Re: iwlagn warning in 2.6.29-rc6

["Carlos R. Mafra" <crmafra2@gmail.com>]

On Mon 23.Feb'09 at 14:45:06 -0800, reinette chatre wrote:
> On Mon, 2009-02-23 at 13:26 -0800, Carlos R. Mafra wrote:
> > I've just got this warning in my Vaio laptop:
> > 
> > ------------[ cut here ]------------
> > WARNING: at drivers/net/wireless/iwlwifi/iwl-tx.c:1254 iwl_tx_cmd_complete+0x28a/0x2e0()
> > Hardware name: VGN-FZ240E
> > wrong command queue 31, sequence 0x7FFF readp=241 writep=241
> > Modules linked in: usbhid nvram snd_hda_codec_idt snd_hda_intel snd_hda_codec uvcvideo snd_hwdep snd_pcm iwlagn videodev snd_timer sky2 v4l1_compat v4l2_compat_ioctl32 evdev sg i2c_i801 snd_page_alloc sr_mod ata_piix ahci libata sd_mod scsi_mod uhci_hcd ohci_hcd ehci_hcd usbcore [last unloaded: scsi_wait_scan]
> > Pid: 0, comm: swapper Not tainted 2.6.29-rc6 #37
> > [...]
> 
> This sounds like
> http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1703 for
> which new uCode was released to address the problem. Could you please
> try with the most recent 4965 uCode available from
> http://www.intellinuxwireless.org/?n=Downloads ?

Ok, I tried it and so far got no warnings at all.

I will keep looking the dmesg for a few days, and if you
don't hear back from me that means it is gone for good.

Thanks for your prompt answer!