[PATCH] p54: fix SoftLED compile dependencies

[Christian Lamparter <chunkeey@web.de>]

This patch fixes a compile problem when the MAC80211_LEDS
triggers are enabled but not LED class itself. 
(which is sort of pointless, but anyway...)

Signed-off-by: Christian Lamparter <chunkeey@web.de>
---
mb, thank you for the tips!

Randy Dunlap can you please give this patch a try?

John, do you know where the patch form 
Geert Uytterhoeven <geert@linux-m68k.org> went?
---
diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig
index 0e344ac..ee1aaca 100644
--- a/drivers/net/wireless/p54/Kconfig
+++ b/drivers/net/wireless/p54/Kconfig
@@ -1,9 +1,10 @@
 config P54_COMMON
 	tristate "Softmac Prism54 support"
-	depends on MAC80211 && WLAN_80211 && FW_LOADER && EXPERIMENTAL
+	depends on MAC80211 && WLAN_80211 && EXPERIMENTAL
+	select FW_LOADER
 	---help---
-	  This is common code for isl38xx based cards.
-	  This module does nothing by itself - the USB/PCI frontends
+	  This is common code for isl38xx/stlc45xx based modules.
+	  This module does nothing by itself - the USB/PCI/SPI frontends
 	  also need to be enabled in order to support any devices.
 
 	  These devices require softmac firmware which can be found at
@@ -17,31 +18,6 @@ config P54_USB
 	select CRC32
 	---help---
 	  This driver is for USB isl38xx based wireless cards.
-	  These are USB based adapters found in devices such as:
-
-	  3COM 3CRWE254G72
-	  SMC 2862W-G
-	  Accton 802.11g WN4501 USB
-	  Siemens Gigaset USB
-	  Netgear WG121
-	  Netgear WG111
-	  Medion 40900, Roper Europe
-	  Shuttle PN15, Airvast WM168g, IOGear GWU513
-	  Linksys WUSB54G
-	  Linksys WUSB54G Portable
-	  DLink DWL-G120 Spinnaker
-	  DLink DWL-G122
-	  Belkin F5D7050 ver 1000
-	  Cohiba Proto board
-	  SMC 2862W-G version 2
-	  U.S. Robotics U5 802.11g Adapter
-	  FUJITSU E-5400 USB D1700
-	  Sagem XG703A
-	  DLink DWL-G120 Cohiba
-	  Spinnaker Proto board
-	  Linksys WUSB54AG
-	  Inventel UR054G
-	  Spinnaker DUT
 
 	  These devices require softmac firmware which can be found at
 	  http://prism54.org/
@@ -71,3 +47,8 @@ config P54_SPI
 	  Nokia's N800/N810 Portable Internet Tablet.
 
 	  If you choose to build a module, it'll be called p54spi.
+
+config P54_LEDS
+	bool
+	depends on P54_COMMON && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = P54_COMMON)
+	default y
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 0a98983..0c1b057 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -21,9 +21,9 @@
 #include <linux/etherdevice.h>
 
 #include <net/mac80211.h>
-#ifdef CONFIG_MAC80211_LEDS
+#ifdef CONFIG_P54_LEDS
 #include <linux/leds.h>
-#endif /* CONFIG_MAC80211_LEDS */
+#endif /* CONFIG_P54_LEDS */
 
 #include "p54.h"
 #include "p54common.h"
@@ -2420,7 +2420,7 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
 	return 0;
 }
 
-#ifdef CONFIG_MAC80211_LEDS
+#ifdef CONFIG_P54_LEDS
 static void p54_led_brightness_set(struct led_classdev *led_dev,
 				   enum led_brightness brightness)
 {
@@ -2508,7 +2508,7 @@ static void p54_unregister_leds(struct ieee80211_hw *dev)
 	if (priv->assoc_led.registered)
 		led_classdev_unregister(&priv->assoc_led.led_dev);
 }
-#endif /* CONFIG_MAC80211_LEDS */
+#endif /* CONFIG_P54_LEDS */
 
 static const struct ieee80211_ops p54_ops = {
 	.tx			= p54_tx,
@@ -2592,11 +2592,11 @@ int p54_register_common(struct ieee80211_hw *dev, struct device *pdev)
 		return err;
 	}
 
-	#ifdef CONFIG_MAC80211_LEDS
+#ifdef CONFIG_P54_LEDS
 	err = p54_init_leds(dev);
 	if (err)
 		return err;
-	#endif /* CONFIG_MAC80211_LEDS */
+#endif /* CONFIG_P54_LEDS */
 
 	dev_info(pdev, "is registered as '%s'\n", wiphy_name(dev->wiphy));
 	return 0;
@@ -2610,9 +2610,9 @@ void p54_free_common(struct ieee80211_hw *dev)
 	kfree(priv->output_limit);
 	kfree(priv->curve_data);
 
-	#ifdef CONFIG_MAC80211_LEDS
+#ifdef CONFIG_P54_LEDS
 	p54_unregister_leds(dev);
-	#endif /* CONFIG_MAC80211_LEDS */
+#endif /* CONFIG_P54_LEDS */
 }
 EXPORT_SYMBOL_GPL(p54_free_common);