Re: [stable] [ath9k-devel] 2.6.2{7, 8} with compat-wireless-2008-12-3{0, 1) drops link every 2-3 minutes

["Luis R. Rodriguez" <lrodriguez@atheros.com>]

On Thu, Jan 15, 2009 at 10:37:03AM -0800, Greg KH wrote:
> On Mon, Jan 05, 2009 at 09:04:32AM -0800, Luis R. Rodriguez wrote:
> > On Wed, Dec 31, 2008 at 11:52:32PM -0800, Joseph Cheek wrote:
> > > Hi all,
> > >
> > > Happy New Year!  It's about 2:30 AM here and I'm up debugging my shiny
> > > new DWA-552 <AR5416+AR2133> XtremeN Desktop Adapter.  Stock 2.6.28 gave
> > > me the dreaded "No ProbeResp from current AP" in syslog with a
> > > disconnect every few minutes, even after updating
> > > |IEEE80211_MONITORING_INTERVAL to (100 * HZ).  It's highly annoying.
> >
> > This should be due to the fact that the RX filter disabled beaconing from
> > the current AP and mac80211 expects beacons from the AP. This was fixed
> > in wireless-testing but I do not see this pushed out for 2.6.28.
> >
> > Greg, this was fixed in Linus' tree via ffb826767bffda61426d964a8fc24a216a14b0bd,
> > merged by John on Fri, 21 Nov 2008, the patch is titled:
> > "ath9k: enable RXing of beacons on STA/IBSS". Just in case I've
> > provided the hunk below. Without this patch users will face this disconnect
> > issue on noisy environments where the beacons don't reach mac80211 within
> > a certain time frame dicated by mac80211.
> 
> Thanks, I'll queue this up for 2.6.28, but it doesn't apply to
> 2.6.27-stable.  If you want it there, can you please provide a backport
> for it?

Thanks Greg -- it seems this was actually present in 2.6.27 since the
initial commit of ath9k. From the initial commit I see:

--- on ath_calcrxfilter()
        if (sc->sc_opmode == ATH9K_M_STA || sc->sc_opmode == ATH9K_M_IBSS ||
            sc->sc_scanning)
                rfilt |= ATH9K_RX_FILTER_BEACON;
---

Seems we're good on 27 for this and this actually turned out to be a regression then.

  Luis