From: "Mark A. Haun" <haunma@keteu.org>
To: Christian Lamparter <chunkeey@web.de>
Cc: linux-wireless@vger.kernel.org
Subject: Re: p54 "device does not respond" with fullmac SMC 2802W PCI
Date: Sun, 29 Mar 2009 10:17:28 -0700 [thread overview]
Message-ID: <20090329101728.640ea69f@angwin.keteu.org> (raw)
In-Reply-To: <200903291653.04974.chunkeey@web.de>
On Sun, 29 Mar 2009 16:53:04 +0200
Christian Lamparter <chunkeey@web.de> wrote:
> On Sunday 29 March 2009 09:42:37 Mark A. Haun wrote:
> > p54pci 0000:0a:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> > p54pci 0000:0a:00.0: firmware: requesting isl3886pci
> > phy0: p54 detected a LM86 firmware
> > p54: rx_mtu reduced from 3240 to 2376
> > phy0: FW rev 2.13.12.0 - Softmac protocol 5.9
> > phy0: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES
> > phy0: device does not respond!
> > p54pci 0000:0a:00.0: PCI INT A disabled
> > p54pci: probe of 0000:0a:00.0 failed with error -16
> >
[...]
> Well, there was one report a while ago:
> http://markmail.org/message/fotvzl5ldlgfwxbo
> (I bet you've read it already)
This looks like a rev 2 card whereas mine is rev 1 (if PCI IDs are to
be trusted).
> Of course you can give ndiswrapper with the windows driver a try.
> Let me know if it works or produces the same "-16" error.
I just tried this, but I forgot it can't work because I am running
x86_64 architecture and SMC hasn't released 64-bit drivers :(
Mark
prev parent reply other threads:[~2009-03-29 17:17 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-10 2:23 p54 "device does not respond" with fullmac SMC 2802W PCI Mark A. Haun
2009-01-10 12:21 ` Christian Lamparter
2009-01-11 4:56 ` Mark A. Haun
2009-03-29 7:42 ` Mark A. Haun
2009-03-29 14:53 ` Christian Lamparter
2009-03-29 17:17 ` Mark A. Haun [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090329101728.640ea69f@angwin.keteu.org \
--to=haunma@keteu.org \
--cc=chunkeey@web.de \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).