[patch 76/88] ath9k: implement IO serialization

[patch 76/88] ath9k: implement IO serialization

[Greg KH]

2.6.28-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Luis R. Rodriguez <lrodriguez@atheros.com>

This is a port of:
commit SHA1 6158425be398936af1fd04451f78ffad01529cb0
for 2.6.28.

All 802.11n PCI devices (Cardbus, PCI, mini-PCI) require
serialization of IO when on non-uniprocessor systems. PCI
express devices not not require this.

This should fix our only last standing open ath9k kernel.org
bugzilla bug report:

http://bugzilla.kernel.org/show_bug.cgi?id=12110

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/net/wireless/ath9k/ath9k.h |    4 ++--
 drivers/net/wireless/ath9k/core.c  |    1 +
 drivers/net/wireless/ath9k/core.h  |   33 +++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath9k/hw.c    |   19 +++++++++++++++++++
 4 files changed, 55 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath9k/ath9k.h
@@ -590,8 +590,8 @@ struct ath9k_country_entry {
 	u8 iso[3];
 };
 
-#define REG_WRITE(_ah, _reg, _val) iowrite32(_val, _ah->ah_sh + _reg)
-#define REG_READ(_ah, _reg) ioread32(_ah->ah_sh + _reg)
+#define REG_WRITE(_ah, _reg, _val) ath9k_iowrite32((_ah), (_reg), (_val))
+#define REG_READ(_ah, _reg) ath9k_ioread32((_ah), (_reg))
 
 #define SM(_v, _f)  (((_v) << _f##_S) & _f)
 #define MS(_v, _f)  (((_v) & _f) >> _f##_S)
--- a/drivers/net/wireless/ath9k/core.c
+++ b/drivers/net/wireless/ath9k/core.c
@@ -1089,6 +1089,7 @@ int ath_init(u16 devid, struct ath_softc
 	sc->sc_cachelsz = csz << 2;	/* convert to bytes */
 
 	spin_lock_init(&sc->sc_resetlock);
+	spin_lock_init(&sc->sc_serial_rw);
 
 	ah = ath9k_hw_attach(devid, sc, sc->mem, &status);
 	if (ah == NULL) {
--- a/drivers/net/wireless/ath9k/core.h
+++ b/drivers/net/wireless/ath9k/core.h
@@ -1040,6 +1040,7 @@ struct ath_softc {
 	spinlock_t sc_rxbuflock;
 	spinlock_t sc_txbuflock;
 	spinlock_t sc_resetlock;
+	spinlock_t sc_serial_rw;
 	spinlock_t node_lock;
 
 	/* LEDs */
@@ -1081,4 +1082,36 @@ void ath_get_currentCountry(struct ath_s
 	struct ath9k_country_entry *ctry);
 u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp);
 
+/*
+ * Read and write, they both share the same lock. We do this to serialize
+ * reads and writes on Atheros 802.11n PCI devices only. This is required
+ * as the FIFO on these devices can only accept sanely 2 requests. After
+ * that the device goes bananas. Serializing the reads/writes prevents this
+ * from happening.
+ */
+
+static inline void ath9k_iowrite32(struct ath_hal *ah, u32 reg_offset, u32 val)
+{
+	if (ah->ah_config.serialize_regmode == SER_REG_MODE_ON) {
+		unsigned long flags;
+		spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
+		iowrite32(val, ah->ah_sc->mem + reg_offset);
+		spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
+	} else
+		iowrite32(val, ah->ah_sc->mem + reg_offset);
+}
+
+static inline unsigned int ath9k_ioread32(struct ath_hal *ah, u32 reg_offset)
+{
+	u32 val;
+	if (ah->ah_config.serialize_regmode == SER_REG_MODE_ON) {
+		unsigned long flags;
+		spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
+		val = ioread32(ah->ah_sc->mem + reg_offset);
+		spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
+	} else
+		val = ioread32(ah->ah_sc->mem + reg_offset);
+	return val;
+}
+
 #endif /* CORE_H */
--- a/drivers/net/wireless/ath9k/hw.c
+++ b/drivers/net/wireless/ath9k/hw.c
@@ -346,6 +346,25 @@ static void ath9k_hw_set_defaults(struct
 	}
 
 	ah->ah_config.intr_mitigation = 0;
+
+	/*
+	 * We need this for PCI devices only (Cardbus, PCI, miniPCI)
+	 * _and_ if on non-uniprocessor systems (Multiprocessor/HT).
+	 * This means we use it for all AR5416 devices, and the few
+	 * minor PCI AR9280 devices out there.
+	 *
+	 * Serialization is required because these devices do not handle
+	 * well the case of two concurrent reads/writes due to the latency
+	 * involved. During one read/write another read/write can be issued
+	 * on another CPU while the previous read/write may still be working
+	 * on our hardware, if we hit this case the hardware poops in a loop.
+	 * We prevent this by serializing reads and writes.
+	 *
+	 * This issue is not present on PCI-Express devices or pre-AR5416
+	 * devices (legacy, 802.11abg).
+	 */
+       if (num_possible_cpus() > 1)
+               ah->ah_config.serialize_regmode = SER_REG_MODE_AUTO;
 }
 
 static void ath9k_hw_override_ini(struct ath_hal *ah,

[patch 77/88] ath9k: AR9280 PCI devices must serialize IO as well

[Greg KH]

2.6.28-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Luis R. Rodriguez <lrodriguez@atheros.com>

This is a port of:
commit SHA1 5ec905a8df3fa877566ba98298433fbfb3d688cc
for 2.6.28

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
---
 drivers/net/wireless/ath9k/hw.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/ath9k/hw.c
+++ b/drivers/net/wireless/ath9k/hw.c
@@ -3311,7 +3311,8 @@ static struct ath_hal *ath9k_hw_do_attac
 	}
 
 	if (ah->ah_config.serialize_regmode == SER_REG_MODE_AUTO) {
-		if (ah->ah_macVersion == AR_SREV_VERSION_5416_PCI) {
+		if (ah->ah_macVersion == AR_SREV_VERSION_5416_PCI ||
+		    (AR_SREV_9280(ah) && !ah->ah_isPciExpress)) {
 			ah->ah_config.serialize_regmode =
 				SER_REG_MODE_ON;
 		} else {