[PATCH 05/15] ath9k: Configure RX filter for multi-BSSID broadcast

[Jouni Malinen <jouni.malinen@atheros.com>]

Allow RX filter to pass through all broadcast/multicast frames (i.e.,
no BSSID filtering) if virtual interfaces are used. Software filtering
will be used in this case to drop broadcast/multicast frames for
foreign BSSIDs.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

---
 drivers/net/wireless/ath9k/mac.h  |    1 +
 drivers/net/wireless/ath9k/recv.c |    8 ++++++++
 2 files changed, 9 insertions(+)

--- wireless-testing.orig/drivers/net/wireless/ath9k/recv.c	2009-03-03 18:30:47.000000000 +0200
+++ wireless-testing/drivers/net/wireless/ath9k/recv.c	2009-03-03 18:30:59.000000000 +0200
@@ -407,6 +407,14 @@ u32 ath_calcrxfilter(struct ath_softc *s
 	if (sc->sc_ah->opmode == NL80211_IFTYPE_AP)
 		rfilt |= ATH9K_RX_FILTER_PSPOLL;
 
+	if (sc->sec_wiphy) {
+		/* TODO: only needed if more than one BSSID is in use in
+		 * station/adhoc mode */
+		/* TODO: for older chips, may need to add ATH9K_RX_FILTER_PROM
+		 */
+		rfilt |= ATH9K_RX_FILTER_MCAST_BCAST_ALL;
+	}
+
 	return rfilt;
 
 #undef RX_FILTER_PRESERVE
--- wireless-testing.orig/drivers/net/wireless/ath9k/mac.h	2009-03-02 22:17:55.000000000 +0200
+++ wireless-testing/drivers/net/wireless/ath9k/mac.h	2009-03-03 18:30:59.000000000 +0200
@@ -570,6 +570,7 @@ enum ath9k_rx_filter {
 	ATH9K_RX_FILTER_MYBEACON = 0x00000200,
 	ATH9K_RX_FILTER_PSPOLL = 0x00004000,
 	ATH9K_RX_FILTER_PHYRADAR = 0x00002000,
+	ATH9K_RX_FILTER_MCAST_BCAST_ALL = 0x00008000,
 };
 
 #define ATH9K_RATESERIES_RTS_CTS  0x0001

-- 

-- 
Jouni Malinen                                            PGP id EFC895FA