* regression: no interfaces with rtl8180 driver post 2.6.28 git
@ 2009-01-04 15:12 Andi Kleen
2009-01-04 15:18 ` Fabio Rossi
0 siblings, 1 reply; 2+ messages in thread
From: Andi Kleen @ 2009-01-04 15:12 UTC (permalink / raw)
To: linville, linux-wireless
I got a
06:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
PCI card in a box. With 2.6.28 it works (although rather poorly, always
seems to eventually fallback to 1Mbit/s). With post 2.6.28-git latest the card
is still detected, but no wlan0 interface is created anymore, only
wmaster0:
Some excerpts from the log.
rtl8180 0000:06:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
wmaster0 (rtl8180): not using net_device_ops yet
phy0: Selected rate control algorithm 'minstrel'
phy0: hwaddr 00:18:e7:49:f4:32, RTL8185vD + rtl8225z2
On 2.6.28 I get a wlan0 and roughly the same messages (except
for the net_device_ops one, but I think that's harmless)
I first suspected udev, but there's no trace of wlan0 anywhere
in /sys, so it looks like it's not even create in kernel.
Git tip 7d3b56ba37a95f1f370f50258ed3954c304c524b
Userland is opensuse 11.1.
-Andi
--
ak@linux.intel.com
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: regression: no interfaces with rtl8180 driver post 2.6.28 git
2009-01-04 15:12 regression: no interfaces with rtl8180 driver post 2.6.28 git Andi Kleen
@ 2009-01-04 15:18 ` Fabio Rossi
0 siblings, 0 replies; 2+ messages in thread
From: Fabio Rossi @ 2009-01-04 15:18 UTC (permalink / raw)
To: Andi Kleen; +Cc: linville, linux-wireless
On Sunday 04 January 2009, Andi Kleen wrote:
> I got a
>
> 06:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE
> 802.11a/b/g Wireless LAN Controller (rev 20)
>
> PCI card in a box. With 2.6.28 it works (although rather poorly, always
> seems to eventually fallback to 1Mbit/s). With post 2.6.28-git latest the
> card is still detected, but no wlan0 interface is created anymore, only
> wmaster0:
>
> Some excerpts from the log.
>
> rtl8180 0000:06:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> wmaster0 (rtl8180): not using net_device_ops yet
> phy0: Selected rate control algorithm 'minstrel'
> phy0: hwaddr 00:18:e7:49:f4:32, RTL8185vD + rtl8225z2
>
> On 2.6.28 I get a wlan0 and roughly the same messages (except
> for the net_device_ops one, but I think that's harmless)
>
> I first suspected udev, but there's no trace of wlan0 anywhere
> in /sys, so it looks like it's not even create in kernel.
>
> Git tip 7d3b56ba37a95f1f370f50258ed3954c304c524b
> Userland is opensuse 11.1.
>
> -Andi
It should be a known problem already fixed in wireless-testing: try the patch
http://article.gmane.org/gmane.linux.kernel.wireless.general/25813/match=rtl8180
Fabio
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-01-04 15:19 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-01-04 15:12 regression: no interfaces with rtl8180 driver post 2.6.28 git Andi Kleen
2009-01-04 15:18 ` Fabio Rossi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).