From: "W. van den Akker" <listsrv@wilsoft.nl>
To: linux-wireless@vger.kernel.org
Subject: Re: Still problems to get ath9k in accessmode. Kernel hangs
Date: Sat, 3 Jan 2009 14:56:07 +0100 [thread overview]
Message-ID: <200901031456.07988.listsrv@wilsoft.nl> (raw)
In-Reply-To: <200901011444.20333.listsrv@wilsoft.nl>
On Thursday 01 January 2009, you wrote:
> Jouni Malinen <j <at> w1.fi> writes:
> > I've never tested this with compat-wireless, but the wireless-testing
> > version seems to be working fine in my tests.
> >
> > > I have build the kernel, compiled the compat-wireless and did a make
>
> install.
>
> > > Make unload didnt work because some drivers were in use (mac80211).
> > > First problem arises, a rmmod ath9k hangs the kernel. No message of
> > > what
>
> so
>
> > > ever in the log or to stdout.
> >
> > Would you happen to have another host available for storing the logs? I
> > have been able to receive debug messages from most crashes with
> > netconsole (see Documentation/networking/netconsole.txt).
>
> I have tested on the server with the latest wireless-testing the past days
> (2.6.28-rc9-wl). The wireless-testing looks somewhat more stable then the
> compat-wireless.
>
> I have also installed the netconsole module to watch any kernel prints.
> After running hostapd (v0.6.6) from command line the AP is up-and-running.
> Then if I connect with the laptop (tested it with kernel .26 and .28 on the
> laptop) I get a connection and can start a browser en explore the internet.
> If I start a second session (Kmail or second browser) the
> server hangs within a minute. Leaving again no trace on the console,
> hostapd-log or netconsole.
> Only way to reset the server is switch off the power.
> Its very frustrating because no information or what so ever can be found.
>
> If I connect an internet radio (Musicpal) to the server there is no
> problem. It stays stable for hours. If I also connect the laptop and start
> a browser the server hangs again within minuts.
>
> Its looks like if there is a second connection been set up the server
> hangs.
>
I have narrowed the problem down to the number of connections setted up in a
short time.
If a system (notebook, internetradio or what so ever) setup a number of
connections is a very short time (couple of seconds) the server crashes.
If I start Kmail on the notebook (with 5 mailboxes) the server crashes within
seconds. Its always reproduceble. If I change the broadcast on the
internetradio fast (for example 3 time with seconds between them) server
hangs.
All the server hang ups dont leave a trace in log or console what so ever.
Hope this gives any additional information.
gr,
Willem
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
next prev parent reply other threads:[~2009-01-03 13:56 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-01 13:44 Still problems to get ath9k in accessmode. Kernel hangs W. van den Akker
2009-01-03 13:56 ` W. van den Akker [this message]
2009-01-05 9:41 ` Jouni Malinen
2009-01-06 7:57 ` W. van den Akker
2009-01-06 14:52 ` W. van den Akker
2009-01-06 20:32 ` W. van den Akker
2009-01-06 20:51 ` pat-lkml
2009-01-06 22:42 ` W. van den Akker
2009-01-07 15:42 ` W. van den Akker
2009-01-10 11:26 ` W. van den Akker
2009-01-10 19:50 ` pat-lkml
2009-01-12 7:47 ` W. van den Akker
-- strict thread matches above, loose matches on Subject: below --
2008-12-24 9:40 W. van den Akker
2008-12-24 10:07 ` Jouni Malinen
2008-12-24 17:45 ` Luis R. Rodriguez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200901031456.07988.listsrv@wilsoft.nl \
--to=listsrv@wilsoft.nl \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).