Re: [ath9k-devel] Pending ath9k bugs

[Vasanthakumar Thiagarajan <vasanth@atheros.com>]

 
> BUG_ON in rc.c when using 11n. This could be caused by an incorrect
> assumption in ath9k that the rc priv is correctly for the target rate.
> The issue may be seen when trying to associate and changing between
> legacy and HT rates on SMP systems when mac80211 passes frames on
> different queues due to multiqueue support. If that is indeed the
> reason for the issue we will probably need locking on the rc priv or
> simply to revamp it. I'll send a patch for now to downgrade the BUG_ON
> but we do need a proper fix for this, it just needs more careful
> review.

I agree that rc priv needs proper locking, but I dont think this
particular issue is related to some race in rc priv. As I already
mentioned in one of the mails related to this problem, the root
cause can be a failure in channel set, have we confirmed that?.
I tried to reproduce this on my setup but no luck.

> 
> While on the topic I should mention a welcomed change would be to
> actually revamp ath9k RC to fix it to correctly report MCS rates to
> mac80211. 

This needs complete rewrite of ath9k rate control alg.


Vasanth