* [PATCH 5/5] ar9170: update Makefile, Kconfig and MAINTAINERS @ 2009-03-21 22:11 Christian Lamparter 2009-03-23 14:29 ` Johannes Berg 0 siblings, 1 reply; 6+ messages in thread From: Christian Lamparter @ 2009-03-21 22:11 UTC (permalink / raw) To: linux-wireless; +Cc: John W. Linville, Luis R. Rodriguez This patch update all necessary Makefile and Kconfig files. Now you can then enable ar9170 in the kernel configuration under: Device Drivers ---> [*] Network device support ---> Wireless LAN ---> [*] Wireless LAN (IEEE 802.11) <M> Atheros AR9170 support <M> Atheros AR9170 USB support Signed-off-by: Christian Lamparter <chunkeey@web.de> --- John, This is the last patch of this series. As far as I can _test_, this driver is ready for wireless-testing. I hope you agree, with me. I'll look into Alina's issue, once I've received more information. Regards, Chr --- diff --git a/MAINTAINERS b/MAINTAINERS index 1ba59d8..f0b1c45 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -765,6 +765,14 @@ L: linux-wireless@vger.kernel.org L: ath9k-devel@lists.ath9k.org S: Supported +ATHEROS AR9170 WIRELESS DRIVER +P: Christian Lamparter +M: chunkeey@web.de +L: linux-wireless@vger.kernel.org +W: http://wireless.kernel.org/en/users/Drivers/ar9170 +S: Maintained +F: drivers/net/wireless/ar9170/ + ATI_REMOTE2 DRIVER P: Ville Syrjala M: syrjala@sci.fi diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 612fffe..8a08235 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -485,6 +485,7 @@ config MWL8K source "drivers/net/wireless/p54/Kconfig" source "drivers/net/wireless/ath5k/Kconfig" source "drivers/net/wireless/ath9k/Kconfig" +source "drivers/net/wireless/ar9170/Kconfig" source "drivers/net/wireless/ipw2x00/Kconfig" source "drivers/net/wireless/iwlwifi/Kconfig" source "drivers/net/wireless/hostap/Kconfig" diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index d780487..5e7c9ac 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -57,5 +57,6 @@ obj-$(CONFIG_P54_COMMON) += p54/ obj-$(CONFIG_ATH5K) += ath5k/ obj-$(CONFIG_ATH9K) += ath9k/ +obj-$(CONFIG_AR9170_COMMON) += ar9170/ obj-$(CONFIG_MAC80211_HWSIM) += mac80211_hwsim.o diff --git a/drivers/net/wireless/ar9170/Kconfig b/drivers/net/wireless/ar9170/Kconfig new file mode 100644 index 0000000..f661187 --- /dev/null +++ b/drivers/net/wireless/ar9170/Kconfig @@ -0,0 +1,28 @@ +config AR9170_COMMON + tristate "Atheros AR9170 support" + depends on WLAN_80211 && MAC80211 && EXPERIMENTAL + help + This is common code for AR9170 based devices. + This module does nothing by itself - the USB/(SPI) frontends + also need to be enabled in order to support any devices. + + Say Y if you have the hardware, or M to build a module called + ar9170common. + +config AR9170_USB + tristate "Atheros AR9170 USB support" + depends on AR9170_COMMON && USB + select FW_LOADER + help + This is a driver for the Atheros "otus" 802.11n USB devices. + + These devices require additional firmware (2 files). + For now, these files can be downloaded from here: + http://wireless.kernel.org/en/users/Drivers/ar9170 + + If you choose to build a module, it'll be called ar9170usb. + +config AR9170_LEDS + bool + depends on AR9170_COMMON && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = AR9170_COMMON) + default y diff --git a/drivers/net/wireless/ar9170/Makefile b/drivers/net/wireless/ar9170/Makefile new file mode 100644 index 0000000..3f0e468 --- /dev/null +++ b/drivers/net/wireless/ar9170/Makefile @@ -0,0 +1,5 @@ +ar9170common-objs += main.o cmd.o mac.o phy.o led.o +ar9170usb-objs += usb.o + +obj-$(CONFIG_AR9170_COMMON) += ar9170common.o +obj-$(CONFIG_AR9170_USB) += ar9170usb.o ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 5/5] ar9170: update Makefile, Kconfig and MAINTAINERS 2009-03-21 22:11 [PATCH 5/5] ar9170: update Makefile, Kconfig and MAINTAINERS Christian Lamparter @ 2009-03-23 14:29 ` Johannes Berg 2009-03-24 0:26 ` Christian Lamparter 0 siblings, 1 reply; 6+ messages in thread From: Johannes Berg @ 2009-03-23 14:29 UTC (permalink / raw) To: Christian Lamparter; +Cc: linux-wireless, John W. Linville, Luis R. Rodriguez [-- Attachment #1: Type: text/plain, Size: 1758 bytes --] On Sat, 2009-03-21 at 23:11 +0100, Christian Lamparter wrote: > +config AR9170_COMMON > + tristate "Atheros AR9170 support" > + depends on WLAN_80211 && MAC80211 && EXPERIMENTAL > + help > + This is common code for AR9170 based devices. > + This module does nothing by itself - the USB/(SPI) frontends > + also need to be enabled in order to support any devices. > + > + Say Y if you have the hardware, or M to build a module called > + ar9170common. > + > +config AR9170_USB > + tristate "Atheros AR9170 USB support" > + depends on AR9170_COMMON && USB > + select FW_LOADER > + help > + This is a driver for the Atheros "otus" 802.11n USB devices. > + > + These devices require additional firmware (2 files). > + For now, these files can be downloaded from here: > + http://wireless.kernel.org/en/users/Drivers/ar9170 > + > + If you choose to build a module, it'll be called ar9170usb. > + > +config AR9170_LEDS > + bool > + depends on AR9170_COMMON && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = AR9170_COMMON) > + default y > diff --git a/drivers/net/wireless/ar9170/Makefile b/drivers/net/wireless/ar9170/Makefile > new file mode 100644 > index 0000000..3f0e468 > --- /dev/null > +++ b/drivers/net/wireless/ar9170/Makefile > @@ -0,0 +1,5 @@ > +ar9170common-objs += main.o cmd.o mac.o phy.o led.o > +ar9170usb-objs += usb.o > + > +obj-$(CONFIG_AR9170_COMMON) += ar9170common.o > +obj-$(CONFIG_AR9170_USB) += ar9170usb.o I think it would make sense to link them into the same module as long as we don't have a second user of the common code. I actually doubt we will see a second user of the common code at all, even if it is in theory possible with the hardware design. johannes [-- Attachment #2: This is a digitally signed message part --] [-- Type: application/pgp-signature, Size: 836 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 5/5] ar9170: update Makefile, Kconfig and MAINTAINERS 2009-03-23 14:29 ` Johannes Berg @ 2009-03-24 0:26 ` Christian Lamparter 2009-03-23 23:35 ` Luis R. Rodriguez 2009-03-24 7:41 ` Johannes Berg 0 siblings, 2 replies; 6+ messages in thread From: Christian Lamparter @ 2009-03-24 0:26 UTC (permalink / raw) To: Johannes Berg; +Cc: linux-wireless, John W. Linville, Luis R. Rodriguez On Monday 23 March 2009 15:29:11 Johannes Berg wrote: > > I think it would make sense to link them into the same module as long as > we don't have a second user of the common code. I actually doubt we will > see a second user of the common code at all, even if it is in theory > possible with the hardware design. Shh, there's a secret plan, see ar9170/main.c /* * BIG FAT TODO: * * By the looks of things: these devices share a lot of things like * EEPROM layout/design and PHY code with other Atheros WIFI products. * So this driver/library will eventually become ath9k code... or vice versa ;-) */ And the ath5k<->ath9k merge could provide some "helper" function for this driver as well... (wishful thinking, but anyway...) Meanwhile, what about a config option that can be enabled to integrate everything into the front-end module (ar9170usb)? ( However, I don't think this config solution will stand a chance ;-) and we all come to the same "all-in-one works best" conclusion. ) --- diff --git a/drivers/net/wireless/ar9170/Kconfig b/drivers/net/wireless/ar9170/Kconfig index f661187..5272940 100644 --- a/drivers/net/wireless/ar9170/Kconfig +++ b/drivers/net/wireless/ar9170/Kconfig @@ -22,6 +22,16 @@ config AR9170_USB If you choose to build a module, it'll be called ar9170usb. +config AR9170_INTEGRATE_COMMON + bool "Integrate common code into front-end modules" + depends on AR9170_COMMON + help + If this option is set, the common code will be + integrated into the front-end modules instead + of being linked into a seperate module. + + If unsure, say N. + config AR9170_LEDS bool depends on AR9170_COMMON && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = AR9170_COMMON) diff --git a/drivers/net/wireless/ar9170/Makefile b/drivers/net/wireless/ar9170/Makefile index 59b174d..868a520 100644 --- a/drivers/net/wireless/ar9170/Makefile +++ b/drivers/net/wireless/ar9170/Makefile @@ -1,5 +1,15 @@ +ifdef CONFIG_AR9170_INTEGRATE_COMMON + +ar9170usb-objs += usb.o main.o cmd.o mac.o phy.o led.o + +obj-$(CONFIG_AR9170_USB) += ar9170usb.o + +else + ar9170common-objs += main.o cmd.o mac.o phy.o led.o ar9170usb-objs += usb.o obj-$(CONFIG_AR9170_COMMON) += ar9170common.o obj-$(CONFIG_AR9170_USB) += ar9170usb.o + +endif diff --git a/drivers/net/wireless/ar9170/main.c b/drivers/net/wireless/ar9170/main.c index f8c2357..ec03df6 100644 --- a/drivers/net/wireless/ar9170/main.c +++ b/drivers/net/wireless/ar9170/main.c @@ -57,8 +57,10 @@ static int modparam_nohwcrypt; module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>"); +#ifndef CONFIG_AR9170_INTEGRATE_COMMON MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Atheros shared code for AR9170 wireless devices"); +#endif /* CONFIG_AR9170_INTEGRATE_COMMON */ #define RATE(_bitrate, _hw_rate, _txpidx, _flags) { \ .bitrate = (_bitrate), \ @@ -1693,6 +1695,7 @@ void ar9170_unregister(struct ar9170 *ar) } EXPORT_SYMBOL_GPL(ar9170_unregister); +#ifndef CONFIG_AR9170_INTEGRATE_COMMON static int __init ar9170_init(void) { if (modparam_nohwcrypt) @@ -1709,3 +1712,4 @@ static void __exit ar9170_exit(void) module_init(ar9170_init); module_exit(ar9170_exit); +#endif /* CONFIG_AR9170_INTEGRATE_COMMON */ ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 5/5] ar9170: update Makefile, Kconfig and MAINTAINERS 2009-03-24 0:26 ` Christian Lamparter @ 2009-03-23 23:35 ` Luis R. Rodriguez 2009-03-24 7:41 ` Johannes Berg 1 sibling, 0 replies; 6+ messages in thread From: Luis R. Rodriguez @ 2009-03-23 23:35 UTC (permalink / raw) To: Christian Lamparter Cc: Johannes Berg, linux-wireless@vger.kernel.org, John W. Linville, Luis Rodriguez On Mon, Mar 23, 2009 at 05:26:12PM -0700, Christian Lamparter wrote: > On Monday 23 March 2009 15:29:11 Johannes Berg wrote: > > > > I think it would make sense to link them into the same module as long as > > we don't have a second user of the common code. I actually doubt we will > > see a second user of the common code at all, even if it is in theory > > possible with the hardware design. > Shh, there's a secret plan, see ar9170/main.c > > /* > * BIG FAT TODO: > * > * By the looks of things: these devices share a lot of things like > * EEPROM layout/design and PHY code with other Atheros WIFI products. > * So this driver/library will eventually become ath9k code... or vice versa ;-) > */ The MACs are completely different so if there is some code sharing possible it may be difficult to find but it would certainly be welcomed! > And the ath5k<->ath9k merge could provide some "helper" function for this > driver as well... (wishful thinking, but anyway...) Yeah we'll see. > Meanwhile, what about a config option that can be enabled to > integrate everything into the front-end module (ar9170usb)? > ( However, I don't think this config solution will stand a chance ;-) > and we all come to the same "all-in-one works best" conclusion. ) Future Atheros 11n USB devices will use a different MAC and therefore expect them to be different. I am not sure if in the future we can share but I won't know for sure for a little while. Its your driver though so your call. I also just don't see where things can be immediately shared right now but do welcome the work to do so. Luis ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 5/5] ar9170: update Makefile, Kconfig and MAINTAINERS 2009-03-24 0:26 ` Christian Lamparter 2009-03-23 23:35 ` Luis R. Rodriguez @ 2009-03-24 7:41 ` Johannes Berg 2009-03-24 15:21 ` [PATCH] ar9170: single module build Christian Lamparter 1 sibling, 1 reply; 6+ messages in thread From: Johannes Berg @ 2009-03-24 7:41 UTC (permalink / raw) To: Christian Lamparter; +Cc: linux-wireless, John W. Linville, Luis R. Rodriguez [-- Attachment #1: Type: text/plain, Size: 1127 bytes --] On Tue, 2009-03-24 at 01:26 +0100, Christian Lamparter wrote: > Shh, there's a secret plan, see ar9170/main.c > > /* > * BIG FAT TODO: > * > * By the looks of things: these devices share a lot of things like > * EEPROM layout/design and PHY code with other Atheros WIFI products. > * So this driver/library will eventually become ath9k code... or vice versa ;-) > */ > > And the ath5k<->ath9k merge could provide some "helper" function for this > driver as well... (wishful thinking, but anyway...) _Very_ wishful thinking -- only very small parts of the design are really shared, the PHY stuff, which happens to be relevant to the eeprom. > Meanwhile, what about a config option that can be enabled to > integrate everything into the front-end module (ar9170usb)? > ( However, I don't think this config solution will stand a chance ;-) > and we all come to the same "all-in-one works best" conclusion. ) This seems like a pointless option. Why not just change the Kconfig file to remove the common option and link both files into one binary, removing all EXPORT_SYMBOLs? johannes [-- Attachment #2: This is a digitally signed message part --] [-- Type: application/pgp-signature, Size: 836 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] ar9170: single module build 2009-03-24 7:41 ` Johannes Berg @ 2009-03-24 15:21 ` Christian Lamparter 0 siblings, 0 replies; 6+ messages in thread From: Christian Lamparter @ 2009-03-24 15:21 UTC (permalink / raw) To: Johannes Berg; +Cc: linux-wireless, John W. Linville, Luis R. Rodriguez This patch restores all-in-one module build procedure for ar9170. Signed-off-by: Christian Lamparter <chunkeey@web.de> --- On Tuesday 24 March 2009 08:41:01 Johannes Berg wrote: > > And the ath5k<->ath9k merge could provide some "helper" function for this > > driver as well... (wishful thinking, but anyway...) > > _Very_ wishful thinking -- only very small parts of the design are > really shared, the PHY stuff, which happens to be relevant to the > eeprom. small? regd.c, eeprom.c, ani.c, calib.c, phy.c (including some register definitions) and code for LED/Bluetooth Coex?/Rfkill? that's nearly a third of ath9k. However: Agreed! Lets wait and see what Atheros' is doing/planing. > > Meanwhile, what about a config option that can be enabled to > > integrate everything into the front-end module (ar9170usb)? > > ( However, I don't think this config solution will stand a chance ;-) > > and we all come to the same "all-in-one works best" conclusion. ) > This seems like a pointless option. Why not just change the Kconfig file > to remove the common option and link both files into one binary, > removing all EXPORT_SYMBOLs? Done! --- On Tuesday 24 March 2009 00:35:22 Luis R. Rodriguez wrote: > The MACs are completely different so if there is some code sharing possible > it may be difficult to find but it would certainly be welcomed! MAC with its firmware is a zd12xx derivate, true... the PHY chips are AR9101/AR9102/AR9104, right? >Future Atheros 11n USB devices will use a different MAC and therefore expect >them to be different. I am not sure if in the future we can share but >I won't know for sure for a little while. That's really good to hear! --- diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index 5e7c9ac..50e7fba 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -57,6 +57,6 @@ obj-$(CONFIG_P54_COMMON) += p54/ obj-$(CONFIG_ATH5K) += ath5k/ obj-$(CONFIG_ATH9K) += ath9k/ -obj-$(CONFIG_AR9170_COMMON) += ar9170/ +obj-$(CONFIG_AR9170_USB) += ar9170/ obj-$(CONFIG_MAC80211_HWSIM) += mac80211_hwsim.o diff --git a/drivers/net/wireless/ar9170/Kconfig b/drivers/net/wireless/ar9170/Kconfig index f661187..de4281f 100644 --- a/drivers/net/wireless/ar9170/Kconfig +++ b/drivers/net/wireless/ar9170/Kconfig @@ -1,17 +1,6 @@ -config AR9170_COMMON - tristate "Atheros AR9170 support" - depends on WLAN_80211 && MAC80211 && EXPERIMENTAL - help - This is common code for AR9170 based devices. - This module does nothing by itself - the USB/(SPI) frontends - also need to be enabled in order to support any devices. - - Say Y if you have the hardware, or M to build a module called - ar9170common. - config AR9170_USB - tristate "Atheros AR9170 USB support" - depends on AR9170_COMMON && USB + tristate "Atheros AR9170 802.11n USB support" + depends on USB && MAC80211 && WLAN_80211 && EXPERIMENTAL select FW_LOADER help This is a driver for the Atheros "otus" 802.11n USB devices. @@ -24,5 +13,5 @@ config AR9170_USB config AR9170_LEDS bool - depends on AR9170_COMMON && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = AR9170_COMMON) + depends on AR9170_USB && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = AR9170_USB) default y diff --git a/drivers/net/wireless/ar9170/Makefile b/drivers/net/wireless/ar9170/Makefile index 59b174d..8d91c7e 100644 --- a/drivers/net/wireless/ar9170/Makefile +++ b/drivers/net/wireless/ar9170/Makefile @@ -1,5 +1,3 @@ -ar9170common-objs += main.o cmd.o mac.o phy.o led.o -ar9170usb-objs += usb.o +ar9170usb-objs := usb.o main.o cmd.o mac.o phy.o led.o -obj-$(CONFIG_AR9170_COMMON) += ar9170common.o obj-$(CONFIG_AR9170_USB) += ar9170usb.o diff --git a/drivers/net/wireless/ar9170/cmd.c b/drivers/net/wireless/ar9170/cmd.c index fd5625c..f57a620 100644 --- a/drivers/net/wireless/ar9170/cmd.c +++ b/drivers/net/wireless/ar9170/cmd.c @@ -127,4 +127,3 @@ int ar9170_echo_test(struct ar9170 *ar, u32 v) return 0; } -EXPORT_SYMBOL_GPL(ar9170_echo_test); diff --git a/drivers/net/wireless/ar9170/main.c b/drivers/net/wireless/ar9170/main.c index f8c2357..5996ff9 100644 --- a/drivers/net/wireless/ar9170/main.c +++ b/drivers/net/wireless/ar9170/main.c @@ -37,14 +37,6 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -/* - * BIG FAT TODO: - * - * By the looks of things: these devices share a lot of things like - * EEPROM layout/design and PHY code with other Atheros WIFI products. - * So this driver/library will eventually become ath9k code... or vice versa ;-) - */ - #include <linux/init.h> #include <linux/module.h> #include <linux/etherdevice.h> @@ -56,9 +48,6 @@ static int modparam_nohwcrypt; module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); -MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>"); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Atheros shared code for AR9170 wireless devices"); #define RATE(_bitrate, _hw_rate, _txpidx, _flags) { \ .bitrate = (_bitrate), \ @@ -247,7 +236,6 @@ void ar9170_handle_tx_status(struct ar9170 *ar, struct sk_buff *skb, skb_pull(skb, sizeof(struct ar9170_tx_control)); ieee80211_tx_status_irqsafe(ar->hw, skb); } -EXPORT_SYMBOL_GPL(ar9170_handle_tx_status); static struct sk_buff *ar9170_find_skb_in_queue(struct ar9170 *ar, const u8 *mac, @@ -630,13 +618,6 @@ static void ar9170_handle_mpdu(struct ar9170 *ar, u8 *buf, int len) ieee80211_rx_irqsafe(ar->hw, skb, &status); } -/* - * TODO: - * It looks like AR9170 supports more than just the USB transport interface. - * Unfortunately, there is no available information what parts of the - * precendent and following code fragments is device specific and what not. - * For now, everything stays here, until some SPI chips pop up. - */ void ar9170_rx(struct ar9170 *ar, struct sk_buff *skb) { unsigned int i, tlen, resplen; @@ -694,7 +675,6 @@ void ar9170_rx(struct ar9170 *ar, struct sk_buff *skb) printk(KERN_ERR "%s: buffer remains!\n", wiphy_name(ar->hw->wiphy)); } -EXPORT_SYMBOL_GPL(ar9170_rx); #define AR9170_FILL_QUEUE(queue, ai_fs, cwmin, cwmax, _txop) \ do { \ @@ -1582,7 +1562,6 @@ void *ar9170_alloc(size_t priv_size) return ar; } -EXPORT_SYMBOL_GPL(ar9170_alloc); static int ar9170_read_eeprom(struct ar9170 *ar) { @@ -1680,7 +1659,6 @@ err_unreg: err_out: return err; } -EXPORT_SYMBOL_GPL(ar9170_register); void ar9170_unregister(struct ar9170 *ar) { @@ -1691,21 +1669,3 @@ void ar9170_unregister(struct ar9170 *ar) ieee80211_unregister_hw(ar->hw); mutex_destroy(&ar->mutex); } -EXPORT_SYMBOL_GPL(ar9170_unregister); - -static int __init ar9170_init(void) -{ - if (modparam_nohwcrypt) - printk(KERN_INFO "ar9170: cryptographic acceleration " - "disabled.\n"); - - return 0; -} - -static void __exit ar9170_exit(void) -{ - -} - -module_init(ar9170_init); -module_exit(ar9170_exit); diff --git a/drivers/net/wireless/ar9170/usb.c b/drivers/net/wireless/ar9170/usb.c index ede511e..ad29684 100644 --- a/drivers/net/wireless/ar9170/usb.c +++ b/drivers/net/wireless/ar9170/usb.c @@ -47,9 +47,10 @@ #include "hw.h" #include "usb.h" +MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>"); MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>"); MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("USB Driver for Atheros AR9170 based devices"); +MODULE_DESCRIPTION("Atheros AR9170 802.11n USB wireless"); MODULE_FIRMWARE("ar9170-1.fw"); MODULE_FIRMWARE("ar9170-2.fw"); ^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2009-03-24 15:22 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2009-03-21 22:11 [PATCH 5/5] ar9170: update Makefile, Kconfig and MAINTAINERS Christian Lamparter 2009-03-23 14:29 ` Johannes Berg 2009-03-24 0:26 ` Christian Lamparter 2009-03-23 23:35 ` Luis R. Rodriguez 2009-03-24 7:41 ` Johannes Berg 2009-03-24 15:21 ` [PATCH] ar9170: single module build Christian Lamparter
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).