linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Johannes Berg <johannes@sipsolutions.net>
To: John Linville <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 04/11] mac80211: restrict aggregation to supported interface modes
Date: Thu, 05 Feb 2009 17:07:42 +0100	[thread overview]
Message-ID: <20090205161132.351536213@sipsolutions.net> (raw)
In-Reply-To: 20090205160738.990564487@sipsolutions.net

We can only support aggregation on AP/STA right now. HT isn't defined
for IBSS, WDS or MESH. In the WDS/MESH cases it's not clear what to
put into the IBSS field, and we don't handle that in the code at all.
Also fix the code to handle VLAN correctly.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
---
v2: do not allow IBSS

 net/mac80211/agg-rx.c |    3 ++-
 net/mac80211/agg-tx.c |   16 +++++++++++++++-
 net/mac80211/ht.c     |    3 ++-
 net/mac80211/rx.c     |   11 +++++++++++
 4 files changed, 30 insertions(+), 3 deletions(-)

--- wireless-testing.orig/net/mac80211/agg-tx.c	2009-02-04 16:03:33.000000000 +0100
+++ wireless-testing/net/mac80211/agg-tx.c	2009-02-04 16:03:34.000000000 +0100
@@ -41,7 +41,8 @@ static void ieee80211_send_addba_request
 	memset(mgmt, 0, 24);
 	memcpy(mgmt->da, da, ETH_ALEN);
 	memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
-	if (sdata->vif.type == NL80211_IFTYPE_AP)
+	if (sdata->vif.type == NL80211_IFTYPE_AP ||
+	    sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
 		memcpy(mgmt->bssid, sdata->dev->dev_addr, ETH_ALEN);
 	else
 		memcpy(mgmt->bssid, ifsta->bssid, ETH_ALEN);
@@ -180,6 +181,19 @@ int ieee80211_start_tx_ba_session(struct
 		goto exit;
 	}
 
+	/*
+	 * The aggregation code is not prepared to handle
+	 * anything but STA/AP due to the BSSID handling.
+	 * IBSS could work in the code but isn't supported
+	 * by drivers or the standard.
+	 */
+	if (sta->sdata->vif.type != NL80211_IFTYPE_STATION &&
+	    sta->sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
+	    sta->sdata->vif.type != NL80211_IFTYPE_AP) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
 	spin_lock_bh(&sta->lock);
 
 	/* we have tried too many times, receiver does not want A-MPDU */
--- wireless-testing.orig/net/mac80211/rx.c	2009-02-04 16:03:29.000000000 +0100
+++ wireless-testing/net/mac80211/rx.c	2009-02-04 16:03:34.000000000 +0100
@@ -1735,6 +1735,17 @@ ieee80211_rx_h_action(struct ieee80211_r
 
 	switch (mgmt->u.action.category) {
 	case WLAN_CATEGORY_BACK:
+		/*
+		 * The aggregation code is not prepared to handle
+		 * anything but STA/AP due to the BSSID handling;
+		 * IBSS could work in the code but isn't supported
+		 * by drivers or the standard.
+		 */
+		if (sdata->vif.type != NL80211_IFTYPE_STATION &&
+		    sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
+		    sdata->vif.type != NL80211_IFTYPE_AP)
+			return RX_DROP_MONITOR;
+
 		switch (mgmt->u.action.u.addba_req.action_code) {
 		case WLAN_ACTION_ADDBA_REQ:
 			if (len < (IEEE80211_MIN_ACTION_SIZE +
--- wireless-testing.orig/net/mac80211/agg-rx.c	2009-02-04 16:03:33.000000000 +0100
+++ wireless-testing/net/mac80211/agg-rx.c	2009-02-04 16:03:34.000000000 +0100
@@ -134,7 +134,8 @@ static void ieee80211_send_addba_resp(st
 	memset(mgmt, 0, 24);
 	memcpy(mgmt->da, da, ETH_ALEN);
 	memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
-	if (sdata->vif.type == NL80211_IFTYPE_AP)
+	if (sdata->vif.type == NL80211_IFTYPE_AP ||
+	    sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
 		memcpy(mgmt->bssid, sdata->dev->dev_addr, ETH_ALEN);
 	else
 		memcpy(mgmt->bssid, ifsta->bssid, ETH_ALEN);
--- wireless-testing.orig/net/mac80211/ht.c	2009-02-04 16:03:33.000000000 +0100
+++ wireless-testing/net/mac80211/ht.c	2009-02-04 16:03:34.000000000 +0100
@@ -190,7 +190,8 @@ void ieee80211_send_delba(struct ieee802
 	memset(mgmt, 0, 24);
 	memcpy(mgmt->da, da, ETH_ALEN);
 	memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
-	if (sdata->vif.type == NL80211_IFTYPE_AP)
+	if (sdata->vif.type == NL80211_IFTYPE_AP ||
+	    sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
 		memcpy(mgmt->bssid, sdata->dev->dev_addr, ETH_ALEN);
 	else
 		memcpy(mgmt->bssid, ifsta->bssid, ETH_ALEN);

-- 


  parent reply	other threads:[~2009-02-05 16:15 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-02-05 16:07 [PATCH 00/11] mac80211 aggregation cleanups/fixes Johannes Berg
2009-02-05 16:07 ` [PATCH 01/11] mac80211: remove stray aggregation debugfs definition Johannes Berg
2009-02-05 16:07 ` [PATCH 02/11] mac80211: fix RX aggregation timeouts Johannes Berg
2009-02-05 16:07 ` [PATCH 03/11] mac80211: restructure HT code Johannes Berg
2009-02-05 16:07 ` Johannes Berg [this message]
2009-02-05 16:07 ` [PATCH 05/11] mac80211: hardware should not deny going back to legacy Johannes Berg
2009-02-05 16:07 ` [PATCH 06/11] mac80211: document TX aggregation (and small cleanup) Johannes Berg
2009-02-05 16:07 ` [PATCH 07/11] mac80211: fix race in TX aggregation Johannes Berg
2009-02-06 19:13   ` Luis R. Rodriguez
2009-02-06 20:37     ` Johannes Berg
2009-02-05 16:07 ` [PATCH 08/11] mac80211: fix aggregation timer lockups Johannes Berg
2009-02-05 16:07 ` [PATCH 09/11] mac80211: clean up BA session teardown Johannes Berg
2009-02-05 16:07 ` [PATCH 10/11] mac80211: RX aggregation: clean up stop session Johannes Berg
2009-02-05 16:07 ` [PATCH 11/11] mac80211: further cleanups to stopping BA sessions Johannes Berg
2009-02-06 22:32 ` [PATCH 00/11] mac80211 aggregation cleanups/fixes Luis R. Rodriguez

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090205161132.351536213@sipsolutions.net \
    --to=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).