From: Christian Lamparter <chunkeey@web.de>
To: linux-wireless@vger.kernel.org
Cc: "John W. Linville" <linville@tuxdriver.com>
Subject: [PATCH] ar9170usb: more minor fixes
Date: Thu, 28 May 2009 17:04:27 +0200 [thread overview]
Message-ID: <200905281704.28362.chunkeey@web.de> (raw)
This patch contains a few more mostly random fixes for the USB front-end.
1. handle irq command response, instead of printing it to the console.
2. remove fixed FIXME.
(real fix: "ar9170usb: reset device on resume". )
3. some more one-liner.
- get rid of a useless "return;"
- add a few branch prediction hints in hot-paths
etc.
Signed-off-by: Christian Lamparter <chunkeey@web.de>
---
diff --git a/drivers/net/wireless/ath/ar9170/ar9170.h b/drivers/net/wireless/ath/ar9170/ar9170.h
index 396b240..4c4b08f 100644
--- a/drivers/net/wireless/ath/ar9170/ar9170.h
+++ b/drivers/net/wireless/ath/ar9170/ar9170.h
@@ -207,6 +207,7 @@ void ar9170_rx(struct ar9170 *ar, struct sk_buff *skb);
void ar9170_unregister(struct ar9170 *ar);
void ar9170_handle_tx_status(struct ar9170 *ar, struct sk_buff *skb,
bool update_statistics, u16 tx_status);
+void ar9170_handle_command_response(struct ar9170 *ar, void *buf, u32 len);
/* MAC */
int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index 63528f1..b889fda 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -370,8 +370,7 @@ static void ar9170_tx_status_janitor(struct work_struct *work)
msecs_to_jiffies(100));
}
-static void ar9170_handle_command_response(struct ar9170 *ar,
- void *buf, u32 len)
+void ar9170_handle_command_response(struct ar9170 *ar, void *buf, u32 len)
{
struct ar9170_cmd_response *cmd = (void *) buf;
diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c
index d7c13c0..a54d49b 100644
--- a/drivers/net/wireless/ath/ar9170/usb.c
+++ b/drivers/net/wireless/ath/ar9170/usb.c
@@ -93,7 +93,7 @@ static void ar9170_usb_tx_urb_complete_free(struct urb *urb)
struct ar9170_usb *aru = (struct ar9170_usb *)
usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
- if (!aru) {
+ if (unlikely(!aru)) {
dev_kfree_skb_irq(skb);
return ;
}
@@ -126,8 +126,8 @@ static void ar9170_usb_irq_completed(struct urb *urb)
goto resubmit;
}
- print_hex_dump_bytes("ar9170 irq: ", DUMP_PREFIX_OFFSET,
- urb->transfer_buffer, urb->actual_length);
+ ar9170_handle_command_response(&aru->common, urb->transfer_buffer,
+ urb->actual_length);
resubmit:
usb_anchor_urb(urb, &aru->rx_submitted);
@@ -177,16 +177,15 @@ resubmit:
usb_anchor_urb(urb, &aru->rx_submitted);
err = usb_submit_urb(urb, GFP_ATOMIC);
- if (err) {
+ if (unlikely(err)) {
usb_unanchor_urb(urb);
- dev_kfree_skb_irq(skb);
+ goto free;
}
return ;
free:
dev_kfree_skb_irq(skb);
- return;
}
static int ar9170_usb_prep_rx_urb(struct ar9170_usb *aru,
@@ -337,7 +336,7 @@ static int ar9170_usb_exec_cmd(struct ar9170 *ar, enum ar9170_cmd cmd,
usb_anchor_urb(urb, &aru->tx_submitted);
err = usb_submit_urb(urb, GFP_ATOMIC);
- if (err) {
+ if (unlikely(err)) {
usb_unanchor_urb(urb);
usb_free_urb(urb);
goto err_unbuf;
@@ -418,7 +417,7 @@ static void ar9170_usb_callback_cmd(struct ar9170 *ar, u32 len , void *buffer)
unsigned long flags;
u32 in, out;
- if (!buffer)
+ if (unlikely(!buffer))
return ;
in = le32_to_cpup((__le32 *)buffer);
@@ -691,7 +690,7 @@ static int ar9170_usb_probe(struct usb_interface *intf,
#ifdef CONFIG_PM
udev->reset_resume = 1;
-#endif
+#endif /* CONFIG_PM */
err = ar9170_usb_reset(aru);
if (err)
goto err_freehw;
@@ -776,11 +775,6 @@ static int ar9170_resume(struct usb_interface *intf)
usb_unpoison_anchored_urbs(&aru->rx_submitted);
usb_unpoison_anchored_urbs(&aru->tx_submitted);
- /*
- * FIXME: firmware upload will fail on resume.
- * but this is better than a hang!
- */
-
err = ar9170_usb_init_device(aru);
if (err)
goto err_unrx;
reply other threads:[~2009-05-28 15:04 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200905281704.28362.chunkeey@web.de \
--to=chunkeey@web.de \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).