From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from qmta09.emeryville.ca.mail.comcast.net ([76.96.30.96]:57942 "EHLO QMTA09.emeryville.ca.mail.comcast.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750976AbZC2RRb (ORCPT ); Sun, 29 Mar 2009 13:17:31 -0400 Date: Sun, 29 Mar 2009 10:17:28 -0700 From: "Mark A. Haun" To: Christian Lamparter Cc: linux-wireless@vger.kernel.org Subject: Re: p54 "device does not respond" with fullmac SMC 2802W PCI Message-ID: <20090329101728.640ea69f@angwin.keteu.org> (sfid-20090329_191735_117071_A44786A7) In-Reply-To: <200903291653.04974.chunkeey@web.de> References: <20090109182322.263db101@angwin.keteu.org> <200901101321.50077.chunkeey@web.de> <20090329004237.710775ea@angwin.keteu.org> <200903291653.04974.chunkeey@web.de> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Sender: linux-wireless-owner@vger.kernel.org List-ID: On Sun, 29 Mar 2009 16:53:04 +0200 Christian Lamparter wrote: > On Sunday 29 March 2009 09:42:37 Mark A. Haun wrote: > > p54pci 0000:0a:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > > p54pci 0000:0a:00.0: firmware: requesting isl3886pci > > phy0: p54 detected a LM86 firmware > > p54: rx_mtu reduced from 3240 to 2376 > > phy0: FW rev 2.13.12.0 - Softmac protocol 5.9 > > phy0: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES > > phy0: device does not respond! > > p54pci 0000:0a:00.0: PCI INT A disabled > > p54pci: probe of 0000:0a:00.0 failed with error -16 > > [...] > Well, there was one report a while ago: > http://markmail.org/message/fotvzl5ldlgfwxbo > (I bet you've read it already) This looks like a rev 2 card whereas mine is rev 1 (if PCI IDs are to be trusted). > Of course you can give ndiswrapper with the windows driver a try. > Let me know if it works or produces the same "-16" error. I just tried this, but I forgot it can't work because I am running x86_64 architecture and SMC hasn't released 64-bit drivers :( Mark