From: Christian Lamparter <chunkeey@web.de>
To: linux-wireless@vger.kernel.org
Cc: "John W. Linville" <linville@tuxdriver.com>
Subject: [PATCH 1/3] p54: clean up p54.h's struct p54_common
Date: Wed, 25 Mar 2009 03:11:58 +0100 [thread overview]
Message-ID: <200903250311.58614.chunkeey@web.de> (raw)
This patch rearrange and regroups most elements in p54_common.
Signed-off-by: Christian Lamparter <chunkeey@web.de>
---
this is testing material... especially 3/3!
---
diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h
index ecf8b6e..04d95a1 100644
--- a/drivers/net/wireless/p54/p54.h
+++ b/drivers/net/wireless/p54/p54.h
@@ -133,55 +133,72 @@ struct p54_led_dev {
struct p54_common {
struct ieee80211_hw *hw;
- u32 rx_start;
- u32 rx_end;
- struct sk_buff_head tx_queue;
void (*tx)(struct ieee80211_hw *dev, struct sk_buff *skb);
int (*open)(struct ieee80211_hw *dev);
void (*stop)(struct ieee80211_hw *dev);
- int mode;
+ struct sk_buff_head tx_queue;
+ struct mutex conf_mutex;
+
+ /* memory management (as seen by the firmware) */
+ u32 rx_start;
+ u32 rx_end;
u16 rx_mtu;
u8 headroom;
u8 tailroom;
- struct mutex conf_mutex;
- u8 mac_addr[ETH_ALEN];
- u8 bssid[ETH_ALEN];
+
+ /* firmware/hardware info */
+ unsigned int tx_hdr_len;
+ unsigned int fw_var;
+ unsigned int fw_interface;
+ u8 version;
+
+ /* (e)DCF / QOS state */
+ bool use_short_slot;
+ struct ieee80211_tx_queue_stats tx_stats[8];
+ struct p54_edcf_queue_param qos_params[8];
+
+ /* Radio data */
+ u16 rxhw;
u8 rx_diversity_mask;
u8 tx_diversity_mask;
+ unsigned int output_power;
+ int noise;
+ /* calibration, output power limit and rssi<->dBm conversation data */
struct pda_iq_autocal_entry *iq_autocal;
unsigned int iq_autocal_len;
- struct p54_cal_database *output_limit;
struct p54_cal_database *curve_data;
+ struct p54_cal_database *output_limit;
struct p54_rssi_linear_approximation rssical_db[IEEE80211_NUM_BANDS];
+
+ /* BBP/MAC state */
+ u8 mac_addr[ETH_ALEN];
+ u8 bssid[ETH_ALEN];
+ u16 wakeup_timer;
unsigned int filter_flags;
- bool use_short_slot;
- u16 rxhw;
- u8 version;
- unsigned int tx_hdr_len;
- unsigned int fw_var;
- unsigned int fw_interface;
- unsigned int output_power;
- u32 tsf_low32;
- u32 tsf_high32;
+ int mode;
+ u32 tsf_low32, tsf_high32;
u32 basic_rate_mask;
- u16 wakeup_timer;
u16 aid;
- struct ieee80211_tx_queue_stats tx_stats[8];
- struct p54_edcf_queue_param qos_params[8];
- struct ieee80211_low_level_stats stats;
- struct delayed_work work;
struct sk_buff *cached_beacon;
- int noise;
- void *eeprom;
- struct completion eeprom_comp;
+
+ /* cryptographic engine information */
u8 privacy_caps;
u8 rx_keycache_size;
+
/* LED management */
#ifdef CONFIG_P54_LEDS
struct p54_led_dev assoc_led;
struct p54_led_dev tx_led;
#endif /* CONFIG_P54_LEDS */
u16 softled_state; /* bit field of glowing LEDs */
+
+ /* statistics */
+ struct ieee80211_low_level_stats stats;
+ struct delayed_work work;
+
+ /* eeprom handling */
+ void *eeprom;
+ struct completion eeprom_comp;
};
int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb);
next reply other threads:[~2009-03-25 2:09 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-25 2:11 Christian Lamparter [this message]
2009-03-25 3:24 ` [PATCH 1/3] p54: clean up p54.h's struct p54_common Larry Finger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200903250311.58614.chunkeey@web.de \
--to=chunkeey@web.de \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).