDONE_SIGNAL_MASK mask Ivo van Doorn
2008-12-20 10:00 ` [PATCH 14/15] rt2x00: Fix segementation fault Ivo van Doorn
2008-12-20 10:00 ` [PATCH 15/15] rt2x00: Release rt2x00 2.3.0 Ivo van Doorn
2008-12-23 12:19 ` [PATCH 10/15] rt2x00: Move code into seperate functions David Shwatrz
2008-12-21 10:37 ` [PATCH 8/15] rt2x00: Implement WDS support Johannes Berg
2008-12-21 12:07 ` Ivo van Doorn
2008-12-21 17:53 ` [PATCH 1/15] rt2x00: Implement Powersaving David Shwatrz
2008-12-22 7:34 ` Holger Schurig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200812201055.34597.IvDoorn@gmail.com \
--to=ivdoorn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=rt2400-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).