From: Jouni Malinen <jouni.malinen@atheros.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH] ath9k: Clean up setkey operations
Date: Tue, 3 Mar 2009 13:11:53 +0200 [thread overview]
Message-ID: <20090303111153.GA17684@jm.kir.nu> (raw)
There is no need to use ath_keyset() wrapper for
ath9k_hw_set_keycache_entry() calls. In addition, improve the comments
describing the key setting operations.
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
---
drivers/net/wireless/ath9k/main.c | 42 ++++++++++++++------------------------
1 file changed, 16 insertions(+), 26 deletions(-)
--- wireless-testing.orig/drivers/net/wireless/ath9k/main.c 2009-03-03 13:08:14.000000000 +0200
+++ wireless-testing/drivers/net/wireless/ath9k/main.c 2009-03-03 13:08:18.000000000 +0200
@@ -636,17 +636,6 @@ static u32 ath_get_extchanmode(struct at
return chanmode;
}
-static int ath_keyset(struct ath_softc *sc, u16 keyix,
- struct ath9k_keyval *hk, const u8 mac[ETH_ALEN])
-{
- bool status;
-
- status = ath9k_hw_set_keycache_entry(sc->sc_ah,
- keyix, hk, mac);
-
- return status != false;
-}
-
static int ath_setkey_tkip(struct ath_softc *sc, u16 keyix, const u8 *key,
struct ath9k_keyval *hk, const u8 *addr,
bool authenticator)
@@ -658,7 +647,11 @@ static int ath_setkey_tkip(struct ath_so
key_rxmic = key + NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY;
if (addr == NULL) {
- /* Group key installation */
+ /*
+ * Group key installation - only two key cache entries are used
+ * regardless of splitmic capability since group key is only
+ * used either for TX or RX.
+ */
if (authenticator) {
memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic));
memcpy(hk->kv_txmic, key_txmic, sizeof(hk->kv_mic));
@@ -666,24 +659,21 @@ static int ath_setkey_tkip(struct ath_so
memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
memcpy(hk->kv_txmic, key_rxmic, sizeof(hk->kv_mic));
}
- return ath_keyset(sc, keyix, hk, addr);
+ return ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, addr);
}
if (!sc->splitmic) {
- /*
- * data key goes at first index,
- * the hal handles the MIC keys at index+64.
- */
+ /* TX and RX keys share the same key cache entry. */
memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
memcpy(hk->kv_txmic, key_txmic, sizeof(hk->kv_txmic));
- return ath_keyset(sc, keyix, hk, addr);
+ return ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, addr);
}
- /*
- * TX key goes at first index, RX key at +32.
- * The hal handles the MIC keys at index+64.
- */
+
+ /* Separate key cache entries for TX and RX */
+
+ /* TX key goes at first index, RX key at +32. */
memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic));
- if (!ath_keyset(sc, keyix, hk, NULL)) {
- /* Txmic entry failed. No need to proceed further */
+ if (!ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, NULL)) {
+ /* TX MIC entry failed. No need to proceed further */
DPRINTF(sc, ATH_DBG_KEYCACHE,
"Setting TX MIC Key Failed\n");
return 0;
@@ -691,7 +681,7 @@ static int ath_setkey_tkip(struct ath_so
memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
/* XXX delete tx key on failure? */
- return ath_keyset(sc, keyix + 32, hk, addr);
+ return ath9k_hw_set_keycache_entry(sc->sc_ah, keyix + 32, hk, addr);
}
static int ath_reserve_key_cache_slot_tkip(struct ath_softc *sc)
@@ -838,7 +828,7 @@ static int ath_key_config(struct ath_sof
ret = ath_setkey_tkip(sc, idx, key->key, &hk, mac,
vif->type == NL80211_IFTYPE_AP);
else
- ret = ath_keyset(sc, idx, &hk, mac);
+ ret = ath9k_hw_set_keycache_entry(sc->sc_ah, idx, &hk, mac);
if (!ret)
return -EIO;
--
Jouni Malinen PGP id EFC895FA
reply other threads:[~2009-03-03 11:12 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090303111153.GA17684@jm.kir.nu \
--to=jouni.malinen@atheros.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).