From: <trencan@centrum.cz>
To: <mcgrof@gmail.com>
Cc: <linux-wireless@vger.kernel.org>, <ic.felix@gmail.com>
Subject: Re: rt2x00 - wireless compat - can not load compiled rt61pci
Date: Mon, 18 May 2009 20:07:24 +0200 [thread overview]
Message-ID: <200905182007.16782@centrum.cz> (raw)
In-Reply-To: <43e72e890905171426xf9f483dh9d2477cebd4eab47@mail.gmail.com>
Hello,
I used "search updates" in depmod.d and it works, perfect.
Thanks.
______________________________________________________________
> Od: mcgrof@gmail.com
> Komu: trencan <trencan@centrum.cz>
> CC: linux-wireless@vger.kernel.org, Felix Bitterli <ic.felix@gmail.com>
> Datum: 17.05.2009 23:27
> Předmět: Re: rt2x00 - wireless compat - can not load compiled rt61pci
>
>On Sun, May 17, 2009 at 3:50 AM, trencan <trencan@centrum.cz> wrote:
>> Hello,
>>
>> I use latest Mandriva distribution 2009.1 with kernel 2.6.29.1-desktop-4mnb.
>> I have rt2561 wifi card in my PC. I would like to switch my wifi card to AP
>> or Ad-hoc mode. My distribution's rt61pci module doesn't support these
>> modes. So I have downloaded compat-wireless-2.6.30-rc4.tar.bz2
>> <http://www.orbit-lab.org/kernel/compat-wireless-2.6-stable/v2.6.30/compat-wireless-2.6.30-rc4.tar.bz2>.
>>
>> I ran:
>> make
>> make install
>> make unload
>>
>> Everything fine. But then "modprobe rt61pci" loaded my distribution's
>> rt61pci module and not the compiled one. Distribution's one is in folder:
>>
>> [root@trencancan compat-wireless-2.6.30-rc4]# ls -la
>> /lib/modules/2.6.29.1-desktop-4mnb/kernel/drivers/net/wireless/rt2x00/rt61pci.ko.gz
>> -rw-r--r-- 1 root root 11279 2009-04-21 01:13
>> /lib/modules/2.6.29.1-desktop-4mnb/kernel/drivers/net/wireless/rt2x00/rt61pci.ko.gz
>>
>> Compiled one is in folder:
>> [root@trencancan compat-wireless-2.6.30-rc4]# ls -la
>> /lib/modules/2.6.29.1-desktop-4mnb/updates/drivers/net/wireless/rt2x00/rt61pci.ko.gz
>> -rw-r--r-- 1 root root 123843 2009-05-16 23:21
>> /lib/modules/2.6.29.1-desktop-4mnb/updates/drivers/net/wireless/rt2x00/rt61pci.ko.gz
>>
>>
>> But after I type "modprobe rt61pci", then:
>> [root@trencancan compat-wireless-2.6.30-rc4]# modinfo rt61pci
>> filename:
>> /lib/modules/2.6.29.1-desktop-4mnb/kernel/drivers/net/wireless/rt2x00/rt61pci.ko.gz
>> license: GPL
>> firmware: rt2661.bin
>> firmware: rt2561s.bin
>> firmware: rt2561.bin
>> description: Ralink RT61 PCI & PCMCIA Wireless LAN driver.
>> version: 2.2.3
>> author: http://rt2x00.serialmonkey.com
>> srcversion: E8C0D3A4B7F36984638CEDF
>> alias: pci:v00001814d00000401sv*sd*bc*sc*i*
>> alias: pci:v00001814d00000302sv*sd*bc*sc*i*
>> alias: pci:v00001814d00000301sv*sd*bc*sc*i*
>> depends: rt2x00lib,rt2x00pci,eeprom_93cx6,crc-itu-t
>> vermagic: 2.6.29.1-desktop-4mnb SMP mod_unload modversions 686
>> parm: nohwcrypt:Disable hardware encryption. (bool)
>>
>>
>> So you can see that Distribution's module (in kernel folder) was loaded. I
>> think root cause of problem is that run of command: "depmod -ae" finds first
>> rt61pci in kernel's folder and then next instance in updates folder is not
>> considered. If I look at output of depmod command:
>>
>> [root@trencancan compat-wireless-2.6.30-rc4]# grep -i rt61pci
>> /lib/modules/2.6.29.1-desktop-4mnb/modules.dep
>> kernel/drivers/net/wireless/rt2x00/rt61pci.ko.gz: kernel/lib/crc-itu-t.ko.gz
>> kernel/drivers/net/wireless/rt2x00/rt2x00pci.ko.gz
>> kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko.gz
>> kernel/net/rfkill/rfkill.ko.gz kernel/drivers/leds/led-class.ko.gz
>> kernel/net/mac80211/mac80211.ko.gz kernel/net/wireless/cfg80211.ko.gz
>> kernel/drivers/misc/eeprom/eeprom_93cx6.ko.gz
>>
>> So you may see that rt61pci in
>> /lib/modules/2.6.29.1-desktop-4mnb/updates/drivers/net/wireless/rt2x00/
>> folder is not considered.
>>
>> Please, how can I workaround this? Or what do I wrong? One solution can be
>> to install all compat-wireless modules into kernel folder instead of updates
>> folder. But then distribution's ones will be overwritten and un-installation
>> will be impossible.
>
>Mandriva may not look for updates/ dir by default. For Ubuntu I still
>see this respected.
>
>For example on ubuntu I see:
>
>mcgrof@tesla $ cat /etc/depmod.d/ubuntu.conf
>search updates ubuntu built-in
>
>Can you check your /etc/depmod.d/ directory or /etc/depmod.conf file?
>
> Luis
>--
>To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2009-05-18 18:27 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-17 10:50 rt2x00 - wireless compat - can not load compiled rt61pci trencan
2009-05-17 21:26 ` Luis R. Rodriguez
2009-05-18 18:07 ` trencan [this message]
2009-05-18 22:45 ` Luis R. Rodriguez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200905182007.16782@centrum.cz \
--to=trencan@centrum.cz \
--cc=ic.felix@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=mcgrof@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).