Re: [PATCH 2/2 v2] p54spi: fix p54spi_upload_firmware

[Christian Lamparter <chunkeey@web.de>]

On Wednesday 25 March 2009 13:50:44 Max Filippov wrote:
> >> Sorry, I haven't been used to checkpatch.
> > But your PATCH 1/2 sailed through without any complains. ;-)
> Mere coincidence (:
> 
> > BTW: does p54spi really work now?
> I haven't tested your patch yet, but with the one that I sent it does
> work in IBSS mode.
> My aim is to wind it up in mesh mode. This doesn't work, it cannot
> establish peer link.
> I'm going to investigate it. Does mesh mode work on conventional pci/usb p54?

hmm, yes... at least with wireless-testing from yesterday. (beaconing works too)

[ 9862.704138] mesh: running mesh housekeeping
[ 9906.580204] phy3: Allocated STA 00:14:a5:45:33:ff
[ 9906.581566] phy3: Inserted STA 00:14:a5:45:33:ff
[ 9906.581581] Mesh plink: starting establishment with 00:14:a5:45:33:ff
[ 9906.634055] Mesh plink (peer, state, llid, plid, event): 00:14:a5:45:33:ff 1 28312 0 1
[ 9906.636888] Mesh plink (peer, state, llid, plid, event): 00:14:a5:45:33:ff 2 28312 55519 4
[ 9906.636895] Mesh plink with 00:14:a5:45:33:ff ESTABLISHED

64 bytes from 10.0.0.2: icmp_seq=449 ttl=64 time=1.81 ms
64 bytes from 10.0.0.2: icmp_seq=450 ttl=64 time=1.41 ms
64 bytes from 10.0.0.2: icmp_seq=451 ttl=64 time=3.52 ms
...

both peers have a p54 (one is pci, the other one usb)... I'll see if I can
get my old ath5k back to verify that it works with other devices as well.

Regards,
	Chr