From: "John W. Linville" <linville@tuxdriver.com>
To: davem@davemloft.net
Cc: linux-wireless@vger.kernel.org
Subject: pull request: wireless-next-2.6 2009-02-27
Date: Fri, 27 Feb 2009 15:41:10 -0500 [thread overview]
Message-ID: <20090227204110.GJ3687@tuxdriver.com> (raw)
Dave,
Here is an even bigger batch of changes intended for 2.6.30. They run
the usual gamut of wireless driver and mac80211 changes...
I have reverted the genetlink patch from Johannes and another of
his that relied upon it. There is also still that ugly one from me.
It is a kluge but it prevents a crash on my Lenovo T400. I bisected
the crash down to "mac80211: use cfg80211s BSS infrastructure",
which is already in net-next-2.6. Still, if it is too ugly then let
me know and I'll reformulate without it.
Please let me know if there are problems!
Thanks,
John
---
Individual patches are available here:
http://www.kernel.org/pub/linux/kernel/people/linville/wireless-next-2.6/
---
The following changes since commit f11c179eea77b8afc2fb7cb4b9a8815b85e3c16f:
David S. Miller (1):
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6.git master
Abhijeet Kolekar (7):
iwl3945: use iwl_rx_scan handlers
iwl3945: use iwl_mac_hw_scan callback
iwl3945: use iwl rx handlers
iwl3945: use iwl_rx_reply_error notification
iwl3945: remove duplicate interrupt code
iwl3945: use iwl_isr
iwl3945: use SW rfkill from iwlwifi
Alina Friedrichsen (4):
ath9k: Don't reset TSF after scanning automatically
mac80211: Introduce a generic commit() to apply changes
mac80211: Don't merge with the same BSSID
mac80211: Give it some time to do the TSF sync
Bing Zhao (1):
libertas: fix power save issue in libertas_sdio module
Bob Copeland (11):
ath9k: remove write-only current_rd_inuse
ath9k: save a few calls to ath9k_regd_get_eepromRD
ath9k: convert isWwrSKU macro into C code
ath9k: remove ath9k_regd_get_rd()
ath9k: remove prototype for ath9k_regd_get_current_country
ath9k: move common regulatory code out of if() branches
ath5k: don't mask off interrupt bits
ath5k: use spin_lock_irqsave for beacon lock
ath5k: move beacon processing to a tasklet
ath5k: compute rts/cts duration after computing full pktlen
ath9k: fix 802.11g conformance test limit typo
Dan Williams (5):
hostap: convert usage of net/ieee80211.h to linux/ieee80211.h
make net/ieee80211.h private to ipw2x00
cfg80211: age scan results on resume
ipw2x00: age scan results on resume
libertas: use private SDIO workqueue to avoid scheduling latency
David Kilroy (2):
orinoco: validate firmware header
orinoco: prevent accessing memory outside the firmware image
Fenghua Yu (1):
iwlwifi: dma mapping read and write changes
Helmut Schaa (1):
iwlagn: clean up error path in iwl_pci_probe
Ivo van Doorn (4):
rt2x00: uncomment get_tsf
rt2x00: Remove check for rf word 0
rt2x00: Add various new USB IDs for rt73usb
rt2x00: Fix RF offset
Jason Andryuk (7):
at76c50x-usb: update to latest mac80211 hw scan api
at76c50x-usb: convert at76_debug to an unsigned int
at76c50x-usb: fix oops on disconnect
at76c50x-usb: clean up DMA on stack
at76c50x-usb: additional disconnect fixes
iwl3945: initialize is_valid_rtc_data_addr function pointer
iwl3945: re-add iwl_poll_direct_bit return value check
Jiri Slaby (1):
ipw2200, fix ipw io functions
Johannes Berg (8):
mac80211: disallow moving netns
mac80211: fix aggregation for hardware with ampdu queues
mac80211: split IBSS/managed code
cfg80211/mac80211: fill qual.qual value/adjust max_qual.qual
mac80211: add missing kernel-doc
nl80211: remove admin requirement from station get
cfg80211: clean up signal type
mac80211/cfg80211: move iwrange handler to cfg80211
John Daiker (1):
b43: checkpatch.pl cleanups
John W. Linville (2):
airo: correct improper initialization of local variable
iwlagn: default to MAX_UCODE_BEACON_INTERVAL in iwl_adjust_beacon_interval
Jouni Malinen (4):
nl80211: Optional IEs into scan request
nl80211: Provide access to STA TX/RX packet counters
ath9k: Unlock sc->mutex on error path
nl80211: Avoid AP mode BUG_ON hang with invalid lock assert
Kalle Valo (3):
at76c50x-usb: add driver
at76c50x-usb: add link to the TODO list
at76c50x-usb: use dev_name() instead of struct device.bus_id
Luis R. Rodriguez (23):
cfg80211: rename cfg80211_registered_device's idx to wiphy_idx
cfg80211: add wiphy_idx_valid to check for wiphy_idx sanity
cfg80211: rename cfg80211_drv_mutex to cfg80211_mutex
nl80211: disallow user requests prior to regulatory_init()
cfg80211: add regulatory_hint_core() to separate the core reg hint
cfg80211: propagate -ENOMEM during regulatory_init()
cfg80211: add assert_cfg80211_lock() to ensure proper protection
cfg80211: make regulatory_request use wiphy_idx instead of wiphy
cfg80211: protect first access of last_request on 11d hint under mutex
cfg80211: remove likely from an 11d hint case
cfg80211: free rd on unlikely event on 11d hint
cfg80211: move all regulatory hints to workqueue
cfg80211: comments style cleanup
cfg80211: allow drivers that agree on regulatory to agree
cfg80211: rename regdom_changed to regdom_changes() and use it
cfg80211: enable active-scan / beaconing on Ch 1-11 for world regdom
cfg80211: enable 5 GHz world roaming channels
cfg80211: Add AP beacon regulatory hints
ath9k: follow beacon hints on reg_notifier when world roaming
cfg80211: make __regulatory_hint() static
cfg80211: pass the regulatory_request struct in __regulatory_hint()
cfg80211: do not kzalloc() again for a new request on __regulatory_hint
cfg80211: pass the regulatory_request to ignore_request
Michael Buesch (16):
b43: Move DMA stop sanity check
b43: Fix DMA buffer size handling
b43: Optimize DMA buffers
b43: Add slot count compiletime assertion
b43: Fix radio host flags
b43: Honor the no-slow-clock boardflag
b43: Enable PCI slow clock workaround, if needed.
mac80211: Add software scan notifiers
b43: Implement sw scan callbacks
b43: Convert usage of b43_phy_set()
b43: Convert usage of b43_phy_mask()
b43: Convert usage of b43_phy_maskset()
b43: Convert usage of b43_radio_set()
b43: Convert usage of b43_radio_mask()
b43: Convert usage of b43_radio_maskset()
b43: Remove bogus integer truncation warnings
Randy Dunlap (1):
wireless: fix for CONFIG_NL80211=n
Reinette Chatre (2):
iwlwifi: use singlethread workqueue
iwlwifi: Fix and rework Kconfig file
Roel Kluin (3):
wavelan: Test arraysize before an element of the array.
p54: misplaced parentheses
b43: Fix LO calibration txctl reg value
Senthil Balasubramanian (1):
ath9k: Add open loop control support
Sujith (21):
ath9k: Store the correct max TX power level
ath9k: Fix rd_ext EEPROM capability for AR9285
ath9k: Enable Fractional N mode
ath9k: Enable TSF Out of Range Interrupt
ath9k: Initialize AGC calibration properly
ath9k: Fix bug in disabling MIB counters
ath9k: Fix incorrect noise floor reading for 4k EEPROM
ath9k: Decrease minimum NF threshold
mac80211: Extend the rate control API with an update callback
ath9k: Program the RTC registers correctly
ath9k: Fix HW wait timeout
ath9k: Fix antenna assignment bug in TX status processing
ath9k: Initialize channel change time
ath9k: Remove a few unused capability macros
ath9k: Remove ath_txq_depth and get the queue depth directly
ath9k: Use beacon interval directly
ath9k: Remove multiple macro occurrences
ath9k: Add PER to RC debug statistics
ath9k: Fix bug in EEPROM chainmask retrieval
ath9k: Fix PCI shutdown sequence
ath9k: Add appropriate ANI values for AP mode
Vasanthakumar Thiagarajan (3):
mac80211: Make sure non-HT connection when IEEE80211_STA_TKIP_WEP_USED is set
ath9k: Fix PTK/GTK handshake timeout
ath9k: Filter out beacons from other BSS in STA mode
Wu, Fengguang (1):
iwlwifi: report correct and detailed values about requested txpower
drivers/net/wireless/Kconfig | 8 +
drivers/net/wireless/Makefile | 2 +
drivers/net/wireless/airo.c | 3 +-
drivers/net/wireless/at76c50x-usb.c | 2501 ++++++++++++++++++++
drivers/net/wireless/at76c50x-usb.h | 463 ++++
drivers/net/wireless/ath5k/base.c | 84 +-
drivers/net/wireless/ath5k/base.h | 1 +
drivers/net/wireless/ath9k/ani.c | 7 +-
drivers/net/wireless/ath9k/ath9k.h | 12 +-
drivers/net/wireless/ath9k/beacon.c | 8 +-
drivers/net/wireless/ath9k/calib.c | 64 +-
drivers/net/wireless/ath9k/calib.h | 2 +-
drivers/net/wireless/ath9k/debug.c | 12 +-
drivers/net/wireless/ath9k/debug.h | 9 +-
drivers/net/wireless/ath9k/eeprom.c | 232 ++-
drivers/net/wireless/ath9k/eeprom.h | 37 +-
drivers/net/wireless/ath9k/hw.c | 117 +-
drivers/net/wireless/ath9k/hw.h | 20 +-
drivers/net/wireless/ath9k/mac.c | 30 +-
drivers/net/wireless/ath9k/mac.h | 3 +-
drivers/net/wireless/ath9k/main.c | 72 +-
drivers/net/wireless/ath9k/pci.c | 7 +-
drivers/net/wireless/ath9k/phy.c | 19 +-
drivers/net/wireless/ath9k/phy.h | 29 +
drivers/net/wireless/ath9k/rc.c | 10 +-
drivers/net/wireless/ath9k/recv.c | 12 +-
drivers/net/wireless/ath9k/reg.h | 12 +-
drivers/net/wireless/ath9k/regd.c | 123 +-
drivers/net/wireless/ath9k/regd.h | 9 -
drivers/net/wireless/ath9k/xmit.c | 28 +-
drivers/net/wireless/b43/debugfs.c | 4 +-
drivers/net/wireless/b43/dma.c | 64 +-
drivers/net/wireless/b43/dma.h | 17 +-
drivers/net/wireless/b43/lo.c | 77 +-
drivers/net/wireless/b43/main.c | 74 +-
drivers/net/wireless/b43/phy_a.c | 111 +-
drivers/net/wireless/b43/phy_g.c | 611 ++----
drivers/net/wireless/b43/pio.c | 16 +-
drivers/net/wireless/b43/rfkill.c | 2 +-
drivers/net/wireless/b43/wa.c | 113 +-
drivers/net/wireless/hostap/hostap.h | 2 +-
drivers/net/wireless/hostap/hostap_80211.h | 2 +-
drivers/net/wireless/hostap/hostap_80211_rx.c | 88 +-
drivers/net/wireless/hostap/hostap_80211_tx.c | 51 +-
drivers/net/wireless/hostap/hostap_ap.c | 138 +-
drivers/net/wireless/hostap/hostap_ap.h | 6 +-
drivers/net/wireless/hostap/hostap_hw.c | 24 +-
drivers/net/wireless/hostap/hostap_info.c | 1 +
drivers/net/wireless/hostap/hostap_ioctl.c | 1 +
drivers/net/wireless/hostap/hostap_main.c | 38 +-
drivers/net/wireless/ipw2x00/Kconfig | 2 +-
.../net/wireless/ipw2x00}/ieee80211.h | 3 +
drivers/net/wireless/ipw2x00/ipw2100.c | 12 +-
drivers/net/wireless/ipw2x00/ipw2100.h | 8 +-
drivers/net/wireless/ipw2x00/ipw2200.c | 116 +-
drivers/net/wireless/ipw2x00/ipw2200.h | 7 +-
drivers/net/wireless/ipw2x00/libipw_geo.c | 2 +-
drivers/net/wireless/ipw2x00/libipw_module.c | 17 +-
drivers/net/wireless/ipw2x00/libipw_rx.c | 5 +-
drivers/net/wireless/ipw2x00/libipw_tx.c | 2 +-
drivers/net/wireless/ipw2x00/libipw_wx.c | 27 +-
drivers/net/wireless/iwlwifi/Kconfig | 56 +-
drivers/net/wireless/iwlwifi/Makefile | 4 +-
drivers/net/wireless/iwlwifi/iwl-3945.c | 3 +-
drivers/net/wireless/iwlwifi/iwl-agn.c | 173 +--
drivers/net/wireless/iwlwifi/iwl-core.c | 108 +-
drivers/net/wireless/iwlwifi/iwl-core.h | 14 +-
drivers/net/wireless/iwlwifi/iwl-dev.h | 4 +-
drivers/net/wireless/iwlwifi/iwl-scan.c | 68 +
drivers/net/wireless/iwlwifi/iwl-tx.c | 6 +-
drivers/net/wireless/iwlwifi/iwl3945-base.c | 437 +----
drivers/net/wireless/libertas/defs.h | 1 +
drivers/net/wireless/libertas/if_sdio.c | 20 +-
drivers/net/wireless/orinoco/fw.c | 49 +-
drivers/net/wireless/orinoco/hermes_dld.c | 99 +-
drivers/net/wireless/orinoco/hermes_dld.h | 12 +-
drivers/net/wireless/p54/p54common.c | 4 +-
drivers/net/wireless/rt2x00/rt2400pci.c | 3 -
drivers/net/wireless/rt2x00/rt2400pci.h | 4 +-
drivers/net/wireless/rt2x00/rt2500pci.c | 3 -
drivers/net/wireless/rt2x00/rt2500pci.h | 4 +-
drivers/net/wireless/rt2x00/rt2500usb.c | 3 -
drivers/net/wireless/rt2x00/rt2500usb.h | 4 +-
drivers/net/wireless/rt2x00/rt2x00debug.c | 10 +-
drivers/net/wireless/rt2x00/rt61pci.c | 3 -
drivers/net/wireless/rt2x00/rt61pci.h | 4 +-
drivers/net/wireless/rt2x00/rt73usb.c | 19 +-
drivers/net/wireless/rt2x00/rt73usb.h | 4 +-
drivers/net/wireless/wavelan.c | 3 +-
drivers/net/wireless/zd1211rw/zd_mac.c | 6 +-
include/linux/nl80211.h | 5 +
include/net/cfg80211.h | 31 +-
include/net/mac80211.h | 26 +-
include/net/wireless.h | 17 +-
net/mac80211/Makefile | 1 +
net/mac80211/agg-rx.c | 6 +-
net/mac80211/agg-tx.c | 191 +-
net/mac80211/cfg.c | 49 +-
net/mac80211/debugfs_netdev.c | 48 +-
net/mac80211/ht.c | 19 +-
net/mac80211/ibss.c | 905 +++++++
net/mac80211/ieee80211_i.h | 140 +-
net/mac80211/iface.c | 77 +-
net/mac80211/key.c | 2 +-
net/mac80211/main.c | 24 +-
net/mac80211/mlme.c | 1665 ++++----------
net/mac80211/rate.h | 12 +
net/mac80211/rx.c | 37 +-
net/mac80211/scan.c | 62 +-
net/mac80211/spectmgmt.c | 26 +-
net/mac80211/sta_info.c | 15 +-
net/mac80211/sta_info.h | 5 +-
net/mac80211/tx.c | 29 +-
net/mac80211/util.c | 254 ++-
net/mac80211/wext.c | 262 +--
net/mac80211/wme.c | 161 +--
net/mac80211/wme.h | 6 -
net/wireless/core.c | 103 +-
net/wireless/core.h | 36 +-
net/wireless/nl80211.c | 75 +-
net/wireless/nl80211.h | 4 +
net/wireless/reg.c | 945 ++++++--
net/wireless/reg.h | 36 +-
net/wireless/scan.c | 64 +-
net/wireless/sysfs.c | 9 +-
net/wireless/wext-compat.c | 97 +
126 files changed, 8007 insertions(+), 4142 deletions(-)
create mode 100644 drivers/net/wireless/at76c50x-usb.c
create mode 100644 drivers/net/wireless/at76c50x-usb.h
rename {include/net => drivers/net/wireless/ipw2x00}/ieee80211.h (99%)
create mode 100644 net/mac80211/ibss.c
Omnibus patch is available here:
http://www.kernel.org/pub/linux/kernel/people/linville/wireless-next-2.6-2009-02-27.patch.bz2
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
next reply other threads:[~2009-02-27 20:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-27 20:41 John W. Linville [this message]
2009-02-28 23:50 ` pull request: wireless-next-2.6 2009-02-27 David Miller
2009-03-01 6:12 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090227204110.GJ3687@tuxdriver.com \
--to=linville@tuxdriver.com \
--cc=davem@davemloft.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).