Re: [PATCH 2/2 v2] p54spi: fix p54spi_upload_firmware

[Christian Lamparter <chunkeey@web.de>]

On Wednesday 25 March 2009 14:42:58 Christian Lamparter wrote:
> On Wednesday 25 March 2009 13:50:44 Max Filippov wrote:
> > >> Sorry, I haven't been used to checkpatch.
> > > But your PATCH 1/2 sailed through without any complains. ;-)
> > Mere coincidence (:
> > 
> > > BTW: does p54spi really work now?
> > I haven't tested your patch yet, but with the one that I sent it does
> > work in IBSS mode.
> > My aim is to wind it up in mesh mode. This doesn't work, it cannot
> > establish peer link.
> > I'm going to investigate it. Does mesh mode work on conventional pci/usb p54?
> 
> hmm, yes... at least with wireless-testing from yesterday. (beaconing works too)
> 
> [ 9862.704138] mesh: running mesh housekeeping
> [ 9906.580204] phy3: Allocated STA 00:14:a5:45:33:ff
> [ 9906.581566] phy3: Inserted STA 00:14:a5:45:33:ff
> [ 9906.581581] Mesh plink: starting establishment with 00:14:a5:45:33:ff
> [ 9906.634055] Mesh plink (peer, state, llid, plid, event): 00:14:a5:45:33:ff 1 28312 0 1
> [ 9906.636888] Mesh plink (peer, state, llid, plid, event): 00:14:a5:45:33:ff 2 28312 55519 4
> [ 9906.636895] Mesh plink with 00:14:a5:45:33:ff ESTABLISHED
> 
> 64 bytes from 10.0.0.2: icmp_seq=449 ttl=64 time=1.81 ms
> 64 bytes from 10.0.0.2: icmp_seq=450 ttl=64 time=1.41 ms
> 64 bytes from 10.0.0.2: icmp_seq=451 ttl=64 time=3.52 ms
> ...
> 
> both peers have a p54 (one is pci, the other one usb)... I'll see if I can
> get my old ath5k back to verify that it works with other devices as well.

FYI, I just finished testing with a 5 node mesh network with various drivers
(ath5k, ar9170usb and p54 mesh network) and it looks like everything works
the way it should... ( testing was done with the current wireless-testing.git )

Is there anything else I can do, or something you want to know?

Regards,
	Chr