* 2.6.31-rc2: Possible regression in rt61pci driver
@ 2009-07-13 8:27 Chris Clayton
2009-07-14 11:04 ` Chris Clayton
0 siblings, 1 reply; 22+ messages in thread
From: Chris Clayton @ 2009-07-13 8:27 UTC (permalink / raw)
To: linux-wireless; +Cc: LKML
[-- Attachment #1: Type: text/plain, Size: 1900 bytes --]
Hi,
Please cc me on any reply because I'm not subscribed.
I've been testing 2.6.31 development kernels on my laptop and find
that I can induce a complete lock-up more or less at will. To do so,
all I have to do is generate some network traffic on my wireless LAN
(I've been using wget to transfer a file from another box on my LAN)
and then wait. If I run netstat repeatedly while waiting, I see a TCP
connection to port 21 on another box on my LAN in a TIME_WAIT state.
It seems that when that connection disappears, the laptop locks up
hard and I can only recover by powering off and on again. I think the
problem is related to the rt61pci driver because I haven't been able
to induce the lock-up when using a wireless card that's supported by
the ath5k driver. I started bisecting, but a couple of times I arrived
at points where although the kernel builds OK, I have no network
connectivity. I guessed at good, but the bisection process finished at
a change that can't be the culprit (because it's for a different
architecture).
I attach the best diagnostics I can think of at this point in time
(but am more than happy to provide any others that are requested). It
includes the output from dmesg from a boot that locked up and the
syslog journal from that boot; a description of the wireless card from
lspci -v and the output from netstat that shows the connection I think
is involved. As I say, feel free to ask for any other diagnostics that
will help track the problem down.
I have confirmed that the problem is still present in a kernel built
after a 'git pull' this morning, although it was somewhere around the
time that -rc2 was released that I first came across it. I cannot
induce the problem with 2.6.30.1.
Thanks
Chris
--
No, Sir; there is nothing which has yet been contrived by man, by
which so much happiness is produced as by a good tavern or inn -
Doctor Samuel Johnson
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 30345 bytes --]
Linux version 2.6.31-rc2-bi (chris@laptop) (gcc version 4.3.4 20090621 (prerelease) (GCC) ) #233 PREEMPT Mon Jul 13 07:17:51 BST 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffe2800 (usable)
BIOS-e820: 000000001ffe2800 - 0000000020000000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
DMI 2.3 present.
last_pfn = 0x1ffe2 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FE0000000 write-back
1 base 0FEDA0000 mask FFFFE0000 write-through
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
PAT not supported by CPU.
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-000000001ffe2000
0000000000 - 0000400000 page 4k
0000400000 - 001fc00000 page 2M
001fc00000 - 001ffe2000 page 4k
kernel direct mapping tables up to 1ffe2000 @ 7000-c000
ACPI: RSDP 000fde50 00014 (v00 DELL )
ACPI: RSDT 000fde64 00028 (v01 DELL CPi R 27D20811 ASL 00000061)
ACPI: FACP 000fde90 00074 (v01 DELL CPi R 27D20811 ASL 00000061)
ACPI: DSDT fffe4000 0317A (v01 INT430 SYSFexxx 00001001 MSFT 0100000E)
ACPI: FACS 1ffff800 00040
511MB LOWMEM available.
mapped low ram: 0 - 1ffe2000
low ram: 0 - 1ffe2000
node 0 low ram: 00000000 - 1ffe2000
node 0 bootmap 00001000 - 00005000
(6 early reservations) ==> bootmem [0000000000 - 001ffe2000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0001000000 - 00013ebfc4] TEXT DATA BSS ==> [0001000000 - 00013ebfc4]
#2 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#3 [00013ec000 - 00013f2198] BRK ==> [00013ec000 - 00013f2198]
#4 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#5 [0000001000 - 0000005000] BOOTMAP ==> [0000001000 - 0000005000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x0001ffe2
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0001ffe2
On node 0 totalpages: 130945
free_area_init_node: node 0, pgdat c136da20, node_mem_map c13f3000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 992 pages used for memmap
Normal zone: 125954 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
Local APIC disabled by BIOS -- you can enable it with "lapic"
APIC: disable apic facility
nr_irqs_gsi: 16
Allocating PCI resources starting at 20000000 (gap: 20000000:deda0000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129921
Kernel command line: root=/dev/hda7 ro noirda
PID hash table entries: 2048 (order: 11, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Memory: 515172k/524168k available (2558k kernel code, 8560k reserved, 990k data, 272k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffa4000 - 0xfffff000 ( 364 kB)
vmalloc : 0xe07e2000 - 0xfffa2000 ( 503 MB)
lowmem : 0xc0000000 - 0xdffe2000 ( 511 MB)
.init : 0xc1379000 - 0xc13bd000 ( 272 kB)
.data : 0xc127f8e9 - 0xc13773a8 ( 990 kB)
.text : 0xc1000000 - 0xc127f8e9 (2558 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:288
CPU 0 irqstacks, hard=c1370000 soft=c1371000
Fast TSC calibration using PIT
Detected 996.590 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 1993.18 BogoMIPS (lpj=3986360)
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
mce: CPU supports 5 MCE banks
Disabling lock debugging due to kernel taint
CPU: Mobile Intel(R) Pentium(R) III CPU - M 1000MHz stepping 04
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090521
ACPI: setting ELCR to 0200 (from 0800)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S5)
ACPI: Using PIC for interrupt routing
ACPI: Power Resource [PADA] (on)
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f]
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
pci 0000:00:1f.1: reg 20 io port: [0xbfa0-0xbfaf]
pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd8ff]
pci 0000:00:1f.5: reg 14 io port: [0xdc80-0xdcbf]
pci 0000:00:1f.6: reg 10 io port: [0xd400-0xd4ff]
pci 0000:00:1f.6: reg 14 io port: [0xdc00-0xdc7f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff]
pci 0000:01:00.0: reg 14 io port: [0xc000-0xc0ff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xfcff0000-0xfcffffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfdffffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff]
pci 0000:02:00.0: reg 10 io port: [0xec80-0xecff]
pci 0000:02:00.0: reg 14 32bit mmio: [0xf8fffc00-0xf8fffc7f]
pci 0000:02:00.0: reg 30 32bit mmio: [0xf9000000-0xf901ffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:02:01.0: supports D1 D2
pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:02:01.1: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:02:01.1: supports D1 D2
pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.1: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xe000-0xffff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xf4000000-0xfbffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:02: io resource (0x800-0x805) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
pnp 00:02: io resource (0x808-0x80f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
pnp 00:03: io resource (0x806-0x807) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
pnp 00:03: io resource (0x810-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
pnp 00:03: io resource (0x860-0x87f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
pnp 00:04: io resource (0xf000-0xf0fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: io resource (0xf100-0xf1fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: io resource (0xf200-0xf2fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: io resource (0xf400-0xf4fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: io resource (0xf500-0xf5fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: io resource (0xf600-0xf6fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: io resource (0xf800-0xf8fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: io resource (0xf900-0xf9fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: io resource (0xfa00-0xfafe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: io resource (0xfc00-0xfcfe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: io resource (0xfd00-0xfdfe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: io resource (0xfe00-0xfefe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: mem resource (0xfa000000-0xfbffffff) overlaps 0000:00:1e.0 BAR 8 (0xf4000000-0xfbffffff), disabling
pnp: PnP ACPI: found 18 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9fbff could not be reserved
system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xcffff could not be reserved
system 00:00: iomem range 0xe0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved
system 00:00: iomem range 0x1fff0000-0x1fffffff has been reserved
system 00:00: iomem range 0xfeda0000-0xfedfffff has been reserved
system 00:00: iomem range 0xfff80000-0xffffffff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:03: ioport range 0x880-0x8bf has been reserved
system 00:03: ioport range 0x8c0-0x8df has been reserved
system 00:03: ioport range 0x8e0-0x8ff has been reserved
system 00:09: ioport range 0x900-0x91f has been reserved
system 00:09: ioport range 0x3f0-0x3f1 has been reserved
system 00:10: ioport range 0xbf40-0xbf5f has been reserved
system 00:10: ioport range 0xbf20-0xbf3f has been reserved
system 00:11: iomem range 0xfebffc00-0xfebfffff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xc000-0xcfff
pci 0000:00:01.0: MEM window: 0xfc000000-0xfdffffff
pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xe7ffffff
pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:01.0: IO window: 0x00e000-0x00e0ff
pci 0000:02:01.0: IO window: 0x00e400-0x00e4ff
pci 0000:02:01.0: PREFETCH window: 0x20000000-0x23ffffff
pci 0000:02:01.0: MEM window: 0xf4000000-0xf7ffffff
pci 0000:02:01.1: CardBus bridge, secondary bus 0000:07
pci 0000:02:01.1: IO window: 0x00e800-0x00e8ff
pci 0000:02:01.1: IO window: 0x00f000-0x00f0ff
pci 0000:02:01.1: PREFETCH window: 0x24000000-0x27ffffff
pci 0000:02:01.1: MEM window: 0x2c000000-0x2fffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0: IO window: 0xe000-0xffff
pci 0000:00:1e.0: MEM window: 0xf4000000-0xfbffffff
pci 0000:00:1e.0: PREFETCH window: 0x20000000-0x27ffffff
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:01.0: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:01.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
pci 0000:02:01.1: enabling device (0000 -> 0003)
pci 0000:02:01.1: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfdffffff]
pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff]
pci_bus 0000:02: resource 0 io: [0xe000-0xffff]
pci_bus 0000:02: resource 1 mem: [0xf4000000-0xfbffffff]
pci_bus 0000:02: resource 2 pref mem [0x20000000-0x27ffffff]
pci_bus 0000:02: resource 3 io: [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:03: resource 0 io: [0xe000-0xe0ff]
pci_bus 0000:03: resource 1 io: [0xe400-0xe4ff]
pci_bus 0000:03: resource 2 pref mem [0x20000000-0x23ffffff]
pci_bus 0000:03: resource 3 mem: [0xf4000000-0xf7ffffff]
pci_bus 0000:07: resource 0 io: [0xe800-0xe8ff]
pci_bus 0000:07: resource 1 io: [0xf000-0xf0ff]
pci_bus 0000:07: resource 2 pref mem [0x24000000-0x27ffffff]
pci_bus 0000:07: resource 3 mem: [0x2c000000-0x2fffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
msgmni has been set to 1006
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:00: registered as cooling_device0
Switched to NOHz mode on CPU #0
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (35 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12b
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 830M Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.1.0 20060810
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Platform driver 'serial8250' needs updating - please use dev_pm_ops
00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
serial 0000:00:1f.6: PCI INT B disabled
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x248a rev 0x02)
pci 0000:00:1f.1: enabling device (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
pci 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xbfa0-0xbfa7
ide1: BM-DMA at 0xbfa8-0xbfaf
Probing IDE interface ide0...
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
hda: SAMSUNG HM160HC, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
hdc: HL-DT-ST DVD+/-RW GSA-T11N, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
hda: max request size: 512KiB
hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
ide-cd driver 5.00
ide-cd: hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Platform driver 'i8042' needs updating - please use dev_pm_ops
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
Platform driver 'pcspkr' needs updating - please use dev_pm_ops
input: PC Speaker as /devices/platform/pcspkr/input/input3
cpuidle: using governor ladder
cpuidle: using governor menu
Advanced Linux Sound Architecture Driver Version 1.0.20.
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
Intel ICH 0000:00:1f.5: setting latency timer to 64
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Clocksource tsc unstable (delta = -290658918 ns)
intel8x0_measure_ac97_clock: measured 55205 usecs (2654 samples)
intel8x0: clocking to 48000
ALSA device list:
#0: Intel 82801CA-ICH3 with CS4205 at irq 5
TCP cubic registered
NET: Registered protocol family 15
Using IPI Shortcut mode
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 3:7.
Freeing unused kernel memory: 272k freed
EXT3 FS on hda7, internal journal
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31-rc2-bi uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Platform driver 'floppy' needs updating - please use dev_pm_ops
Floppy drive(s): fd0 is 1.44M
parport_pc 00:0f: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
FDC 0 is a post-1991 82077
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
3c59x 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
3c59x: Donald Becker and others.
0000:02:00.0: 3Com PCI 3c905C Tornado at e08eac00.
usb 1-1: new low speed USB device using uhci_hcd and address 2
NET: Registered protocol family 23
Platform driver 'smsc-ircc2' needs updating - please use dev_pm_ops
found SMC SuperIO Chip (devid=0x0e rev=01 base=0x002e): LPC47N252
smsc_ircc_present: can't get sir_base of 0x2f8
Platform driver 'smsc-ircc2' needs updating - please use dev_pm_ops
found SMC SuperIO Chip (devid=0x0e rev=01 base=0x002e): LPC47N252
smsc_ircc_present: can't get sir_base of 0x2f8
yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:00e3]
yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:01.0: TI: mfunc 0x01261222, devctl 0x64
usb 1-1: New USB device found, idVendor=046d, idProduct=c016
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: Optical USB Mouse
usb 1-1: Manufacturer: Logitech
usb 1-1: configuration #1 chosen from 1 choice
yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0418, PCI irq 11
yenta_cardbus 0000:02:01.0: Socket status: 30000020
yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xe000-0xffff: clean.
yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff
yenta_cardbus 0000:02:01.1: CardBus bridge found [1028:00e3]
yenta_cardbus 0000:02:01.1: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:02:01.1: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:01.1: TI: mfunc 0x01261222, devctl 0x64
Synaptics Touchpad, model: 1, fw: 5.7, id: 0x9b48b1, caps: 0x804793/0x0
serio: Synaptics pass-through port at isa0060/serio1/input0
yenta_cardbus 0000:02:01.1: ISA IRQ mask 0x0418, PCI irq 11
yenta_cardbus 0000:02:01.1: Socket status: 30000020
yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xe000-0xffff: clean.
yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x800-0x8ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x4ff: excluding 0x280-0x287
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input6
generic-usb 0003:046D:C016.0001: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
pci 0000:03:00.0: reg 10 32bit mmio: [0xffff8000-0xffffffff]
cfg80211: Calling CRDA to update world regulatory domain
pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1
pci 0000:07:00.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:07:00.0: PME# disabled
pci 0000:07:00.1: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:07:00.1: supports D1 D2
pci 0000:07:00.1: PME# supported from D0 D1 D2 D3hot
pci 0000:07:00.1: PME# disabled
pci 0000:07:00.2: reg 10 32bit mmio: [0x000000-0x0000ff]
pci 0000:07:00.2: supports D1 D2
pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot
pci 0000:07:00.2: PME# disabled
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci_hcd 0000:07:00.2: enabling device (0000 -> 0002)
ehci_hcd 0000:07:00.2: PCI INT C -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:07:00.2: EHCI Host Controller
ehci_hcd 0000:07:00.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:07:00.2: irq 11, io mem 0x2c002000
ehci_hcd 0000:07:00.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31-rc2-bi ehci_hcd
usb usb2: SerialNumber: 0000:07:00.2
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
rt61pci 0000:03:00.0: enabling device (0000 -> 0002)
rt61pci 0000:03:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
rt61pci 0000:03:00.0: setting latency timer to 64
phy0 -> rt61pci_validate_eeprom: EEPROM recovery - NIC: 0xff80
phy0 -> rt61pci_validate_eeprom: EEPROM recovery - Led: 0xe0ff
phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 0301, rf: 0003, rev: 0002561c.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x800-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x4ff: excluding 0x280-0x287
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
phy0: Selected rate control algorithm 'minstrel'
Registered led device: rt61pci-phy0::radio
Registered led device: rt61pci-phy0::assoc
phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561s.bin'.
rt61pci 0000:03:00.0: firmware: requesting rt2561s.bin
phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
NET: Registered protocol family 17
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
wlan0: authenticate with AP 00:1f:33:80:09:44
wlan0: authenticated
wlan0: associate with AP 00:1f:33:80:09:44
wlan0: RX AssocResp from 00:1f:33:80:09:44 (capab=0x431 status=0 aid=1)
wlan0: associated
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
cfg80211: Calling CRDA for country: GB
cfg80211: Regulatory domain changed to country: GB
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
microcode: CPU0 sig=0x6b4, pf=0x20, revision=0x2
platform microcode: firmware: requesting intel-ucode/06-0b-04
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Microcode Update Driver: v2.00 removed.
IBM TrackPoint firmware: 0x0b, buttons: 2/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
Adding 1048568k swap on /swapfile. Priority:-1 extents:316 across:4686700k
wlan0: deauthenticated (Reason: 1)
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
wlan0: direct probe to AP 00:1f:33:80:09:44 try 1
wlan0: direct probe to AP 00:1f:33:80:09:44 try 2
wlan0 direct probe responded
wlan0: authenticate with AP 00:1f:33:80:09:44
wlan0: authenticated
wlan0: associate with AP 00:1f:33:80:09:44
wlan0: RX ReassocResp from 00:1f:33:80:09:44 (capab=0x431 status=0 aid=1)
wlan0: associated
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (8190 buckets, 32760 max)
NET: Unregistered protocol family 23
parport_pc 00:0f: disabled
3c59x 0000:02:00.0: PCI INT A disabled
wlan0: deauthenticated (Reason: 1)
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
wlan0: direct probe to AP 00:1f:33:80:09:44 try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:1f:33:80:09:44
wlan0: authenticated
wlan0: associate with AP 00:1f:33:80:09:44
wlan0: RX ReassocResp from 00:1f:33:80:09:44 (capab=0x431 status=0 aid=1)
wlan0: associated
pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0
agpgart-intel 0000:00:00.0: AGP 2.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V2 device into 2x mode
pci 0000:01:00.0: putting AGP V2 device into 2x mode
resource map sanity check conflict: 0xfcff0000 0xfd06ffff 0xfcff0000 0xfcffffff 0000:01:00.0
------------[ cut here ]------------
WARNING: at arch/x86/mm/ioremap.c:205 __ioremap_caller+0x2aa/0x2c0()
Hardware name: Latitude C610
Info: mapping multiple BARs. Your kernel is fine.
Modules linked in: radeon xt_state iptable_filter ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables x_tables af_packet arc4 ecb rt61pci crc_itu_t ehci_hcd rt2x00pci rt2x00lib led_class input_polldev mac80211 cfg80211 eeprom_93cx6 usbhid yenta_socket rsrc_nonstatic psmouse pcmcia_core floppy uhci_hcd usbcore [last unloaded: 3c59x]
Pid: 1227, comm: X Tainted: G M 2.6.31-rc2-bi #233
Call Trace:
[<c101993a>] ? __ioremap_caller+0x2aa/0x2c0
[<c101993a>] ? __ioremap_caller+0x2aa/0x2c0
[<c102546f>] ? warn_slowpath_common+0x6f/0xd0
[<c101993a>] ? __ioremap_caller+0x2aa/0x2c0
[<c102551b>] ? warn_slowpath_fmt+0x2b/0x30
[<c101993a>] ? __ioremap_caller+0x2aa/0x2c0
[<c105605b>] ? generic_file_buffered_write+0xfb/0x330
[<c1019a64>] ? ioremap_nocache+0x14/0x20
[<c117a855>] ? drm_addmap_core+0x655/0x790
[<c117a855>] ? drm_addmap_core+0x655/0x790
[<c1056798>] ? __generic_file_aio_write_nolock+0x248/0x540
[<c117a9d7>] ? drm_addmap_ioctl+0x47/0x90
[<c117bb88>] ? drm_ioctl+0x138/0x320
[<c117a990>] ? drm_addmap_ioctl+0x0/0x90
[<c10ca8a0>] ? ext3_file_write+0x30/0xc0
[<c107e8ed>] ? do_sync_write+0xcd/0x110
[<c108ba3f>] ? vfs_ioctl+0x7f/0x90
[<c108bbb3>] ? do_vfs_ioctl+0x73/0x630
[<c107f418>] ? vfs_write+0xf8/0x130
[<c108c1ad>] ? sys_ioctl+0x3d/0x70
[<c1002e34>] ? sysenter_do_call+0x12/0x26
---[ end trace 250e88637fe242af ]---
[drm] Setting GART location based on old memory map
[drm] Loading R100 Microcode
[drm] writeback test succeeded in 1 usecs
[-- Attachment #3: syslog --]
[-- Type: application/octet-stream, Size: 87725 bytes --]
Jul 13 08:39:39 laptop syslogd 1.5.0: restart.
Jul 13 08:39:39 laptop kernel: klogd 1.5.0, log source = /proc/kmsg started.
Jul 13 08:39:39 laptop kernel: Inspecting /boot/System.map-2.6.31-rc2-bi
Jul 13 08:39:39 laptop kernel: Cannot find map file.
Jul 13 08:39:39 laptop kernel: Loaded 19376 symbols from 28 modules.
Jul 13 08:39:39 laptop kernel: Linux version 2.6.31-rc2-bi (chris@laptop) (gcc version 4.3.4 20090621 (prerelease) (GCC) ) #233 PREEMPT Mon Jul 13 07:17:51 BST 2009
Jul 13 08:39:40 laptop kernel: KERNEL supported cpus:
Jul 13 08:39:40 laptop kernel: Intel GenuineIntel
Jul 13 08:39:40 laptop kernel: AMD AuthenticAMD
Jul 13 08:39:40 laptop kernel: NSC Geode by NSC
Jul 13 08:39:40 laptop kernel: Cyrix CyrixInstead
Jul 13 08:39:41 laptop kernel: Centaur CentaurHauls
Jul 13 08:39:41 laptop kernel: Transmeta GenuineTMx86
Jul 13 08:39:41 laptop kernel: Transmeta TransmetaCPU
Jul 13 08:39:42 laptop kernel: UMC UMC UMC UMC
Jul 13 08:39:42 laptop kernel: BIOS-provided physical RAM map:
Jul 13 08:39:42 laptop kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Jul 13 08:39:42 laptop kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Jul 13 08:39:42 laptop kernel: BIOS-e820: 0000000000100000 - 000000001ffe2800 (usable)
Jul 13 08:39:42 laptop kernel: BIOS-e820: 000000001ffe2800 - 0000000020000000 (reserved)
Jul 13 08:39:42 laptop kernel: BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
Jul 13 08:39:42 laptop xfs[1135]: ignoring font path element /usr/X11/lib/X11/fonts/Speedo/ (unreadable)
Jul 13 08:39:42 laptop kernel: BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
Jul 13 08:39:42 laptop xfs[1135]: ignoring font path element /usr/X11/lib/X11/fonts/CID/ (unreadable)
Jul 13 08:39:42 laptop kernel: DMI 2.3 present.
Jul 13 08:39:42 laptop kernel: last_pfn = 0x1ffe2 max_arch_pfn = 0x100000
Jul 13 08:39:42 laptop kernel: MTRR default type: uncachable
Jul 13 08:39:42 laptop xfs[1135]: ignoring font path element /usr/X11/lib/X11/fonts/local/ (unreadable)
Jul 13 08:39:42 laptop kernel: MTRR fixed ranges enabled:
Jul 13 08:39:42 laptop xfs[1135]: ignoring font path element /usr/X11/lib/X11/fonts/encodings (unreadable)
Jul 13 08:39:43 laptop kernel: 00000-9FFFF write-back
Jul 13 08:39:43 laptop xfs[1135]: ignoring font path element /usr/X11/lib/X11/fonts/encodings/large (unreadable)
Jul 13 08:39:43 laptop kernel: A0000-BFFFF uncachable
Jul 13 08:39:43 laptop xfs[1135]: ignoring font path element /usr/X11/lib/X11/fonts/util (unreadable)
Jul 13 08:39:43 laptop kernel: C0000-CFFFF write-protect
Jul 13 08:39:43 laptop xfs[1135]: ignoring font path element /usr/share/fonts/libwmf (unreadable)
Jul 13 08:39:43 laptop kernel: D0000-EFFFF uncachable
Jul 13 08:39:43 laptop xfs[1135]: ignoring font path element /usr/share/fonts/freefont (unreadable)
Jul 13 08:39:43 laptop kernel: F0000-FFFFF write-protect
Jul 13 08:39:43 laptop xfs[1135]: ignoring font path element /usr/share/fonts/dejavu-ttf (unreadable)
Jul 13 08:39:43 laptop kernel: MTRR variable ranges enabled:
Jul 13 08:39:43 laptop kernel: 0 base 000000000 mask FE0000000 write-back
Jul 13 08:39:43 laptop kernel: 1 base 0FEDA0000 mask FFFFE0000 write-through
Jul 13 08:39:43 laptop kernel: 2 disabled
Jul 13 08:39:43 laptop kernel: 3 disabled
Jul 13 08:39:43 laptop kernel: 4 disabled
Jul 13 08:39:43 laptop kernel: 5 disabled
Jul 13 08:39:43 laptop kernel: 6 disabled
Jul 13 08:39:43 laptop kernel: 7 disabled
Jul 13 08:39:43 laptop kernel: PAT not supported by CPU.
Jul 13 08:39:43 laptop kernel: initial memory mapped : 0 - 01800000
Jul 13 08:39:43 laptop kernel: init_memory_mapping: 0000000000000000-000000001ffe2000
Jul 13 08:39:43 laptop kernel: 0000000000 - 0000400000 page 4k
Jul 13 08:39:43 laptop kernel: 0000400000 - 001fc00000 page 2M
Jul 13 08:39:43 laptop kernel: 001fc00000 - 001ffe2000 page 4k
Jul 13 08:39:43 laptop kernel: kernel direct mapping tables up to 1ffe2000 @ 7000-c000
Jul 13 08:39:43 laptop kernel: ACPI: RSDP 000fde50 00014 (v00 DELL )
Jul 13 08:39:43 laptop kernel: ACPI: RSDT 000fde64 00028 (v01 DELL CPi R 27D20811 ASL 00000061)
Jul 13 08:39:43 laptop kernel: ACPI: FACP 000fde90 00074 (v01 DELL CPi R 27D20811 ASL 00000061)
Jul 13 08:39:43 laptop kernel: ACPI: DSDT fffe4000 0317A (v01 INT430 SYSFexxx 00001001 MSFT 0100000E)
Jul 13 08:39:43 laptop kernel: ACPI: FACS 1ffff800 00040
Jul 13 08:39:43 laptop kernel: 511MB LOWMEM available.
Jul 13 08:39:43 laptop kernel: mapped low ram: 0 - 1ffe2000
Jul 13 08:39:43 laptop kernel: low ram: 0 - 1ffe2000
Jul 13 08:39:43 laptop kernel: node 0 low ram: 00000000 - 1ffe2000
Jul 13 08:39:43 laptop kernel: node 0 bootmap 00001000 - 00005000
Jul 13 08:39:43 laptop kernel: (6 early reservations) ==> bootmem [0000000000 - 001ffe2000]
Jul 13 08:39:43 laptop kernel: #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
Jul 13 08:39:43 laptop kernel: #1 [0001000000 - 00013ebfc4] TEXT DATA BSS ==> [0001000000 - 00013ebfc4]
Jul 13 08:39:43 laptop kernel: #2 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
Jul 13 08:39:43 laptop kernel: #3 [00013ec000 - 00013f2198] BRK ==> [00013ec000 - 00013f2198]
Jul 13 08:39:43 laptop kernel: #4 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
Jul 13 08:39:43 laptop kernel: #5 [0000001000 - 0000005000] BOOTMAP ==> [0000001000 - 0000005000]
Jul 13 08:39:43 laptop kernel: Zone PFN ranges:
Jul 13 08:39:43 laptop kernel: DMA 0x00000000 -> 0x00001000
Jul 13 08:39:43 laptop kernel: Normal 0x00001000 -> 0x0001ffe2
Jul 13 08:39:43 laptop kernel: Movable zone start PFN for each node
Jul 13 08:39:43 laptop kernel: early_node_map[2] active PFN ranges
Jul 13 08:39:43 laptop kernel: 0: 0x00000000 -> 0x0000009f
Jul 13 08:39:43 laptop kernel: 0: 0x00000100 -> 0x0001ffe2
Jul 13 08:39:43 laptop kernel: On node 0 totalpages: 130945
Jul 13 08:39:43 laptop kernel: free_area_init_node: node 0, pgdat c136da20, node_mem_map c13f3000
Jul 13 08:39:43 laptop kernel: DMA zone: 32 pages used for memmap
Jul 13 08:39:43 laptop kernel: DMA zone: 0 pages reserved
Jul 13 08:39:43 laptop kernel: DMA zone: 3967 pages, LIFO batch:0
Jul 13 08:39:43 laptop kernel: Normal zone: 992 pages used for memmap
Jul 13 08:39:43 laptop kernel: Normal zone: 125954 pages, LIFO batch:31
Jul 13 08:39:43 laptop kernel: Using APIC driver default
Jul 13 08:39:43 laptop kernel: ACPI: PM-Timer IO Port: 0x808
Jul 13 08:39:43 laptop kernel: Local APIC disabled by BIOS -- you can enable it with "lapic"
Jul 13 08:39:43 laptop kernel: APIC: disable apic facility
Jul 13 08:39:43 laptop kernel: nr_irqs_gsi: 16
Jul 13 08:39:43 laptop kernel: Allocating PCI resources starting at 20000000 (gap: 20000000:deda0000)
Jul 13 08:39:43 laptop kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129921
Jul 13 08:39:43 laptop kernel: Kernel command line: root=/dev/hda7 ro noirda
Jul 13 08:39:43 laptop kernel: PID hash table entries: 2048 (order: 11, 8192 bytes)
Jul 13 08:39:43 laptop kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jul 13 08:39:43 laptop kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jul 13 08:39:43 laptop kernel: Enabling fast FPU save and restore... done.
Jul 13 08:39:43 laptop kernel: Enabling unmasked SIMD FPU exception support... done.
Jul 13 08:39:43 laptop kernel: Initializing CPU#0
Jul 13 08:39:43 laptop kernel: Memory: 515172k/524168k available (2558k kernel code, 8560k reserved, 990k data, 272k init, 0k highmem)
Jul 13 08:39:43 laptop kernel: virtual kernel memory layout:
Jul 13 08:39:43 laptop kernel: fixmap : 0xfffa4000 - 0xfffff000 ( 364 kB)
Jul 13 08:39:43 laptop kernel: vmalloc : 0xe07e2000 - 0xfffa2000 ( 503 MB)
Jul 13 08:39:43 laptop kernel: lowmem : 0xc0000000 - 0xdffe2000 ( 511 MB)
Jul 13 08:39:43 laptop kernel: .init : 0xc1379000 - 0xc13bd000 ( 272 kB)
Jul 13 08:39:43 laptop kernel: .data : 0xc127f8e9 - 0xc13773a8 ( 990 kB)
Jul 13 08:39:43 laptop kernel: .text : 0xc1000000 - 0xc127f8e9 (2558 kB)
Jul 13 08:39:43 laptop kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Jul 13 08:39:43 laptop kernel: SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jul 13 08:39:43 laptop kernel: NR_IRQS:288
Jul 13 08:39:43 laptop kernel: CPU 0 irqstacks, hard=c1370000 soft=c1371000
Jul 13 08:39:43 laptop kernel: Fast TSC calibration using PIT
Jul 13 08:39:43 laptop kernel: Detected 996.590 MHz processor.
Jul 13 08:39:43 laptop kernel: Console: colour VGA+ 80x25
Jul 13 08:39:43 laptop kernel: console [tty0] enabled
Jul 13 08:39:43 laptop kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 1993.18 BogoMIPS (lpj=3986360)
Jul 13 08:39:43 laptop kernel: Mount-cache hash table entries: 512
Jul 13 08:39:43 laptop kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Jul 13 08:39:43 laptop kernel: CPU: L2 cache: 512K
Jul 13 08:39:43 laptop kernel: mce: CPU supports 5 MCE banks
Jul 13 08:39:43 laptop kernel: Disabling lock debugging due to kernel taint
Jul 13 08:39:43 laptop kernel: CPU: Mobile Intel(R) Pentium(R) III CPU - M 1000MHz stepping 04
Jul 13 08:39:43 laptop kernel: Checking 'hlt' instruction... OK.
Jul 13 08:39:43 laptop kernel: ACPI: Core revision 20090521
Jul 13 08:39:43 laptop kernel: ACPI: setting ELCR to 0200 (from 0800)
Jul 13 08:39:43 laptop kernel: NET: Registered protocol family 16
Jul 13 08:39:43 laptop kernel: ACPI: bus type pci registered
Jul 13 08:39:43 laptop kernel: PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=2
Jul 13 08:39:43 laptop kernel: PCI: Using configuration type 1 for base access
Jul 13 08:39:43 laptop kernel: bio: create slab <bio-0> at 0
Jul 13 08:39:43 laptop kernel: ACPI: EC: Look up EC in DSDT
Jul 13 08:39:43 laptop kernel: ACPI: Interpreter enabled
Jul 13 08:39:43 laptop kernel: ACPI: (supports S0 S1 S3 S5)
Jul 13 08:39:43 laptop kernel: ACPI: Using PIC for interrupt routing
Jul 13 08:39:43 laptop kernel: ACPI: Power Resource [PADA] (on)
Jul 13 08:39:43 laptop kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Jul 13 08:39:43 laptop kernel: pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
Jul 13 08:39:43 laptop kernel: pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f]
Jul 13 08:39:43 laptop kernel: pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
Jul 13 08:39:43 laptop kernel: pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO
Jul 13 08:39:43 laptop kernel: pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
Jul 13 08:39:43 laptop kernel: pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
Jul 13 08:39:43 laptop kernel: pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
Jul 13 08:39:43 laptop kernel: pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
Jul 13 08:39:43 laptop kernel: pci 0000:00:1f.1: reg 20 io port: [0xbfa0-0xbfaf]
Jul 13 08:39:43 laptop kernel: pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
Jul 13 08:39:43 laptop kernel: pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd8ff]
Jul 13 08:39:43 laptop kernel: pci 0000:00:1f.5: reg 14 io port: [0xdc80-0xdcbf]
Jul 13 08:39:43 laptop kernel: pci 0000:00:1f.6: reg 10 io port: [0xd400-0xd4ff]
Jul 13 08:39:43 laptop kernel: pci 0000:00:1f.6: reg 14 io port: [0xdc00-0xdc7f]
Jul 13 08:39:43 laptop kernel: pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff]
Jul 13 08:39:43 laptop kernel: pci 0000:01:00.0: reg 14 io port: [0xc000-0xc0ff]
Jul 13 08:39:43 laptop kernel: pci 0000:01:00.0: reg 18 32bit mmio: [0xfcff0000-0xfcffffff]
Jul 13 08:39:43 laptop kernel: pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
Jul 13 08:39:43 laptop kernel: pci 0000:01:00.0: supports D1 D2
Jul 13 08:39:43 laptop kernel: pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
Jul 13 08:39:43 laptop kernel: pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfdffffff]
Jul 13 08:39:43 laptop kernel: pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff]
Jul 13 08:39:43 laptop kernel: pci 0000:02:00.0: reg 10 io port: [0xec80-0xecff]
Jul 13 08:39:43 laptop kernel: pci 0000:02:00.0: reg 14 32bit mmio: [0xf8fffc00-0xf8fffc7f]
Jul 13 08:39:43 laptop kernel: pci 0000:02:00.0: reg 30 32bit mmio: [0xf9000000-0xf901ffff]
Jul 13 08:39:43 laptop kernel: pci 0000:02:00.0: supports D1 D2
Jul 13 08:39:43 laptop kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Jul 13 08:39:43 laptop kernel: pci 0000:02:00.0: PME# disabled
Jul 13 08:39:43 laptop kernel: pci 0000:02:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
Jul 13 08:39:43 laptop kernel: pci 0000:02:01.0: supports D1 D2
Jul 13 08:39:43 laptop kernel: pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
Jul 13 08:39:43 laptop kernel: pci 0000:02:01.0: PME# disabled
Jul 13 08:39:43 laptop kernel: pci 0000:02:01.1: reg 10 32bit mmio: [0x000000-0x000fff]
Jul 13 08:39:43 laptop kernel: pci 0000:02:01.1: supports D1 D2
Jul 13 08:39:43 laptop kernel: pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
Jul 13 08:39:43 laptop kernel: pci 0000:02:01.1: PME# disabled
Jul 13 08:39:43 laptop kernel: pci 0000:00:1e.0: transparent bridge
Jul 13 08:39:43 laptop kernel: pci 0000:00:1e.0: bridge io port: [0xe000-0xffff]
Jul 13 08:39:43 laptop kernel: pci 0000:00:1e.0: bridge 32bit mmio: [0xf4000000-0xfbffffff]
Jul 13 08:39:43 laptop kernel: pci_bus 0000:00: on NUMA node 0
Jul 13 08:39:43 laptop kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jul 13 08:39:43 laptop kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Jul 13 08:39:43 laptop kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
Jul 13 08:39:43 laptop kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
Jul 13 08:39:43 laptop kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
Jul 13 08:39:43 laptop kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
Jul 13 08:39:43 laptop kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
Jul 13 08:39:43 laptop kernel: SCSI subsystem initialized
Jul 13 08:39:43 laptop kernel: PCI: Using ACPI for IRQ routing
Jul 13 08:39:43 laptop kernel: pnp: PnP ACPI init
Jul 13 08:39:43 laptop kernel: ACPI: bus type pnp registered
Jul 13 08:39:43 laptop kernel: pnp 00:02: io resource (0x800-0x805) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
Jul 13 08:39:43 laptop kernel: pnp 00:02: io resource (0x808-0x80f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
Jul 13 08:39:43 laptop kernel: pnp 00:03: io resource (0x806-0x807) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
Jul 13 08:39:43 laptop kernel: pnp 00:03: io resource (0x810-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
Jul 13 08:39:43 laptop kernel: pnp 00:03: io resource (0x860-0x87f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
Jul 13 08:39:43 laptop kernel: pnp 00:04: io resource (0xf000-0xf0fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
Jul 13 08:39:43 laptop kernel: pnp 00:04: io resource (0xf100-0xf1fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
Jul 13 08:39:43 laptop kernel: pnp 00:04: io resource (0xf200-0xf2fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
Jul 13 08:39:43 laptop kernel: pnp 00:04: io resource (0xf400-0xf4fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
Jul 13 08:39:43 laptop kernel: pnp 00:04: io resource (0xf500-0xf5fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
Jul 13 08:39:43 laptop kernel: pnp 00:04: io resource (0xf600-0xf6fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
Jul 13 08:39:43 laptop kernel: pnp 00:04: io resource (0xf800-0xf8fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
Jul 13 08:39:43 laptop kernel: pnp 00:04: io resource (0xf900-0xf9fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
Jul 13 08:39:43 laptop kernel: pnp 00:04: io resource (0xfa00-0xfafe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
Jul 13 08:39:43 laptop kernel: pnp 00:04: io resource (0xfc00-0xfcfe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
Jul 13 08:39:43 laptop kernel: pnp 00:04: io resource (0xfd00-0xfdfe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
Jul 13 08:39:43 laptop kernel: pnp 00:04: io resource (0xfe00-0xfefe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
Jul 13 08:39:43 laptop kernel: pnp 00:04: mem resource (0xfa000000-0xfbffffff) overlaps 0000:00:1e.0 BAR 8 (0xf4000000-0xfbffffff), disabling
Jul 13 08:39:43 laptop kernel: pnp: PnP ACPI: found 18 devices
Jul 13 08:39:43 laptop kernel: ACPI: ACPI bus type pnp unregistered
Jul 13 08:39:43 laptop kernel: system 00:00: iomem range 0x0-0x9fbff could not be reserved
Jul 13 08:39:43 laptop kernel: system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
Jul 13 08:39:43 laptop kernel: system 00:00: iomem range 0xc0000-0xcffff could not be reserved
Jul 13 08:39:43 laptop kernel: system 00:00: iomem range 0xe0000-0xfffff could not be reserved
Jul 13 08:39:43 laptop kernel: system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved
Jul 13 08:39:43 laptop kernel: system 00:00: iomem range 0x1fff0000-0x1fffffff has been reserved
Jul 13 08:39:43 laptop kernel: system 00:00: iomem range 0xfeda0000-0xfedfffff has been reserved
Jul 13 08:39:43 laptop kernel: system 00:00: iomem range 0xfff80000-0xffffffff has been reserved
Jul 13 08:39:43 laptop kernel: system 00:02: ioport range 0x4d0-0x4d1 has been reserved
Jul 13 08:39:43 laptop kernel: system 00:03: ioport range 0x880-0x8bf has been reserved
Jul 13 08:39:43 laptop kernel: system 00:03: ioport range 0x8c0-0x8df has been reserved
Jul 13 08:39:43 laptop kernel: system 00:03: ioport range 0x8e0-0x8ff has been reserved
Jul 13 08:39:43 laptop kernel: system 00:09: ioport range 0x900-0x91f has been reserved
Jul 13 08:39:43 laptop kernel: system 00:09: ioport range 0x3f0-0x3f1 has been reserved
Jul 13 08:39:43 laptop kernel: system 00:10: ioport range 0xbf40-0xbf5f has been reserved
Jul 13 08:39:43 laptop kernel: system 00:10: ioport range 0xbf20-0xbf3f has been reserved
Jul 13 08:39:43 laptop kernel: system 00:11: iomem range 0xfebffc00-0xfebfffff has been reserved
Jul 13 08:39:43 laptop kernel: pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
Jul 13 08:39:43 laptop kernel: pci 0000:00:01.0: IO window: 0xc000-0xcfff
Jul 13 08:39:43 laptop kernel: pci 0000:00:01.0: MEM window: 0xfc000000-0xfdffffff
Jul 13 08:39:43 laptop kernel: pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xe7ffffff
Jul 13 08:39:43 laptop kernel: pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03
Jul 13 08:39:43 laptop kernel: pci 0000:02:01.0: IO window: 0x00e000-0x00e0ff
Jul 13 08:39:43 laptop kernel: pci 0000:02:01.0: IO window: 0x00e400-0x00e4ff
Jul 13 08:39:43 laptop kernel: pci 0000:02:01.0: PREFETCH window: 0x20000000-0x23ffffff
Jul 13 08:39:43 laptop kernel: pci 0000:02:01.0: MEM window: 0xf4000000-0xf7ffffff
Jul 13 08:39:43 laptop kernel: pci 0000:02:01.1: CardBus bridge, secondary bus 0000:07
Jul 13 08:39:43 laptop kernel: pci 0000:02:01.1: IO window: 0x00e800-0x00e8ff
Jul 13 08:39:43 laptop kernel: pci 0000:02:01.1: IO window: 0x00f000-0x00f0ff
Jul 13 08:39:43 laptop kernel: pci 0000:02:01.1: PREFETCH window: 0x24000000-0x27ffffff
Jul 13 08:39:43 laptop kernel: pci 0000:02:01.1: MEM window: 0x2c000000-0x2fffffff
Jul 13 08:39:43 laptop kernel: pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
Jul 13 08:39:43 laptop kernel: pci 0000:00:1e.0: IO window: 0xe000-0xffff
Jul 13 08:39:43 laptop kernel: pci 0000:00:1e.0: MEM window: 0xf4000000-0xfbffffff
Jul 13 08:39:43 laptop kernel: pci 0000:00:1e.0: PREFETCH window: 0x20000000-0x27ffffff
Jul 13 08:39:43 laptop kernel: pci 0000:00:1e.0: setting latency timer to 64
Jul 13 08:39:44 laptop kernel: pci 0000:02:01.0: enabling device (0000 -> 0003)
Jul 13 08:39:44 laptop kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Jul 13 08:39:44 laptop kernel: PCI: setting IRQ 11 as level-triggered
Jul 13 08:39:44 laptop kernel: pci 0000:02:01.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
Jul 13 08:39:44 laptop kernel: pci 0000:02:01.1: enabling device (0000 -> 0003)
Jul 13 08:39:44 laptop kernel: pci 0000:02:01.1: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
Jul 13 08:39:44 laptop kernel: pci_bus 0000:00: resource 0 io: [0x00-0xffff]
Jul 13 08:39:44 laptop kernel: pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Jul 13 08:39:44 laptop kernel: pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
Jul 13 08:39:44 laptop kernel: pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfdffffff]
Jul 13 08:39:44 laptop kernel: pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff]
Jul 13 08:39:44 laptop kernel: pci_bus 0000:02: resource 0 io: [0xe000-0xffff]
Jul 13 08:39:44 laptop kernel: pci_bus 0000:02: resource 1 mem: [0xf4000000-0xfbffffff]
Jul 13 08:39:44 laptop kernel: pci_bus 0000:02: resource 2 pref mem [0x20000000-0x27ffffff]
Jul 13 08:39:44 laptop kernel: pci_bus 0000:02: resource 3 io: [0x00-0xffff]
Jul 13 08:39:44 laptop kernel: pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
Jul 13 08:39:44 laptop kernel: pci_bus 0000:03: resource 0 io: [0xe000-0xe0ff]
Jul 13 08:39:44 laptop kernel: pci_bus 0000:03: resource 1 io: [0xe400-0xe4ff]
Jul 13 08:39:44 laptop kernel: pci_bus 0000:03: resource 2 pref mem [0x20000000-0x23ffffff]
Jul 13 08:39:44 laptop kernel: pci_bus 0000:03: resource 3 mem: [0xf4000000-0xf7ffffff]
Jul 13 08:39:44 laptop kernel: pci_bus 0000:07: resource 0 io: [0xe800-0xe8ff]
Jul 13 08:39:44 laptop kernel: pci_bus 0000:07: resource 1 io: [0xf000-0xf0ff]
Jul 13 08:39:44 laptop kernel: pci_bus 0000:07: resource 2 pref mem [0x24000000-0x27ffffff]
Jul 13 08:39:44 laptop kernel: pci_bus 0000:07: resource 3 mem: [0x2c000000-0x2fffffff]
Jul 13 08:39:44 laptop kernel: NET: Registered protocol family 2
Jul 13 08:39:44 laptop kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jul 13 08:39:44 laptop kernel: TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Jul 13 08:39:44 laptop kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jul 13 08:39:44 laptop kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jul 13 08:39:44 laptop kernel: TCP reno registered
Jul 13 08:39:44 laptop kernel: NET: Registered protocol family 1
Jul 13 08:39:44 laptop kernel: msgmni has been set to 1006
Jul 13 08:39:44 laptop kernel: alg: No test for stdrng (krng)
Jul 13 08:39:44 laptop kernel: io scheduler noop registered
Jul 13 08:39:44 laptop kernel: io scheduler cfq registered (default)
Jul 13 08:39:44 laptop kernel: pci 0000:01:00.0: Boot video device
Jul 13 08:39:44 laptop kernel: ACPI: AC Adapter [AC] (on-line)
Jul 13 08:39:44 laptop kernel: input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
Jul 13 08:39:44 laptop kernel: ACPI: Lid Switch [LID]
Jul 13 08:39:44 laptop kernel: input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
Jul 13 08:39:44 laptop kernel: ACPI: Power Button [PBTN]
Jul 13 08:39:44 laptop kernel: input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
Jul 13 08:39:44 laptop kernel: ACPI: Sleep Button [SBTN]
Jul 13 08:39:44 laptop kernel: Marking TSC unstable due to TSC halts in idle
Jul 13 08:39:44 laptop kernel: ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Jul 13 08:39:44 laptop kernel: processor LNXCPU:00: registered as cooling_device0
Jul 13 08:39:44 laptop kernel: Switched to NOHz mode on CPU #0
Jul 13 08:39:44 laptop kernel: thermal LNXTHERM:01: registered as thermal_zone0
Jul 13 08:39:44 laptop kernel: ACPI: Thermal Zone [THM] (35 C)
Jul 13 08:39:44 laptop kernel: isapnp: Scanning for PnP cards...
Jul 13 08:39:44 laptop kernel: isapnp: No Plug & Play device found
Jul 13 08:39:44 laptop kernel: Real Time Clock Driver v1.12b
Jul 13 08:39:44 laptop kernel: Linux agpgart interface v0.103
Jul 13 08:39:44 laptop kernel: agpgart-intel 0000:00:00.0: Intel 830M Chipset
Jul 13 08:39:44 laptop kernel: agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
Jul 13 08:39:44 laptop kernel: [drm] Initialized drm 1.1.0 20060810
Jul 13 08:39:44 laptop kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Jul 13 08:39:44 laptop kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jul 13 08:39:44 laptop kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jul 13 08:39:44 laptop kernel: Platform driver 'serial8250' needs updating - please use dev_pm_ops
Jul 13 08:39:44 laptop kernel: 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jul 13 08:39:44 laptop kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
Jul 13 08:39:44 laptop kernel: PCI: setting IRQ 5 as level-triggered
Jul 13 08:39:44 laptop kernel: serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
Jul 13 08:39:44 laptop kernel: serial 0000:00:1f.6: PCI INT B disabled
Jul 13 08:39:44 laptop kernel: Uniform Multi-Platform E-IDE driver
Jul 13 08:39:44 laptop kernel: piix 0000:00:1f.1: IDE controller (0x8086:0x248a rev 0x02)
Jul 13 08:39:44 laptop kernel: pci 0000:00:1f.1: enabling device (0005 -> 0007)
Jul 13 08:39:44 laptop kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Jul 13 08:39:44 laptop kernel: pci 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
Jul 13 08:39:44 laptop kernel: piix 0000:00:1f.1: not 100% native mode: will probe irqs later
Jul 13 08:39:44 laptop kernel: ide0: BM-DMA at 0xbfa0-0xbfa7
Jul 13 08:39:44 laptop kernel: ide1: BM-DMA at 0xbfa8-0xbfaf
Jul 13 08:39:44 laptop kernel: Probing IDE interface ide0...
Jul 13 08:39:44 laptop kernel: ACPI: Battery Slot [BAT0] (battery present)
Jul 13 08:39:44 laptop kernel: ACPI: Battery Slot [BAT1] (battery absent)
Jul 13 08:39:44 laptop kernel: hda: SAMSUNG HM160HC, ATA DISK drive
Jul 13 08:39:44 laptop kernel: hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
Jul 13 08:39:44 laptop kernel: hda: UDMA/100 mode selected
Jul 13 08:39:44 laptop kernel: Probing IDE interface ide1...
Jul 13 08:39:44 laptop kernel: hdc: HL-DT-ST DVD+/-RW GSA-T11N, ATAPI CD/DVD-ROM drive
Jul 13 08:39:44 laptop kernel: hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
Jul 13 08:39:44 laptop kernel: hdc: UDMA/33 mode selected
Jul 13 08:39:44 laptop kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jul 13 08:39:44 laptop kernel: ide1 at 0x170-0x177,0x376 on irq 15
Jul 13 08:39:44 laptop kernel: ide-gd driver 1.18
Jul 13 08:39:44 laptop kernel: hda: max request size: 512KiB
Jul 13 08:39:44 laptop kernel: hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
Jul 13 08:39:44 laptop kernel: hda: cache flushes supported
Jul 13 08:39:44 laptop kernel: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
Jul 13 08:39:44 laptop kernel: ide-cd driver 5.00
Jul 13 08:39:44 laptop kernel: ide-cd: hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Jul 13 08:39:44 laptop kernel: Uniform CD-ROM driver Revision: 3.20
Jul 13 08:39:44 laptop kernel: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Jul 13 08:39:44 laptop kernel: Platform driver 'i8042' needs updating - please use dev_pm_ops
Jul 13 08:39:44 laptop kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jul 13 08:39:44 laptop kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jul 13 08:39:44 laptop kernel: mice: PS/2 mouse device common for all mice
Jul 13 08:39:44 laptop kernel: Platform driver 'pcspkr' needs updating - please use dev_pm_ops
Jul 13 08:39:44 laptop kernel: input: PC Speaker as /devices/platform/pcspkr/input/input3
Jul 13 08:39:44 laptop kernel: cpuidle: using governor ladder
Jul 13 08:39:44 laptop kernel: cpuidle: using governor menu
Jul 13 08:39:44 laptop kernel: Advanced Linux Sound Architecture Driver Version 1.0.20.
Jul 13 08:39:44 laptop kernel: Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
Jul 13 08:39:44 laptop kernel: Intel ICH 0000:00:1f.5: setting latency timer to 64
Jul 13 08:39:44 laptop kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Jul 13 08:39:44 laptop kernel: Clocksource tsc unstable (delta = -290658918 ns)
Jul 13 08:39:44 laptop kernel: intel8x0_measure_ac97_clock: measured 55205 usecs (2654 samples)
Jul 13 08:39:44 laptop kernel: intel8x0: clocking to 48000
Jul 13 08:39:44 laptop kernel: ALSA device list:
Jul 13 08:39:44 laptop kernel: #0: Intel 82801CA-ICH3 with CS4205 at irq 5
Jul 13 08:39:44 laptop kernel: TCP cubic registered
Jul 13 08:39:44 laptop kernel: NET: Registered protocol family 15
Jul 13 08:39:44 laptop kernel: Using IPI Shortcut mode
Jul 13 08:39:44 laptop kernel: kjournald starting. Commit interval 5 seconds
Jul 13 08:39:44 laptop kernel: EXT3-fs: mounted filesystem with writeback data mode.
Jul 13 08:39:44 laptop kernel: VFS: Mounted root (ext3 filesystem) readonly on device 3:7.
Jul 13 08:39:44 laptop kernel: Freeing unused kernel memory: 272k freed
Jul 13 08:39:44 laptop kernel: EXT3 FS on hda7, internal journal
Jul 13 08:39:44 laptop kernel: usbcore: registered new interface driver usbfs
Jul 13 08:39:44 laptop kernel: usbcore: registered new interface driver hub
Jul 13 08:39:44 laptop kernel: usbcore: registered new device driver usb
Jul 13 08:39:44 laptop kernel: uhci_hcd: USB Universal Host Controller Interface driver
Jul 13 08:39:44 laptop kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
Jul 13 08:39:44 laptop kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
Jul 13 08:39:44 laptop kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jul 13 08:39:44 laptop kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Jul 13 08:39:44 laptop kernel: uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
Jul 13 08:39:44 laptop kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Jul 13 08:39:44 laptop kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul 13 08:39:44 laptop kernel: usb usb1: Product: UHCI Host Controller
Jul 13 08:39:44 laptop kernel: usb usb1: Manufacturer: Linux 2.6.31-rc2-bi uhci_hcd
Jul 13 08:39:44 laptop kernel: usb usb1: SerialNumber: 0000:00:1d.0
Jul 13 08:39:44 laptop kernel: usb usb1: configuration #1 chosen from 1 choice
Jul 13 08:39:44 laptop kernel: hub 1-0:1.0: USB hub found
Jul 13 08:39:44 laptop kernel: hub 1-0:1.0: 2 ports detected
Jul 13 08:39:44 laptop kernel: Platform driver 'floppy' needs updating - please use dev_pm_ops
Jul 13 08:39:44 laptop kernel: Floppy drive(s): fd0 is 1.44M
Jul 13 08:39:44 laptop kernel: parport_pc 00:0f: reported by Plug and Play ACPI
Jul 13 08:39:44 laptop kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Jul 13 08:39:44 laptop kernel: FDC 0 is a post-1991 82077
Jul 13 08:39:44 laptop kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
Jul 13 08:39:44 laptop kernel: 3c59x 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
Jul 13 08:39:44 laptop kernel: 3c59x: Donald Becker and others.
Jul 13 08:39:44 laptop kernel: 0000:02:00.0: 3Com PCI 3c905C Tornado at e08eac00.
Jul 13 08:39:44 laptop kernel: usb 1-1: new low speed USB device using uhci_hcd and address 2
Jul 13 08:39:44 laptop kernel: NET: Registered protocol family 23
Jul 13 08:39:44 laptop kernel: Platform driver 'smsc-ircc2' needs updating - please use dev_pm_ops
Jul 13 08:39:44 laptop kernel: found SMC SuperIO Chip (devid=0x0e rev=01 base=0x002e): LPC47N252
Jul 13 08:39:44 laptop kernel: smsc_ircc_present: can't get sir_base of 0x2f8
Jul 13 08:39:44 laptop kernel: Platform driver 'smsc-ircc2' needs updating - please use dev_pm_ops
Jul 13 08:39:44 laptop kernel: found SMC SuperIO Chip (devid=0x0e rev=01 base=0x002e): LPC47N252
Jul 13 08:39:44 laptop kernel: smsc_ircc_present: can't get sir_base of 0x2f8
Jul 13 08:39:44 laptop kernel: yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:00e3]
Jul 13 08:39:44 laptop kernel: yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI
Jul 13 08:39:44 laptop kernel: yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI
Jul 13 08:39:44 laptop kernel: yenta_cardbus 0000:02:01.0: TI: mfunc 0x01261222, devctl 0x64
Jul 13 08:39:44 laptop kernel: usb 1-1: New USB device found, idVendor=046d, idProduct=c016
Jul 13 08:39:44 laptop kernel: usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jul 13 08:39:44 laptop kernel: usb 1-1: Product: Optical USB Mouse
Jul 13 08:39:44 laptop kernel: usb 1-1: Manufacturer: Logitech
Jul 13 08:39:44 laptop kernel: usb 1-1: configuration #1 chosen from 1 choice
Jul 13 08:39:44 laptop kernel: yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0418, PCI irq 11
Jul 13 08:39:44 laptop kernel: yenta_cardbus 0000:02:01.0: Socket status: 30000020
Jul 13 08:39:44 laptop kernel: yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
Jul 13 08:39:44 laptop kernel: pcmcia_socket pcmcia_socket0: cs: IO port probe 0xe000-0xffff: clean.
Jul 13 08:39:44 laptop kernel: yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
Jul 13 08:39:44 laptop kernel: yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff
Jul 13 08:39:44 laptop kernel: yenta_cardbus 0000:02:01.1: CardBus bridge found [1028:00e3]
Jul 13 08:39:44 laptop kernel: yenta_cardbus 0000:02:01.1: Using CSCINT to route CSC interrupts to PCI
Jul 13 08:39:44 laptop kernel: yenta_cardbus 0000:02:01.1: Routing CardBus interrupts to PCI
Jul 13 08:39:44 laptop kernel: yenta_cardbus 0000:02:01.1: TI: mfunc 0x01261222, devctl 0x64
Jul 13 08:39:44 laptop kernel: Synaptics Touchpad, model: 1, fw: 5.7, id: 0x9b48b1, caps: 0x804793/0x0
Jul 13 08:39:44 laptop kernel: serio: Synaptics pass-through port at isa0060/serio1/input0
Jul 13 08:39:44 laptop kernel: yenta_cardbus 0000:02:01.1: ISA IRQ mask 0x0418, PCI irq 11
Jul 13 08:39:44 laptop kernel: yenta_cardbus 0000:02:01.1: Socket status: 30000020
Jul 13 08:39:44 laptop kernel: yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
Jul 13 08:39:44 laptop kernel: pcmcia_socket pcmcia_socket1: cs: IO port probe 0xe000-0xffff: clean.
Jul 13 08:39:44 laptop kernel: yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
Jul 13 08:39:44 laptop kernel: yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff
Jul 13 08:39:44 laptop kernel: input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
Jul 13 08:39:44 laptop kernel: pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcff: clean.
Jul 13 08:39:44 laptop kernel: pcmcia_socket pcmcia_socket1: cs: IO port probe 0x800-0x8ff: clean.
Jul 13 08:39:44 laptop kernel: pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x4ff: excluding 0x280-0x287
Jul 13 08:39:44 laptop kernel: pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
Jul 13 08:39:44 laptop kernel: input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input6
Jul 13 08:39:44 laptop kernel: generic-usb 0003:046D:C016.0001: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1/input0
Jul 13 08:39:44 laptop kernel: usbcore: registered new interface driver usbhid
Jul 13 08:39:44 laptop kernel: usbhid: v2.6:USB HID core driver
Jul 13 08:39:44 laptop kernel: pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
Jul 13 08:39:44 laptop kernel: pci 0000:03:00.0: reg 10 32bit mmio: [0xffff8000-0xffffffff]
Jul 13 08:39:44 laptop kernel: cfg80211: Calling CRDA to update world regulatory domain
Jul 13 08:39:44 laptop kernel: pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1
Jul 13 08:39:44 laptop kernel: pci 0000:07:00.0: reg 10 32bit mmio: [0x000000-0x000fff]
Jul 13 08:39:44 laptop kernel: pci 0000:07:00.0: supports D1 D2
Jul 13 08:39:44 laptop kernel: pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot
Jul 13 08:39:44 laptop kernel: pci 0000:07:00.0: PME# disabled
Jul 13 08:39:44 laptop kernel: pci 0000:07:00.1: reg 10 32bit mmio: [0x000000-0x000fff]
Jul 13 08:39:44 laptop kernel: pci 0000:07:00.1: supports D1 D2
Jul 13 08:39:44 laptop kernel: pci 0000:07:00.1: PME# supported from D0 D1 D2 D3hot
Jul 13 08:39:44 laptop kernel: pci 0000:07:00.1: PME# disabled
Jul 13 08:39:44 laptop kernel: pci 0000:07:00.2: reg 10 32bit mmio: [0x000000-0x0000ff]
Jul 13 08:39:44 laptop kernel: pci 0000:07:00.2: supports D1 D2
Jul 13 08:39:44 laptop kernel: pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot
Jul 13 08:39:44 laptop kernel: pci 0000:07:00.2: PME# disabled
Jul 13 08:39:44 laptop kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jul 13 08:39:44 laptop kernel: Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
Jul 13 08:39:44 laptop kernel: ehci_hcd 0000:07:00.2: enabling device (0000 -> 0002)
Jul 13 08:39:44 laptop kernel: ehci_hcd 0000:07:00.2: PCI INT C -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
Jul 13 08:39:44 laptop kernel: ehci_hcd 0000:07:00.2: EHCI Host Controller
Jul 13 08:39:44 laptop kernel: ehci_hcd 0000:07:00.2: new USB bus registered, assigned bus number 2
Jul 13 08:39:44 laptop kernel: ehci_hcd 0000:07:00.2: irq 11, io mem 0x2c002000
Jul 13 08:39:44 laptop kernel: ehci_hcd 0000:07:00.2: USB 2.0 started, EHCI 1.00
Jul 13 08:39:44 laptop kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Jul 13 08:39:44 laptop kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul 13 08:39:44 laptop kernel: usb usb2: Product: EHCI Host Controller
Jul 13 08:39:44 laptop kernel: usb usb2: Manufacturer: Linux 2.6.31-rc2-bi ehci_hcd
Jul 13 08:39:44 laptop kernel: usb usb2: SerialNumber: 0000:07:00.2
Jul 13 08:39:44 laptop kernel: usb usb2: configuration #1 chosen from 1 choice
Jul 13 08:39:44 laptop kernel: hub 2-0:1.0: USB hub found
Jul 13 08:39:44 laptop kernel: hub 2-0:1.0: 5 ports detected
Jul 13 08:39:44 laptop kernel: rt61pci 0000:03:00.0: enabling device (0000 -> 0002)
Jul 13 08:39:44 laptop kernel: rt61pci 0000:03:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
Jul 13 08:39:44 laptop kernel: rt61pci 0000:03:00.0: setting latency timer to 64
Jul 13 08:39:44 laptop kernel: phy0 -> rt61pci_validate_eeprom: EEPROM recovery - NIC: 0xff80
Jul 13 08:39:44 laptop kernel: phy0 -> rt61pci_validate_eeprom: EEPROM recovery - Led: 0xe0ff
Jul 13 08:39:44 laptop kernel: phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 0301, rf: 0003, rev: 0002561c.
Jul 13 08:39:44 laptop kernel: pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: clean.
Jul 13 08:39:44 laptop kernel: pcmcia_socket pcmcia_socket0: cs: IO port probe 0x800-0x8ff: clean.
Jul 13 08:39:44 laptop kernel: pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x4ff: excluding 0x280-0x287
Jul 13 08:39:44 laptop kernel: pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
Jul 13 08:39:44 laptop kernel: cfg80211: World regulatory domain updated:
Jul 13 08:39:44 laptop kernel: ^I(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jul 13 08:39:44 laptop kernel: ^I(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 13 08:39:44 laptop kernel: ^I(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jul 13 08:39:44 laptop kernel: ^I(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jul 13 08:39:44 laptop kernel: ^I(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 13 08:39:44 laptop kernel: ^I(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 13 08:39:44 laptop kernel: phy0: Selected rate control algorithm 'minstrel'
Jul 13 08:39:44 laptop kernel: Registered led device: rt61pci-phy0::radio
Jul 13 08:39:44 laptop kernel: Registered led device: rt61pci-phy0::assoc
Jul 13 08:39:44 laptop kernel: phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561s.bin'.
Jul 13 08:39:44 laptop kernel: rt61pci 0000:03:00.0: firmware: requesting rt2561s.bin
Jul 13 08:39:44 laptop kernel: phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8.
Jul 13 08:39:44 laptop kernel: phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
Jul 13 08:39:44 laptop kernel: phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
Jul 13 08:39:44 laptop kernel: phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
Jul 13 08:39:44 laptop kernel: phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
Jul 13 08:39:44 laptop kernel: NET: Registered protocol family 17
Jul 13 08:39:44 laptop kernel: phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
Jul 13 08:39:44 laptop kernel: phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
Jul 13 08:39:44 laptop kernel: phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
Jul 13 08:39:44 laptop kernel: phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
Jul 13 08:39:44 laptop kernel: wlan0: authenticate with AP 00:1f:33:80:09:44
Jul 13 08:39:44 laptop kernel: wlan0: authenticated
Jul 13 08:39:44 laptop kernel: wlan0: associate with AP 00:1f:33:80:09:44
Jul 13 08:39:44 laptop kernel: wlan0: RX AssocResp from 00:1f:33:80:09:44 (capab=0x431 status=0 aid=1)
Jul 13 08:39:44 laptop kernel: wlan0: associated
Jul 13 08:39:44 laptop kernel: phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
Jul 13 08:39:44 laptop kernel: phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
Jul 13 08:39:44 laptop kernel: phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
Jul 13 08:39:44 laptop kernel: phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
Jul 13 08:39:44 laptop kernel: cfg80211: Calling CRDA for country: GB
Jul 13 08:39:44 laptop kernel: cfg80211: Regulatory domain changed to country: GB
Jul 13 08:39:44 laptop kernel: ^I(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jul 13 08:39:44 laptop kernel: ^I(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 13 08:39:44 laptop kernel: ^I(5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 13 08:39:44 laptop kernel: ^I(5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 13 08:39:44 laptop kernel: ^I(5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jul 13 08:39:44 laptop kernel: microcode: CPU0 sig=0x6b4, pf=0x20, revision=0x2
Jul 13 08:39:44 laptop kernel: platform microcode: firmware: requesting intel-ucode/06-0b-04
Jul 13 08:39:44 laptop kernel: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Jul 13 08:39:44 laptop kernel: Microcode Update Driver: v2.00 removed.
Jul 13 08:39:44 laptop kernel: IBM TrackPoint firmware: 0x0b, buttons: 2/3
Jul 13 08:39:44 laptop kernel: input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
Jul 13 08:39:44 laptop kernel: Adding 1048568k swap on /swapfile. Priority:-1 extents:316 across:4686700k
Jul 13 08:39:44 laptop kernel: wlan0: deauthenticated (Reason: 1)
Jul 13 08:39:44 laptop kernel: phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
Jul 13 08:39:44 laptop kernel: phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
Jul 13 08:39:44 laptop kernel: phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
Jul 13 08:39:44 laptop kernel: phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
Jul 13 08:39:44 laptop kernel: wlan0: direct probe to AP 00:1f:33:80:09:44 try 1
Jul 13 08:39:44 laptop kernel: wlan0: direct probe to AP 00:1f:33:80:09:44 try 2
Jul 13 08:39:44 laptop kernel: wlan0 direct probe responded
Jul 13 08:39:44 laptop kernel: wlan0: authenticate with AP 00:1f:33:80:09:44
Jul 13 08:39:44 laptop kernel: wlan0: authenticated
Jul 13 08:39:44 laptop kernel: wlan0: associate with AP 00:1f:33:80:09:44
Jul 13 08:39:44 laptop kernel: wlan0: RX ReassocResp from 00:1f:33:80:09:44 (capab=0x431 status=0 aid=1)
Jul 13 08:39:44 laptop kernel: wlan0: associated
Jul 13 08:39:44 laptop kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jul 13 08:39:44 laptop kernel: nf_conntrack version 0.5.0 (8190 buckets, 32760 max)
Jul 13 08:39:44 laptop kernel: NET: Unregistered protocol family 23
Jul 13 08:39:44 laptop kernel: parport_pc 00:0f: disabled
Jul 13 08:39:44 laptop kernel: 3c59x 0000:02:00.0: PCI INT A disabled
Jul 13 08:39:44 laptop kernel: wlan0: deauthenticated (Reason: 1)
Jul 13 08:39:44 laptop kernel: phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
Jul 13 08:39:44 laptop kernel: phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
Jul 13 08:39:44 laptop kernel: phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
Jul 13 08:39:44 laptop kernel: phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
Jul 13 08:39:44 laptop kernel: wlan0: direct probe to AP 00:1f:33:80:09:44 try 1
Jul 13 08:39:44 laptop kernel: wlan0 direct probe responded
Jul 13 08:39:44 laptop kernel: wlan0: authenticate with AP 00:1f:33:80:09:44
Jul 13 08:39:44 laptop kernel: wlan0: authenticated
Jul 13 08:39:44 laptop kernel: wlan0: associate with AP 00:1f:33:80:09:44
Jul 13 08:39:44 laptop kernel: wlan0: RX ReassocResp from 00:1f:33:80:09:44 (capab=0x431 status=0 aid=1)
Jul 13 08:39:44 laptop kernel: wlan0: associated
Jul 13 08:39:45 laptop kernel: pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
Jul 13 08:39:45 laptop kernel: [drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0
Jul 13 08:39:45 laptop kernel: agpgart-intel 0000:00:00.0: AGP 2.0 bridge
Jul 13 08:39:45 laptop kernel: agpgart-intel 0000:00:00.0: putting AGP V2 device into 2x mode
Jul 13 08:39:45 laptop kernel: pci 0000:01:00.0: putting AGP V2 device into 2x mode
Jul 13 08:39:45 laptop kernel: resource map sanity check conflict: 0xfcff0000 0xfd06ffff 0xfcff0000 0xfcffffff 0000:01:00.0
Jul 13 08:39:45 laptop kernel: ------------[ cut here ]------------
Jul 13 08:39:45 laptop kernel: WARNING: at arch/x86/mm/ioremap.c:205 __ioremap_caller+0x2aa/0x2c0()
Jul 13 08:39:45 laptop kernel: Hardware name: Latitude C610
Jul 13 08:39:45 laptop kernel: Info: mapping multiple BARs. Your kernel is fine.
Jul 13 08:39:45 laptop kernel: Modules linked in: radeon xt_state iptable_filter ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables x_tables af_packet arc4 ecb rt61pci crc_itu_t ehci_hcd rt2x00pci rt2x00lib led_class input_polldev mac80211 cfg80211 eeprom_93cx6 usbhid yenta_socket rsrc_nonstatic psmouse pcmcia_core floppy uhci_hcd usbcore [last unloaded: 3c59x]
Jul 13 08:39:45 laptop kernel: Pid: 1227, comm: X Tainted: G M 2.6.31-rc2-bi #233
Jul 13 08:39:45 laptop kernel: Call Trace:
Jul 13 08:39:45 laptop kernel: [<c101993a>] ? __ioremap_caller+0x2aa/0x2c0
Jul 13 08:39:45 laptop kernel: [<c101993a>] ? __ioremap_caller+0x2aa/0x2c0
Jul 13 08:39:45 laptop kernel: [<c102546f>] ? warn_slowpath_common+0x6f/0xd0
Jul 13 08:39:45 laptop kernel: [<c101993a>] ? __ioremap_caller+0x2aa/0x2c0
Jul 13 08:39:45 laptop kernel: [<c102551b>] ? warn_slowpath_fmt+0x2b/0x30
Jul 13 08:39:45 laptop kernel: [<c101993a>] ? __ioremap_caller+0x2aa/0x2c0
Jul 13 08:39:45 laptop kernel: [<c105605b>] ? generic_file_buffered_write+0xfb/0x330
Jul 13 08:39:45 laptop kernel: [<c1019a64>] ? ioremap_nocache+0x14/0x20
Jul 13 08:39:45 laptop kernel: [<c117a855>] ? drm_addmap_core+0x655/0x790
Jul 13 08:39:45 laptop kernel: [<c117a855>] ? drm_addmap_core+0x655/0x790
Jul 13 08:39:45 laptop kernel: [<c1056798>] ? __generic_file_aio_write_nolock+0x248/0x540
Jul 13 08:39:45 laptop kernel: [<c117a9d7>] ? drm_addmap_ioctl+0x47/0x90
Jul 13 08:39:45 laptop kernel: [<c117bb88>] ? drm_ioctl+0x138/0x320
Jul 13 08:39:45 laptop kernel: [<c117a990>] ? drm_addmap_ioctl+0x0/0x90
Jul 13 08:39:45 laptop kernel: [<c10ca8a0>] ? ext3_file_write+0x30/0xc0
Jul 13 08:39:45 laptop kernel: [<c107e8ed>] ? do_sync_write+0xcd/0x110
Jul 13 08:39:45 laptop kernel: [<c108ba3f>] ? vfs_ioctl+0x7f/0x90
Jul 13 08:39:45 laptop kernel: [<c108bbb3>] ? do_vfs_ioctl+0x73/0x630
Jul 13 08:39:45 laptop kernel: [<c107f418>] ? vfs_write+0xf8/0x130
Jul 13 08:39:45 laptop kernel: [<c108c1ad>] ? sys_ioctl+0x3d/0x70
Jul 13 08:39:45 laptop kernel: [<c1002e34>] ? sysenter_do_call+0x12/0x26
Jul 13 08:39:45 laptop kernel: ---[ end trace 250e88637fe242af ]---
Jul 13 08:39:45 laptop kernel: [drm] Setting GART location based on old memory map
Jul 13 08:39:45 laptop kernel: [drm] Loading R100 Microcode
Jul 13 08:39:45 laptop kernel: [drm] writeback test succeeded in 1 usecs
Jul 13 08:39:49 laptop kdm_greet[1241]: Can't open default user face
Jul 13 08:39:49 laptop kdm_greet[1241]: Can't open default user face
Jul 13 08:40:29 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:40:29 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:40:30 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:40:31 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 13
Jul 13 08:40:31 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 5
Jul 13 08:40:31 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 1
Jul 13 08:40:31 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 23
Jul 13 08:40:31 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 0
Jul 13 08:40:32 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 16
Jul 13 08:40:32 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 3
Jul 13 08:40:32 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 21
Jul 13 08:40:33 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:40:33 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 19
Jul 13 08:40:33 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 21
Jul 13 08:40:33 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 1
Jul 13 08:40:33 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:40:34 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:40:34 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:40:34 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:40:34 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:40:34 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:40:34 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:40:35 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:40:35 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 1
Jul 13 08:40:36 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 16
Jul 13 08:40:36 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:40:36 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:40:36 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 1
Jul 13 08:40:36 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 19
Jul 13 08:40:36 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:40:36 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:40:37 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:40:37 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:40:38 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 16
Jul 13 08:40:38 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:40:38 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:40:38 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:40:38 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 0
Jul 13 08:40:38 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:40:38 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:40:38 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:40:38 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:40:39 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:40:39 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:40:39 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:40:39 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:40:39 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:40:39 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:40:39 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:40:39 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:40:39 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:40:39 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:40:39 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 0
Jul 13 08:40:39 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:40:40 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:40:40 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:40:40 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:40:40 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:40:40 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:40:40 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:40:40 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:40:40 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:40:40 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:40:41 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:40:41 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:40:42 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:40:42 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:40:42 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 16
Jul 13 08:40:42 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:40:42 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:40:42 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:40:42 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:40:42 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:40:43 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:40:43 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:40:43 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:40:43 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:40:43 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:40:44 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:40:44 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:40:44 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:40:44 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:40:44 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:40:44 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:40:44 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:40:44 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:40:44 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:40:44 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:40:44 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:40:44 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:40:44 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:40:44 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:40:44 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:40:45 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:40:45 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:40:45 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:40:45 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:40:45 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:40:45 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:40:45 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:40:45 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:40:45 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:40:46 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:40:46 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 0
Jul 13 08:40:46 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:40:46 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:40:46 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:40:47 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 16
Jul 13 08:40:47 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:40:47 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 16
Jul 13 08:40:47 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:40:47 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 0
Jul 13 08:40:47 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 16
Jul 13 08:40:47 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:40:47 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:40:47 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:40:47 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 16
Jul 13 08:40:47 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:40:47 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:40:48 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:40:48 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:40:48 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:40:48 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:40:48 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:40:48 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:40:48 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:40:48 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:40:48 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:40:48 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 16
Jul 13 08:40:49 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:40:49 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:40:49 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:40:49 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:40:49 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:40:49 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:40:50 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:40:50 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:40:50 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:40:51 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:40:51 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:40:51 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:40:51 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:40:51 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:40:51 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:40:52 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:40:52 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:40:52 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:40:53 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:40:54 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:40:54 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:40:54 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:40:54 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:40:54 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:40:54 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:40:54 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:40:55 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:40:55 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:40:55 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:40:56 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:40:56 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 0
Jul 13 08:40:56 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:40:56 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:40:56 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:40:56 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:40:56 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:40:57 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:40:57 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 0
Jul 13 08:40:57 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:40:57 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 0
Jul 13 08:40:57 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:40:57 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:40:57 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 0
Jul 13 08:40:58 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:40:58 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:40:58 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:40:58 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:40:58 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:40:58 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:40:58 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:40:59 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:40:59 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:40:59 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:40:59 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:40:59 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:40:59 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:40:59 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:41:00 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:41:00 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:41:00 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:41:00 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:41:00 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:41:00 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:41:00 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:41:01 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:41:01 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 0
Jul 13 08:41:01 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:41:01 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 0
Jul 13 08:41:01 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:41:01 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 16
Jul 13 08:41:01 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 5
Jul 13 08:41:01 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:41:01 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:41:01 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:41:01 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 16
Jul 13 08:41:01 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 0
Jul 13 08:41:01 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:41:01 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:41:01 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:41:01 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:41:01 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:41:02 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:41:02 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:41:02 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:41:02 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:41:02 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:41:02 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:41:02 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:41:02 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:41:03 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:41:03 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:41:03 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:41:03 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:41:03 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:41:03 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:41:04 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:41:04 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:41:04 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 16
Jul 13 08:41:04 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:41:04 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 16
Jul 13 08:41:04 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:41:04 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:41:05 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:41:05 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:41:05 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:41:05 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:41:05 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 16
Jul 13 08:41:05 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:41:05 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:41:05 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:41:05 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:41:05 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:41:06 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:41:06 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:41:06 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:41:06 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:41:06 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:41:06 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:41:06 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:41:07 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:41:07 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:41:07 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:41:07 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:41:07 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:41:07 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 16
Jul 13 08:41:07 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 0
Jul 13 08:41:07 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:41:08 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 16
Jul 13 08:41:08 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:41:08 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:41:08 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:41:08 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:41:08 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:41:09 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:41:09 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:41:09 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:41:09 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:41:09 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 0
Jul 13 08:41:09 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:41:09 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:41:09 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:41:10 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 0
Jul 13 08:41:10 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 0
Jul 13 08:41:10 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:41:10 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:41:10 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:41:10 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:41:11 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:41:11 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:41:11 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:41:11 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:41:11 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:41:11 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:41:11 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:41:11 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:41:12 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:41:12 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:41:12 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:41:12 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:41:12 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:41:12 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:41:12 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:41:12 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:41:12 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 16
Jul 13 08:41:13 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:41:13 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:41:13 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 0
Jul 13 08:41:13 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:41:13 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:41:13 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:41:13 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:41:14 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:41:14 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 16
Jul 13 08:41:14 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:41:14 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:41:14 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:41:14 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:41:14 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:41:14 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:41:14 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:41:14 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:41:14 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:41:14 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 16
Jul 13 08:41:15 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:41:15 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:41:15 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:41:15 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:41:15 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:41:15 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:41:15 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:41:15 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:41:15 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:41:15 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:41:15 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:41:15 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:41:16 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:41:16 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:41:16 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:41:16 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:41:16 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:41:16 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:41:16 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 0
Jul 13 08:41:16 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:41:16 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:41:16 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 16
Jul 13 08:41:17 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 16
Jul 13 08:41:17 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:41:17 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:41:17 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:41:17 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 4
Jul 13 08:41:17 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:41:17 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 16
Jul 13 08:41:17 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:41:18 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:41:18 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:41:18 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:41:18 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:41:18 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:41:18 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 18
Jul 13 08:41:18 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 12
Jul 13 08:41:18 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:41:18 laptop last message repeated 2 times
Jul 13 08:41:19 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:41:19 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:41:19 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:41:19 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 16
Jul 13 08:41:19 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:41:19 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:41:20 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:41:20 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:41:20 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:41:20 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:41:20 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:41:20 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:41:20 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 0
Jul 13 08:41:20 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:41:21 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
Jul 13 08:41:21 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 22
Jul 13 08:41:21 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:41:21 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 10
Jul 13 08:41:21 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 6
Jul 13 08:41:21 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:41:21 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:41:21 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 14
Jul 13 08:41:21 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 20
Jul 13 08:41:21 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 2
Jul 13 08:41:21 laptop kernel: phy0 -> rt61pci_txdone: Warning - TX status report missed for entry 8
[-- Attachment #4: lspci.txt --]
[-- Type: text/plain, Size: 345 bytes --]
03:00.0 Network controller: RaLink RT2561/RT61 802.11g PCI
Subsystem: Belkin Device 701e
Flags: bus master, slow devsel, latency 64, IRQ 11
Memory at f4000000 (32-bit, non-prefetchable) [size=32K]
Capabilities: [40] Power Management version 2
Kernel driver in use: rt61pci
Kernel modules: rt61pci
[-- Attachment #5: netstat.txt --]
[-- Type: text/plain, Size: 1543 bytes --]
[chris:~]$ netstat
(Not all processes could be identified, non-owned process info
will not be shown, you would have to be root to see it all.)
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:901 0.0.0.0:* LISTEN -
tcp 0 0 0.0.0.0:37 0.0.0.0:* LISTEN -
tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN -
tcp 0 0 0.0.0.0:6000 0.0.0.0:* LISTEN -
tcp 0 0 0.0.0.0:113 0.0.0.0:* LISTEN -
tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN -
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN -
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN -
tcp 0 0 0.0.0.0:23 0.0.0.0:* LISTEN -
tcp 0 0 0.0.0.0:7100 0.0.0.0:* LISTEN -
tcp 0 0 0.0.0.0:48669 0.0.0.0:* LISTEN -
tcp 0 0 192.168.0.30:38601 192.168.0.10:21 TIME_WAIT -
udp 0 0 0.0.0.0:137 0.0.0.0:* -
udp 0 0 0.0.0.0:37 0.0.0.0:* -
udp 0 0 0.0.0.0:631 0.0.0.0:* -
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: 2.6.31-rc2: Possible regression in rt61pci driver
2009-07-13 8:27 2.6.31-rc2: Possible regression in rt61pci driver Chris Clayton
@ 2009-07-14 11:04 ` Chris Clayton
2009-07-21 11:39 ` Chris Clayton
0 siblings, 1 reply; 22+ messages in thread
From: Chris Clayton @ 2009-07-14 11:04 UTC (permalink / raw)
To: linux-wireless; +Cc: LKML
Hi again,
2009/7/13 Chris Clayton <chris2553@googlemail.com>:
> Hi,
>
> Please cc me on any reply because I'm not subscribed.
>
> I've been testing 2.6.31 development kernels on my laptop and find
> that I can induce a complete lock-up more or less at will. To do so,
> all I have to do is generate some network traffic on my wireless LAN
> (I've been using wget to transfer a file from another box on my LAN)
> and then wait. If I run netstat repeatedly while waiting, I see a TCP
> connection to port 21 on another box on my LAN in a TIME_WAIT state.
> It seems that when that connection disappears, the laptop locks up
> hard and I can only recover by powering off and on again. I think the
> problem is related to the rt61pci driver because I haven't been able
> to induce the lock-up when using a wireless card that's supported by
> the ath5k driver. I started bisecting, but a couple of times I arrived
> at points where although the kernel builds OK, I have no network
> connectivity. I guessed at good, but the bisection process finished at
> a change that can't be the culprit (because it's for a different
> architecture).
>
> I attach the best diagnostics I can think of at this point in time
> (but am more than happy to provide any others that are requested). It
> includes the output from dmesg from a boot that locked up and the
> syslog journal from that boot; a description of the wireless card from
> lspci -v and the output from netstat that shows the connection I think
> is involved. As I say, feel free to ask for any other diagnostics that
> will help track the problem down.
>
> I have confirmed that the problem is still present in a kernel built
> after a 'git pull' this morning, although it was somewhere around the
> time that -rc2 was released that I first came across it. I cannot
> induce the problem with 2.6.30.1.
I've updated to 2.6.31-rc3 this morning and done some more testing.
I'm now convinced that the rt61pci driver is somehow involved in
locking up the laptop. With the (Belkin) rt61 card inserted, the
machine will lock up even if I am doing nothing (no web browsing,
email or anything else at all) except running this script in a console
window:
i=0
while true; do
let i++
echo -n "$i "
sleep 1
done
In the tests I have done so far, the counter has never gone beyond 240
before the machine locked. With the (no-name) ath5k card inserted I
can use the laptop for normal web browsing, email, etc with no
problems - the counter in the script above gets to over 2000.
As I said yesterday, I'm happy to provide additional diagnostics,
apply patches, etc.
Thanks
Chris
--
No, Sir; there is nothing which has yet been contrived by man, by which
so much happiness is produced as by a good tavern or inn - Doctor Samuel
Johnson
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: 2.6.31-rc2: Possible regression in rt61pci driver
2009-07-14 11:04 ` Chris Clayton
@ 2009-07-21 11:39 ` Chris Clayton
2009-07-26 19:15 ` Chris Clayton
0 siblings, 1 reply; 22+ messages in thread
From: Chris Clayton @ 2009-07-21 11:39 UTC (permalink / raw)
To: linux-wireless; +Cc: LKML
[-- Attachment #1: Type: text/plain, Size: 2777 bytes --]
2009/7/14 Chris Clayton <chris2553@googlemail.com>:
<snip>
> I've updated to 2.6.31-rc3 this morning and done some more testing.
> I'm now convinced that the rt61pci driver is somehow involved in
> locking up the laptop. With the (Belkin) rt61 card inserted, the
> machine will lock up even if I am doing nothing (no web browsing,
> email or anything else at all) except running this script in a console
> window:
>
> i=0
> while true; do
> let i++
> echo -n "$i "
> sleep 1
> done
>
> In the tests I have done so far, the counter has never gone beyond 240
> before the machine locked. With the (no-name) ath5k card inserted I
> can use the laptop for normal web browsing, email, etc with no
> problems - the counter in the script above gets to over 2000.
>
The freeze still happens with 2.6.31-rc3-git5, but I've been doing
some more fact-finding.
Running the script shown above and with the rt61-based card inserted,
I can freeze the laptop even if I am doing nothing else on the laptop.
When the freeze occurs, the laptop is effectively dead, no response to
mouse movement or keyboard input and no response to pings from
another machine on my network. However, if I eject the card, the
laptop comes to life again. The key presses from when the laptop was
frozen appear on screen and pings from another machine are responded
to. The script continues to run and display the counter. I then
reinsert the card and everything appears OK until the laptop freezes
again a minute or two later. During a test run this morning the
machine froze at (from the output of the script) 80, 235, 369, 538 and
672. Each time, ejecting the card brought the machine back to life.
Trying the same test with the ath5k-based card inserted resulted in
the script getting to 2300 without the laptop freezing, at which point
I stopped the script.
I started trying to isolate the change that causes the problem by
reverting changes to the files in drivers/net/wireless/rt2x00. The
change "rt2x00: Remove last usage of beacon_int from
ieee80211_config" reverted cleanly and the kernel built OK, but I
still got the freeze. "rt2x00: Remove usage of
IEEE80211_CONF_CHANGE_BEACON_INTERVAL" also reverted cleanly but the
kernel doesn't build because of dependencies on changes to mac80211.
I'm afraid I am out of my depth now, so I will have to abandon that
line of enquiry.
I hope this new information helps track the problem down. I've
attached the output from dmesg that shows the messages emitted when I
eject the card, plus my config
Thanks,
Chris
--
No, Sir; there is nothing which has yet been contrived by man, by which
so much happiness is produced as by a good tavern or inn - Doctor Samuel
Johnson
[-- Attachment #2: rt61freeze.log --]
[-- Type: application/octet-stream, Size: 19662 bytes --]
pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
wlan0: deauthenticating by local choice (reason=3)
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
rt61pci 0000:03:00.0: PCI INT A disabled
pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
pci 0000:03:00.0: reg 10 32bit mmio: [0xffff8000-0xffffffff]
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rt61pci 0000:03:00.0: enabling device (0000 -> 0002)
rt61pci 0000:03:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
rt61pci 0000:03:00.0: setting latency timer to 64
phy0 -> rt61pci_validate_eeprom: EEPROM recovery - NIC: 0xff80
phy0 -> rt61pci_validate_eeprom: EEPROM recovery - Led: 0xe0ff
phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 0301, rf: 0003, rev: 0002561c.
phy0: Selected rate control algorithm 'minstrel'
Registered led device: rt61pci-phy0::radio
Registered led device: rt61pci-phy0::assoc
phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561s.bin'.
rt61pci 0000:03:00.0: firmware: requesting rt2561s.bin
phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
wlan0: authenticate with AP 00:1f:33:80:09:44
wlan0: authenticated
wlan0: associate with AP 00:1f:33:80:09:44
wlan0: RX AssocResp from 00:1f:33:80:09:44 (capab=0x431 status=0 aid=1)
wlan0: associated
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
cfg80211: Calling CRDA for country: GB
cfg80211: Regulatory domain changed to country: GB
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
wlan0: deauthenticating by local choice (reason=3)
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
rt61pci 0000:03:00.0: PCI INT A disabled
pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
pci 0000:03:00.0: reg 10 32bit mmio: [0xffff8000-0xffffffff]
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rt61pci 0000:03:00.0: enabling device (0000 -> 0002)
rt61pci 0000:03:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
rt61pci 0000:03:00.0: setting latency timer to 64
phy0 -> rt61pci_validate_eeprom: EEPROM recovery - NIC: 0xff80
phy0 -> rt61pci_validate_eeprom: EEPROM recovery - Led: 0xe0ff
phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 0301, rf: 0003, rev: 0002561c.
phy0: Selected rate control algorithm 'minstrel'
Registered led device: rt61pci-phy0::radio
Registered led device: rt61pci-phy0::assoc
phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561s.bin'.
rt61pci 0000:03:00.0: firmware: requesting rt2561s.bin
phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
wlan0: authenticate with AP 00:1f:33:80:09:44
wlan0: authenticated
wlan0: associate with AP 00:1f:33:80:09:44
wlan0: RX AssocResp from 00:1f:33:80:09:44 (capab=0x431 status=0 aid=1)
wlan0: associated
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
cfg80211: Calling CRDA for country: GB
cfg80211: Regulatory domain changed to country: GB
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
wlan0: deauthenticating by local choice (reason=3)
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
rt61pci 0000:03:00.0: PCI INT A disabled
pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
pci 0000:03:00.0: reg 10 32bit mmio: [0xffff8000-0xffffffff]
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rt61pci 0000:03:00.0: enabling device (0000 -> 0002)
rt61pci 0000:03:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
rt61pci 0000:03:00.0: setting latency timer to 64
phy0 -> rt61pci_validate_eeprom: EEPROM recovery - NIC: 0xff80
phy0 -> rt61pci_validate_eeprom: EEPROM recovery - Led: 0xe0ff
phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 0301, rf: 0003, rev: 0002561c.
phy0: Selected rate control algorithm 'minstrel'
Registered led device: rt61pci-phy0::radio
Registered led device: rt61pci-phy0::assoc
phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561s.bin'.
rt61pci 0000:03:00.0: firmware: requesting rt2561s.bin
phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
wlan0: authenticate with AP 00:1f:33:80:09:44
wlan0: authenticated
wlan0: associate with AP 00:1f:33:80:09:44
wlan0: RX AssocResp from 00:1f:33:80:09:44 (capab=0x431 status=0 aid=1)
wlan0: associated
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
cfg80211: Calling CRDA for country: GB
cfg80211: Regulatory domain changed to country: GB
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
BUG: soft lockup - CPU#0 stuck for 61s! [kded:1323]
Modules linked in: rt61pci crc_itu_t rt2x00pci rt2x00lib led_class input_polldev mac80211 cfg80211 eeprom_93cx6 radeon xt_state iptable_filter ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables x_tables af_packet arc4 ecb ohci_hcd usbhid uhci_hcd ehci_hcd usbcore yenta_socket psmouse rsrc_nonstatic floppy pcmcia_core [last unloaded: eeprom_93cx6]
Pid: 1323, comm: kded Tainted: G W (2.6.31-rc3 #240) Latitude C610
EIP: 0060:[<e0ee65c9>] EFLAGS: 00200286 CPU: 0
EIP is at radeon_driver_irq_handler+0x29/0x1a0 [radeon]
EAX: e0f40044 EBX: dfb5d800 ECX: 00080006 EDX: dfb5cc00
ESI: 00000000 EDI: 00000000 EBP: dfb5cc00 ESP: c1371fb8
DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
CR0: 8005003b CR2: 0812fed8 CR3: 1c6ec000 CR4: 000006d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
Call Trace:
[<c10510f5>] ? handle_IRQ_event+0x35/0xc0
[<c105298c>] ? handle_level_irq+0x6c/0x100
[<c1052920>] ? handle_level_irq+0x0/0x100
<IRQ> [<c1004aca>] ? do_IRQ+0x3a/0xb0
[<c10351a9>] ? queue_work_on+0x29/0x40
[<c102a2d0>] ? __do_softirq+0x0/0xf0
[<c1003469>] ? common_interrupt+0x29/0x30
[<c102a2d0>] ? __do_softirq+0x0/0xf0
[<c102a30d>] ? __do_softirq+0x3d/0xf0
[<c102a2d0>] ? __do_softirq+0x0/0xf0
<IRQ> [<c102a0c5>] ? irq_exit+0x65/0x80
[<c1004ad3>] ? do_IRQ+0x43/0xb0
[<c108e1d0>] ? sys_select+0x40/0xb0
[<c1003469>] ? common_interrupt+0x29/0x30
pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
wlan0: deauthenticating by local choice (reason=3)
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
rt61pci 0000:03:00.0: PCI INT A disabled
pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
pci 0000:03:00.0: reg 10 32bit mmio: [0xffff8000-0xffffffff]
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rt61pci 0000:03:00.0: enabling device (0000 -> 0002)
rt61pci 0000:03:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
rt61pci 0000:03:00.0: setting latency timer to 64
phy0 -> rt61pci_validate_eeprom: EEPROM recovery - NIC: 0xff80
phy0 -> rt61pci_validate_eeprom: EEPROM recovery - Led: 0xe0ff
phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 0301, rf: 0003, rev: 0002561c.
phy0: Selected rate control algorithm 'minstrel'
Registered led device: rt61pci-phy0::radio
Registered led device: rt61pci-phy0::assoc
phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561s.bin'.
rt61pci 0000:03:00.0: firmware: requesting rt2561s.bin
phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
wlan0: authenticate with AP 00:1f:33:80:09:44
wlan0: authenticated
wlan0: associate with AP 00:1f:33:80:09:44
wlan0: RX AssocResp from 00:1f:33:80:09:44 (capab=0x431 status=0 aid=1)
wlan0: associated
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
cfg80211: Calling CRDA for country: GB
cfg80211: Regulatory domain changed to country: GB
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
wlan0: deauthenticating by local choice (reason=3)
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
rt61pci 0000:03:00.0: PCI INT A disabled
[-- Attachment #3: .config --]
[-- Type: application/octet-stream, Size: 50425 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.31-rc3
# Tue Jul 21 09:33:55 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=16
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_COUNTERS=y
#
# Performance Counters
#
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=1
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_OLD_MCE is not set
CONFIG_X86_NEW_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_X86_CPU_DEBUG is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_X86_PAE is not set
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
#
# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=m
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_SIP=m
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_NETFILTER_XT_MATCH_STATE=m
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=m
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
# CONFIG_IRLAN is not set
# CONFIG_IRCOMM is not set
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
# CONFIG_DONGLE is not set
# CONFIG_KINGSUN_DONGLE is not set
# CONFIG_KSDAZZLE_DONGLE is not set
# CONFIG_KS959_DONGLE is not set
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
CONFIG_SIGMATEL_FIR=m
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_TOSHIBA_FIR is not set
CONFIG_SMC_IRCC_FIR=m
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
# CONFIG_VIA_FIR is not set
# CONFIG_MCS_FIR is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_DEFAULT_PS=y
CONFIG_MAC80211_DEFAULT_PS_VALUE=1
#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_EEPROM_93CX6=m
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=m
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_CS5536 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
#
# Other IDE chipsets support
#
#
# Note: most of these also require special kernel boot parameters
#
# CONFIG_BLK_DEV_4DRIVES is not set
# CONFIG_BLK_DEV_ALI14XX is not set
# CONFIG_BLK_DEV_DTC2278 is not set
# CONFIG_BLK_DEV_HT6560B is not set
# CONFIG_BLK_DEV_QD65XX is not set
# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_KS8842 is not set
# CONFIG_NET_POCKET is not set
# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
CONFIG_ATH_COMMON=m
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH9K is not set
# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
CONFIG_RT2X00=m
# CONFIG_RT2400PCI is not set
# CONFIG_RT2500PCI is not set
CONFIG_RT61PCI=m
# CONFIG_RT2500USB is not set
# CONFIG_RT73USB is not set
# CONFIG_RT2800USB is not set
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_RFKILL=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2X00_DEBUG=y
# CONFIG_HERMES is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=128
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_PCA_ISA is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_SCx200_ACB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_PCM_OSS_PLUGINS is not set
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
# CONFIG_SND_ISA is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=m
CONFIG_HID_KYE=m
CONFIG_HID_GYRATION=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_NTRIG=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# Enable Host or Gadget support to see Inventra options
#
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_4KSTACKS=y
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_IMA is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
# CONFIG_VIRTUALIZATION is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: 2.6.31-rc2: Possible regression in rt61pci driver
2009-07-21 11:39 ` Chris Clayton
@ 2009-07-26 19:15 ` Chris Clayton
2009-07-26 20:10 ` Pavel Roskin
0 siblings, 1 reply; 22+ messages in thread
From: Chris Clayton @ 2009-07-26 19:15 UTC (permalink / raw)
To: linux-wireless; +Cc: LKML, linville
2009/7/21 Chris Clayton <chris2553@googlemail.com>:
> 2009/7/14 Chris Clayton <chris2553@googlemail.com>:
> <snip>
>
>> I've updated to 2.6.31-rc3 this morning and done some more testing.
>> I'm now convinced that the rt61pci driver is somehow involved in
>> locking up the laptop. With the (Belkin) rt61 card inserted, the
>> machine will lock up even if I am doing nothing (no web browsing,
>> email or anything else at all) except running this script in a console
>> window:
>>
>> i=0
>> while true; do
>> let i++
>> echo -n "$i "
>> sleep 1
>> done
>>
>> In the tests I have done so far, the counter has never gone beyond 240
>> before the machine locked. With the (no-name) ath5k card inserted I
>> can use the laptop for normal web browsing, email, etc with no
>> problems - the counter in the script above gets to over 2000.
>>
>
> The freeze still happens with 2.6.31-rc3-git5, but I've been doing
> some more fact-finding.
>
> Running the script shown above and with the rt61-based card inserted,
> I can freeze the laptop even if I am doing nothing else on the laptop.
> When the freeze occurs, the laptop is effectively dead, no response to
> mouse movement or keyboard input and no response to pings from
> another machine on my network. However, if I eject the card, the
> laptop comes to life again. The key presses from when the laptop was
> frozen appear on screen and pings from another machine are responded
> to. The script continues to run and display the counter. I then
> reinsert the card and everything appears OK until the laptop freezes
> again a minute or two later. During a test run this morning the
> machine froze at (from the output of the script) 80, 235, 369, 538 and
> 672. Each time, ejecting the card brought the machine back to life.
>
> Trying the same test with the ath5k-based card inserted resulted in
> the script getting to 2300 without the laptop freezing, at which point
> I stopped the script.
>
One more data point. I wondered whether the freeze would "time out" if
I just left the laptop frozen, but my testing shows that it probably
does not (or if it does it takes more than 27 minutes to do so.
I've also tried to bisect again, but, as last time, once I got to the
batch of network-related changes that went into -rc1, I get a series
of kernels that build but either won't boot or have inoperable
wireless networking.
Finally, since I haven't had a single reply to the regression report I
posted almost two weeks ago, I now give up. I'll switch to using the
card supported by the ath5k driver.
<snip>
Chris
--
No, Sir; there is nothing which has yet been contrived by man, by
which so much happiness is produced as by a good tavern or inn -
Doctor Samuel Johnson
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: 2.6.31-rc2: Possible regression in rt61pci driver
2009-07-26 19:15 ` Chris Clayton
@ 2009-07-26 20:10 ` Pavel Roskin
2009-07-26 21:33 ` Chris Clayton
0 siblings, 1 reply; 22+ messages in thread
From: Pavel Roskin @ 2009-07-26 20:10 UTC (permalink / raw)
To: Chris Clayton; +Cc: linux-wireless, LKML, linville
On Sun, 2009-07-26 at 20:15 +0100, Chris Clayton wrote:
> One more data point. I wondered whether the freeze would "time out" if
> I just left the laptop frozen, but my testing shows that it probably
> does not (or if it does it takes more than 27 minutes to do so.
I suggest that you run it on the text console after "dmesg -n 8", so
that all kernel messages are seen.
I'm using rt61pci with wireless-testing, and I don't see any freezes.
> I've also tried to bisect again, but, as last time, once I got to the
> batch of network-related changes that went into -rc1, I get a series
> of kernels that build but either won't boot or have inoperable
> wireless networking.
You can use "git bisect skip" to skip those revisions.
You can specify the paths in "git bisect start" so that only changes to
the interesting places (like drivers/net wireless, net/mac80211 and
net/wireless) are considered when calculating the next commit. This
will probably help you avoid the bad place.
Also, please try the current wireless-testing. The problem may be fixed
there.
> Finally, since I haven't had a single reply to the regression report I
> posted almost two weeks ago, I now give up. I'll switch to using the
> card supported by the ath5k driver.
Perhaps there was not enough material for others to comment on, and
nobody was experiencing anything similar.
If I had such problem, I would try to bisect it, but I cannot reproduce
it.
--
Regards,
Pavel Roskin
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: 2.6.31-rc2: Possible regression in rt61pci driver
2009-07-26 20:10 ` Pavel Roskin
@ 2009-07-26 21:33 ` Chris Clayton
2009-07-27 0:06 ` Pavel Roskin
0 siblings, 1 reply; 22+ messages in thread
From: Chris Clayton @ 2009-07-26 21:33 UTC (permalink / raw)
To: Pavel Roskin; +Cc: linux-wireless, LKML, linville
Thanks for the reply, Pavel.
2009/7/26 Pavel Roskin <proski@gnu.org>:
> On Sun, 2009-07-26 at 20:15 +0100, Chris Clayton wrote:
>
>> One more data point. I wondered whether the freeze would "time out" if
>> I just left the laptop frozen, but my testing shows that it probably
>> does not (or if it does it takes more than 27 minutes to do so.
>
> I suggest that you run it on the text console after "dmesg -n 8", so
> that all kernel messages are seen.
>
> I'm using rt61pci with wireless-testing, and I don't see any freezes.
Do you have CONFIG_MAC80211_DEFAULT_PS enabled? I have just built and
installed -rc4 with this option disabled and it has survived almost 20
minutes so far without a freeze. No previous kernel in the 2.6.31
series has survived more than 5 minutes without freezing, so this
looks promising.
>
>> I've also tried to bisect again, but, as last time, once I got to the
>> batch of network-related changes that went into -rc1, I get a series
>> of kernels that build but either won't boot or have inoperable
>> wireless networking.
>
> You can use "git bisect skip" to skip those revisions.
>
> You can specify the paths in "git bisect start" so that only changes to
> the interesting places (like drivers/net wireless, net/mac80211 and
> net/wireless) are considered when calculating the next commit. This
> will probably help you avoid the bad place.
>
Thanks for those tips. I'll note them in my "useful stuff I might
forget" notebook and then try to find time over the next few weeks to
get to grips with the power of git.
Chris
--
No, Sir; there is nothing which has yet been contrived by man, by which
so much happiness is produced as by a good tavern or inn - Doctor Samuel
Johnson
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: 2.6.31-rc2: Possible regression in rt61pci driver
2009-07-26 21:33 ` Chris Clayton
@ 2009-07-27 0:06 ` Pavel Roskin
2009-07-27 9:35 ` Chris Clayton
0 siblings, 1 reply; 22+ messages in thread
From: Pavel Roskin @ 2009-07-27 0:06 UTC (permalink / raw)
To: Chris Clayton; +Cc: linux-wireless
On Sun, 2009-07-26 at 22:33 +0100, Chris Clayton wrote:
> Do you have CONFIG_MAC80211_DEFAULT_PS enabled?
No. That may explain everything. I'll try enabling
CONFIG_MAC80211_DEFAULT_PS.
--
Regards,
Pavel Roskin
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: 2.6.31-rc2: Possible regression in rt61pci driver
2009-07-27 0:06 ` Pavel Roskin
@ 2009-07-27 9:35 ` Chris Clayton
2009-07-27 14:27 ` Pavel Roskin
0 siblings, 1 reply; 22+ messages in thread
From: Chris Clayton @ 2009-07-27 9:35 UTC (permalink / raw)
To: Pavel Roskin; +Cc: linux-wireless
[-- Attachment #1: Type: text/plain, Size: 945 bytes --]
2009/7/27 Pavel Roskin <proski@gnu.org>:
> On Sun, 2009-07-26 at 22:33 +0100, Chris Clayton wrote:
>
>> Do you have CONFIG_MAC80211_DEFAULT_PS enabled?
>
> No. That may explain everything. I'll try enabling
> CONFIG_MAC80211_DEFAULT_PS.
>
I've built and installed a kernel with all the various types of
MAC80211 debugging turned on (in addition to the RT61 driver's) and
with CONFIG_MAC80211_DEFAULT_PS enabled. The attached file is the
output from dmesg just after a freeze occurs. (The pcmcia card eject
represents me ejecting the wireless card, so that the freeze "thaws"
and I can capture the output from dmesg).
Let me know if any additional diagnostics are needed. I have enabled
MAC80211 debugfs too.
Chris
> --
> Regards,
> Pavel Roskin
>
--
No, Sir; there is nothing which has yet been contrived by man, by which
so much happiness is produced as by a good tavern or inn - Doctor Samuel
Johnson
[-- Attachment #2: freeze.dmesg.txt --]
[-- Type: text/plain, Size: 39962 bytes --]
[ 0.000000] Linux version 2.6.31-rc4 (chris@laptop) (gcc version 4.3.4 20090719 (prerelease) (GCC) ) #264 PREEMPT Mon Jul 27 10:04:05 BST 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000100 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffe2800 (usable)
[ 0.000000] BIOS-e820: 000000001ffe2800 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x1ffe2 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 0FEDA0000 mask FFFFE0000 write-through
[ 0.000000] 2 disabled
[ 0.000000] 3 base 0D0000000 mask FF0000000 write-combining
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-000000001ffe2000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001fc00000 page 2M
[ 0.000000] 001fc00000 - 001ffe2000 page 4k
[ 0.000000] kernel direct mapping tables up to 1ffe2000 @ 7000-c000
[ 0.000000] ACPI: RSDP 000fde50 00014 (v00 DELL )
[ 0.000000] ACPI: RSDT 000fde64 00028 (v01 DELL CPi R 27D20811 ASL 00000061)
[ 0.000000] ACPI: FACP 000fde90 00074 (v01 DELL CPi R 27D20811 ASL 00000061)
[ 0.000000] ACPI: DSDT fffe4000 0317A (v01 INT430 SYSFexxx 00001001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 1ffff800 00040
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1ffe2000
[ 0.000000] low ram: 0 - 1ffe2000
[ 0.000000] node 0 low ram: 00000000 - 1ffe2000
[ 0.000000] node 0 bootmap 00001000 - 00005000
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 001ffe2000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0001000000 - 00013effc4] TEXT DATA BSS ==> [0001000000 - 00013effc4]
[ 0.000000] #2 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #3 [00013f0000 - 00013f6198] BRK ==> [00013f0000 - 00013f6198]
[ 0.000000] #4 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #5 [0000001000 - 0000005000] BOOTMAP ==> [0000001000 - 0000005000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001ffe2
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001ffe2
[ 0.000000] On node 0 totalpages: 130944
[ 0.000000] free_area_init_node: node 0, pgdat c1370a80, node_mem_map c13f7020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3966 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125954 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:deda0000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920
[ 0.000000] Kernel command line: root=/dev/hda2 ro noirda resume=/dev/hda3
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Memory: 515172k/524168k available (2568k kernel code, 8576k reserved, 992k data, 276k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa4000 - 0xfffff000 ( 364 kB)
[ 0.000000] vmalloc : 0xe07e2000 - 0xfffa2000 ( 503 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdffe2000 ( 511 MB)
[ 0.000000] .init : 0xc137c000 - 0xc13c1000 ( 276 kB)
[ 0.000000] .data : 0xc12822a9 - 0xc137a3a8 ( 992 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12822a9 (2568 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:288
[ 0.000000] CPU 0 irqstacks, hard=c1373000 soft=c1374000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 996.687 MHz processor.
[ 0.001250] Console: colour VGA+ 80x25
[ 0.001257] console [tty0] enabled
[ 0.003512] Calibrating delay loop (skipped), value calculated using timer frequency.. 1993.37 BogoMIPS (lpj=3986748)
[ 0.003607] Mount-cache hash table entries: 512
[ 0.003862] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.003917] CPU: L2 cache: 512K
[ 0.003952] mce: CPU supports 5 MCE banks
[ 0.004000] CPU: Mobile Intel(R) Pentium(R) III CPU - M 1000MHz stepping 04
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.016657] ACPI: Core revision 20090521
[ 0.064110] ACPI: setting ELCR to 0200 (from 0a20)
[ 0.064978] NET: Registered protocol family 16
[ 0.065189] ACPI: bus type pci registered
[ 0.087852] PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=2
[ 0.087892] PCI: Using configuration type 1 for base access
[ 0.089077] bio: create slab <bio-0> at 0
[ 0.089834] ACPI: EC: Look up EC in DSDT
[ 0.130345] ACPI: Interpreter enabled
[ 0.130391] ACPI: (supports S0 S1 S3 S5)
[ 0.130528] ACPI: Using PIC for interrupt routing
[ 0.194183] ACPI: Power Resource [PADA] (on)
[ 0.218430] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.218535] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.218650] pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f]
[ 0.218744] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 0.218794] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO
[ 0.218856] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.218866] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.218877] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
[ 0.218887] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
[ 0.218897] pci 0000:00:1f.1: reg 20 io port: [0xbfa0-0xbfaf]
[ 0.218907] pci 0000:00:1f.1: reg 24 32bit mmio: [0x3a000000-0x3a0003ff]
[ 0.218946] pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd8ff]
[ 0.218956] pci 0000:00:1f.5: reg 14 io port: [0xdc80-0xdcbf]
[ 0.219008] pci 0000:00:1f.6: reg 10 io port: [0xd400-0xd4ff]
[ 0.219018] pci 0000:00:1f.6: reg 14 io port: [0xdc00-0xdc7f]
[ 0.219081] pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff]
[ 0.219090] pci 0000:01:00.0: reg 14 io port: [0xc000-0xc0ff]
[ 0.219100] pci 0000:01:00.0: reg 18 32bit mmio: [0xfcff0000-0xfcffffff]
[ 0.219116] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.219136] pci 0000:01:00.0: supports D1 D2
[ 0.219170] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
[ 0.219177] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfdffffff]
[ 0.219184] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff]
[ 0.219221] pci 0000:02:00.0: reg 10 io port: [0xec80-0xecff]
[ 0.219231] pci 0000:02:00.0: reg 14 32bit mmio: [0xf8fffc00-0xf8fffc7f]
[ 0.219255] pci 0000:02:00.0: reg 30 32bit mmio: [0xf9000000-0xf901ffff]
[ 0.219273] pci 0000:02:00.0: supports D1 D2
[ 0.219279] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.219320] pci 0000:02:00.0: PME# disabled
[ 0.219384] pci 0000:02:01.0: reg 10 32bit mmio: [0xf8000000-0xf8000fff]
[ 0.219404] pci 0000:02:01.0: supports D1 D2
[ 0.219409] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.219449] pci 0000:02:01.0: PME# disabled
[ 0.219513] pci 0000:02:01.1: reg 10 32bit mmio: [0xf8001000-0xf8001fff]
[ 0.219533] pci 0000:02:01.1: supports D1 D2
[ 0.219539] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.219578] pci 0000:02:01.1: PME# disabled
[ 0.219651] pci 0000:00:1e.0: transparent bridge
[ 0.219688] pci 0000:00:1e.0: bridge io port: [0xe000-0xffff]
[ 0.219696] pci 0000:00:1e.0: bridge 32bit mmio: [0xf4000000-0xfbffffff]
[ 0.219704] pci 0000:00:1e.0: bridge 32bit mmio pref: [0x30000000-0x39ffffff]
[ 0.219746] pci_bus 0000:00: on NUMA node 0
[ 0.219755] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.219947] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.219990] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.256439] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 0.257010] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
[ 0.257560] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
[ 0.258131] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
[ 0.258665] SCSI subsystem initialized
[ 0.258830] PCI: Using ACPI for IRQ routing
[ 0.259124] pnp: PnP ACPI init
[ 0.259170] ACPI: bus type pnp registered
[ 0.302804] pnp 00:02: io resource (0x800-0x805) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 0.302857] pnp 00:02: io resource (0x808-0x80f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 0.303046] pnp 00:03: io resource (0x806-0x807) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 0.303098] pnp 00:03: io resource (0x810-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 0.303149] pnp 00:03: io resource (0x860-0x87f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 0.304195] pnp 00:04: io resource (0xf000-0xf0fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
[ 0.304247] pnp 00:04: io resource (0xf100-0xf1fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
[ 0.304298] pnp 00:04: io resource (0xf200-0xf2fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
[ 0.304349] pnp 00:04: io resource (0xf400-0xf4fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
[ 0.304401] pnp 00:04: io resource (0xf500-0xf5fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
[ 0.304451] pnp 00:04: io resource (0xf600-0xf6fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
[ 0.304502] pnp 00:04: io resource (0xf800-0xf8fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
[ 0.304553] pnp 00:04: io resource (0xf900-0xf9fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
[ 0.304604] pnp 00:04: io resource (0xfa00-0xfafe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
[ 0.304654] pnp 00:04: io resource (0xfc00-0xfcfe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
[ 0.304705] pnp 00:04: io resource (0xfd00-0xfdfe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
[ 0.304756] pnp 00:04: io resource (0xfe00-0xfefe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
[ 0.304807] pnp 00:04: mem resource (0xfa000000-0xfbffffff) overlaps 0000:00:1e.0 BAR 8 (0xf4000000-0xfbffffff), disabling
[ 0.407311] pnp: PnP ACPI: found 18 devices
[ 0.407347] ACPI: ACPI bus type pnp unregistered
[ 0.407397] system 00:00: iomem range 0x0-0x9fbff could not be reserved
[ 0.407438] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[ 0.407479] system 00:00: iomem range 0xc0000-0xcffff could not be reserved
[ 0.407519] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.407559] system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved
[ 0.407606] system 00:00: iomem range 0x1fff0000-0x1fffffff has been reserved
[ 0.407646] system 00:00: iomem range 0xfeda0000-0xfedfffff has been reserved
[ 0.407686] system 00:00: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.407734] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.407780] system 00:03: ioport range 0x880-0x8bf has been reserved
[ 0.407819] system 00:03: ioport range 0x8c0-0x8df has been reserved
[ 0.407858] system 00:03: ioport range 0x8e0-0x8ff has been reserved
[ 0.407911] system 00:09: ioport range 0x900-0x91f has been reserved
[ 0.407950] system 00:09: ioport range 0x3f0-0x3f1 has been reserved
[ 0.407998] system 00:10: ioport range 0xbf40-0xbf5f has been reserved
[ 0.408048] system 00:10: ioport range 0xbf20-0xbf3f has been reserved
[ 0.408095] system 00:11: iomem range 0xfebffc00-0xfebfffff has been reserved
[ 0.442871] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.442910] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.442949] pci 0000:00:01.0: MEM window: 0xfc000000-0xfdffffff
[ 0.442988] pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xe7ffffff
[ 0.443033] pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03
[ 0.443071] pci 0000:02:01.0: IO window: 0x00e000-0x00e0ff
[ 0.443110] pci 0000:02:01.0: IO window: 0x00e400-0x00e4ff
[ 0.443149] pci 0000:02:01.0: PREFETCH window: 0x30000000-0x33ffffff
[ 0.443189] pci 0000:02:01.0: MEM window: 0xf4000000-0xf7ffffff
[ 0.443227] pci 0000:02:01.1: CardBus bridge, secondary bus 0000:07
[ 0.443265] pci 0000:02:01.1: IO window: 0x00e800-0x00e8ff
[ 0.443303] pci 0000:02:01.1: IO window: 0x00f000-0x00f0ff
[ 0.443342] pci 0000:02:01.1: PREFETCH window: 0x34000000-0x37ffffff
[ 0.443381] pci 0000:02:01.1: MEM window: 0x20000000-0x23ffffff
[ 0.443420] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.443458] pci 0000:00:1e.0: IO window: 0xe000-0xffff
[ 0.443497] pci 0000:00:1e.0: MEM window: 0xf4000000-0xfbffffff
[ 0.443536] pci 0000:00:1e.0: PREFETCH window: 0x30000000-0x39ffffff
[ 0.443588] pci 0000:00:1e.0: setting latency timer to 64
[ 0.444188] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.444227] PCI: setting IRQ 11 as level-triggered
[ 0.444235] pci 0000:02:01.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 0.444292] pci 0000:02:01.1: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 0.445484] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.445491] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.445497] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.445504] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfdffffff]
[ 0.445510] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff]
[ 0.445517] pci_bus 0000:02: resource 0 io: [0xe000-0xffff]
[ 0.445523] pci_bus 0000:02: resource 1 mem: [0xf4000000-0xfbffffff]
[ 0.445529] pci_bus 0000:02: resource 2 pref mem [0x30000000-0x39ffffff]
[ 0.445535] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.445541] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.445547] pci_bus 0000:03: resource 0 io: [0xe000-0xe0ff]
[ 0.445553] pci_bus 0000:03: resource 1 io: [0xe400-0xe4ff]
[ 0.445559] pci_bus 0000:03: resource 2 pref mem [0x30000000-0x33ffffff]
[ 0.445565] pci_bus 0000:03: resource 3 mem: [0xf4000000-0xf7ffffff]
[ 0.445572] pci_bus 0000:07: resource 0 io: [0xe800-0xe8ff]
[ 0.445577] pci_bus 0000:07: resource 1 io: [0xf000-0xf0ff]
[ 0.445584] pci_bus 0000:07: resource 2 pref mem [0x34000000-0x37ffffff]
[ 0.445590] pci_bus 0000:07: resource 3 mem: [0x20000000-0x23ffffff]
[ 0.445656] NET: Registered protocol family 2
[ 0.445891] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.446536] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.446872] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.447062] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.447101] TCP reno registered
[ 0.447251] NET: Registered protocol family 1
[ 0.451763] msgmni has been set to 1006
[ 0.453499] alg: No test for stdrng (krng)
[ 0.453597] io scheduler noop registered
[ 0.453807] io scheduler cfq registered (default)
[ 0.453899] pci 0000:01:00.0: Boot video device
[ 0.454870] ACPI: AC Adapter [AC] (on-line)
[ 0.455069] input: Lid Switch as /class/input/input0
[ 0.455778] ACPI: Lid Switch [LID]
[ 0.455909] input: Power Button as /class/input/input1
[ 0.455948] ACPI: Power Button [PBTN]
[ 0.456113] input: Sleep Button as /class/input/input2
[ 0.456151] ACPI: Sleep Button [SBTN]
[ 0.456318] Marking TSC unstable due to TSC halts in idle
[ 0.456390] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.456541] processor LNXCPU:00: registered as cooling_device0
[ 0.462676] Switched to NOHz mode on CPU #0
[ 0.472862] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.472910] ACPI: Thermal Zone [THM] (60 C)
[ 0.472981] isapnp: Scanning for PnP cards...
[ 0.825574] isapnp: No Plug & Play device found
[ 0.839385] Real Time Clock Driver v1.12b
[ 0.839428] Linux agpgart interface v0.103
[ 0.839508] agpgart-intel 0000:00:00.0: Intel 830M Chipset
[ 0.854729] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.854876] [drm] Initialized drm 1.1.0 20060810
[ 0.854913] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.855061] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.855285] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.855550] Platform driver 'serial8250' needs updating - please use dev_pm_ops
[ 0.856223] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.960554] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 0.960594] PCI: setting IRQ 5 as level-triggered
[ 0.960603] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 0.960656] serial 0000:00:1f.6: PCI INT B disabled
[ 0.960779] Uniform Multi-Platform E-IDE driver
[ 0.960872] piix 0000:00:1f.1: IDE controller (0x8086:0x248a rev 0x02)
[ 0.961485] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.961526] pci 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.961597] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 0.961642] ide0: BM-DMA at 0xbfa0-0xbfa7
[ 0.961694] ide1: BM-DMA at 0xbfa8-0xbfaf
[ 0.961741] Probing IDE interface ide0...
[ 1.241796] ACPI: Battery Slot [BAT0] (battery present)
[ 1.241944] ACPI: Battery Slot [BAT1] (battery absent)
[ 1.248248] hda: SAMSUNG HM160HC, ATA DISK drive
[ 1.920082] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 1.920174] hda: UDMA/100 mode selected
[ 1.920282] Probing IDE interface ide1...
[ 2.656244] hdc: HL-DT-ST DVD+/-RW GSA-T11N, ATAPI CD/DVD-ROM drive
[ 2.992077] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.992868] hdc: UDMA/33 mode selected
[ 2.993390] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.993471] ide1 at 0x170-0x177,0x376 on irq 15
[ 2.993673] ide-gd driver 1.18
[ 2.993735] hda: max request size: 512KiB
[ 3.053963] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
[ 3.055962] hda: cache flushes supported
[ 3.056050] hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
[ 3.125042] ide-cd driver 5.00
[ 3.127164] ide-cd: hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 3.127318] Uniform CD-ROM driver Revision: 3.20
[ 3.141517] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.141640] Platform driver 'i8042' needs updating - please use dev_pm_ops
[ 3.146324] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.146366] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.146564] mice: PS/2 mouse device common for all mice
[ 3.146725] input: PC Speaker as /class/input/input3
[ 3.146865] cpuidle: using governor ladder
[ 3.147017] cpuidle: using governor menu
[ 3.147123] Advanced Linux Sound Architecture Driver Version 1.0.20.
[ 3.147265] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 3.147333] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 3.151009] input: AT Translated Set 2 keyboard as /class/input/input4
[ 3.440327] Clocksource tsc unstable (delta = -261036248 ns)
[ 3.904060] intel8x0_measure_ac97_clock: measured 55213 usecs (2654 samples)
[ 3.904101] intel8x0: clocking to 48000
[ 3.905496] ALSA device list:
[ 3.905530] #0: Intel 82801CA-ICH3 with CS4205 at irq 5
[ 3.906432] TCP cubic registered
[ 3.906469] NET: Registered protocol family 15
[ 3.906545] Using IPI Shortcut mode
[ 3.981763] kjournald starting. Commit interval 5 seconds
[ 3.981819] EXT3-fs: mounted filesystem with writeback data mode.
[ 3.981872] VFS: Mounted root (ext3 filesystem) readonly on device 3:2.
[ 3.981953] Freeing unused kernel memory: 276k freed
[ 4.708069] EXT3 FS on hda2, internal journal
[ 6.217575] Platform driver 'floppy' needs updating - please use dev_pm_ops
[ 6.217685] Floppy drive(s): fd0 is 1.44M
[ 6.233868] FDC 0 is a post-1991 82077
[ 6.367866] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 6.367920] 3c59x 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 6.367983] 3c59x: Donald Becker and others.
[ 6.368026] 0000:02:00.0: 3Com PCI 3c905C Tornado at e08ecc00.
[ 6.399849] yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:00e3]
[ 6.399914] yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI
[ 6.399960] yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI
[ 6.400001] yenta_cardbus 0000:02:01.0: TI: mfunc 0x01261222, devctl 0x64
[ 6.419838] usbcore: registered new interface driver usbfs
[ 6.419934] usbcore: registered new interface driver hub
[ 6.420017] usbcore: registered new device driver usb
[ 6.445941] NET: Registered protocol family 23
[ 6.491110] Platform driver 'smsc-ircc2' needs updating - please use dev_pm_ops
[ 6.491270] found SMC SuperIO Chip (devid=0x0e rev=01 base=0x002e): LPC47N252
[ 6.491325] smsc_ircc_present: can't get sir_base of 0x2f8
[ 6.502951] Platform driver 'smsc-ircc2' needs updating - please use dev_pm_ops
[ 6.503106] found SMC SuperIO Chip (devid=0x0e rev=01 base=0x002e): LPC47N252
[ 6.503160] smsc_ircc_present: can't get sir_base of 0x2f8
[ 6.547500] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.571108] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.571269] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 6.571330] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 6.571338] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 6.571440] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 6.571519] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
[ 6.571631] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.571671] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.571717] usb usb1: Product: UHCI Host Controller
[ 6.571753] usb usb1: Manufacturer: Linux 2.6.31-rc4 uhci_hcd
[ 6.571789] usb usb1: SerialNumber: 0000:00:1d.0
[ 6.572055] usb usb1: configuration #1 chosen from 1 choice
[ 6.572157] hub 1-0:1.0: USB hub found
[ 6.572202] hub 1-0:1.0: 2 ports detected
[ 6.628924] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0498, PCI irq 11
[ 6.628975] yenta_cardbus 0000:02:01.0: Socket status: 30000006
[ 6.629022] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
[ 6.629073] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xe000-0xffff: clean.
[ 6.630019] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
[ 6.630070] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x39ffffff
[ 6.630404] yenta_cardbus 0000:02:01.1: CardBus bridge found [1028:00e3]
[ 6.630457] yenta_cardbus 0000:02:01.1: Using CSCINT to route CSC interrupts to PCI
[ 6.630503] yenta_cardbus 0000:02:01.1: Routing CardBus interrupts to PCI
[ 6.630544] yenta_cardbus 0000:02:01.1: TI: mfunc 0x01261222, devctl 0x64
[ 6.665509] parport_pc 00:0f: activated
[ 6.665564] parport_pc 00:0f: reported by Plug and Play ACPI
[ 6.665650] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 6.823110] Synaptics Touchpad, model: 1, fw: 5.7, id: 0x9b48b1, caps: 0x804793/0x0
[ 6.823174] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 6.860851] yenta_cardbus 0000:02:01.1: ISA IRQ mask 0x0418, PCI irq 11
[ 6.860902] yenta_cardbus 0000:02:01.1: Socket status: 30000006
[ 6.860949] yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
[ 6.861000] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xe000-0xffff: clean.
[ 6.861979] yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
[ 6.862030] yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x39ffffff
[ 6.863201] input: SynPS/2 Synaptics TouchPad as /class/input/input5
[ 6.880504] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 7.046558] usb 1-1: New USB device found, idVendor=03eb, idProduct=3301
[ 7.047747] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 7.047787] usb 1-1: Product: Standard USB Hub
[ 7.048089] usb 1-1: configuration #1 chosen from 1 choice
[ 7.055608] hub 1-1:1.0: USB hub found
[ 7.056545] hub 1-1:1.0: 4 ports detected
[ 7.338521] usb 1-1.1: new low speed USB device using uhci_hcd and address 3
[ 7.445145] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcff: clean.
[ 7.445609] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x800-0x8ff: clean.
[ 7.445744] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x4ff: excluding 0x280-0x287
[ 7.447197] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 7.448059] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: clean.
[ 7.448517] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x800-0x8ff: clean.
[ 7.448652] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x4ff: excluding 0x280-0x287
[ 7.450131] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 7.476636] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c016
[ 7.476685] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.476733] usb 1-1.1: Product: Optical USB Mouse
[ 7.476767] usb 1-1.1: Manufacturer: Logitech
[ 7.477068] usb 1-1.1: configuration #1 chosen from 1 choice
[ 7.533198] input: Logitech Optical USB Mouse as /class/input/input6
[ 7.533427] generic-usb 0003:046D:C016.0001: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1.1/input0
[ 7.533514] usbcore: registered new interface driver usbhid
[ 7.533554] usbhid: v2.6:USB HID core driver
[ 7.754245] microcode: CPU0 sig=0x6b4, pf=0x20, revision=0x2
[ 7.754297] platform microcode: firmware: requesting intel-ucode/06-0b-04
[ 7.780189] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 8.974161] Microcode Update Driver: v2.00 removed.
[ 9.220994] fuse init (API version 7.12)
[ 9.629119] kjournald starting. Commit interval 5 seconds
[ 9.629177] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 9.629460] EXT3 FS on hda6, internal journal
[ 9.629519] EXT3-fs: mounted filesystem with writeback data mode.
[ 9.655267] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 9.655364] kjournald starting. Commit interval 5 seconds
[ 9.655670] EXT3 FS on hda8, internal journal
[ 9.655726] EXT3-fs: mounted filesystem with writeback data mode.
[ 9.693592] Adding 979956k swap on /dev/hda3. Priority:-1 extents:1 across:979956k
[ 11.645284] IBM TrackPoint firmware: 0x0b, buttons: 2/3
[ 11.850288] input: TPPS/2 IBM TrackPoint as /class/input/input7
[ 13.939035] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.072034] nf_conntrack version 0.5.0 (8190 buckets, 32760 max)
[ 14.910895] NET: Unregistered protocol family 23
[ 14.921604] parport_pc 00:0f: disabled
[ 15.177009] 3c59x 0000:02:00.0: PCI INT A disabled
[ 17.204945] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 17.206360] [drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0
[ 17.208639] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 17.208665] agpgart-intel 0000:00:00.0: putting AGP V2 device into 2x mode
[ 17.208689] pci 0000:01:00.0: putting AGP V2 device into 2x mode
[ 17.238508] resource map sanity check conflict: 0xfcff0000 0xfd06ffff 0xfcff0000 0xfcffffff 0000:01:00.0
[ 17.238519] ------------[ cut here ]------------
[ 17.238534] WARNING: at arch/x86/mm/ioremap.c:205 __ioremap_caller+0x2aa/0x2c0()
[ 17.238540] Hardware name: Latitude C610
[ 17.238544] Info: mapping multiple BARs. Your kernel is fine.
[ 17.238548] Modules linked in: radeon xt_state iptable_filter ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables x_tables fuse usbhid uhci_hcd ehci_hcd yenta_socket rsrc_nonstatic pcmcia_core usbcore psmouse [last unloaded: floppy]
[ 17.238588] Pid: 1165, comm: X Not tainted 2.6.31-rc4 #264
[ 17.238592] Call Trace:
[ 17.238602] [<c101998a>] ? __ioremap_caller+0x2aa/0x2c0
[ 17.238627] [<c101998a>] ? __ioremap_caller+0x2aa/0x2c0
[ 17.238638] [<c10254ff>] ? warn_slowpath_common+0x6f/0xd0
[ 17.238646] [<c101998a>] ? __ioremap_caller+0x2aa/0x2c0
[ 17.238654] [<c10255ab>] ? warn_slowpath_fmt+0x2b/0x30
[ 17.238662] [<c101998a>] ? __ioremap_caller+0x2aa/0x2c0
[ 17.238672] [<c105644b>] ? generic_file_buffered_write+0xfb/0x330
[ 17.238681] [<c1019ab4>] ? ioremap_nocache+0x14/0x20
[ 17.238691] [<c117cd15>] ? drm_addmap_core+0x665/0x7a0
[ 17.238698] [<c117cd15>] ? drm_addmap_core+0x665/0x7a0
[ 17.238706] [<c1056b88>] ? __generic_file_aio_write_nolock+0x248/0x540
[ 17.238714] [<c117ce97>] ? drm_addmap_ioctl+0x47/0x90
[ 17.238722] [<c117e048>] ? drm_ioctl+0x138/0x320
[ 17.238730] [<c117ce50>] ? drm_addmap_ioctl+0x0/0x90
[ 17.238741] [<c10cbd60>] ? ext3_file_write+0x30/0xc0
[ 17.238753] [<c107f0fd>] ? do_sync_write+0xcd/0x110
[ 17.238762] [<c108c28f>] ? vfs_ioctl+0x7f/0x90
[ 17.238769] [<c108c403>] ? do_vfs_ioctl+0x73/0x640
[ 17.238777] [<c107fc28>] ? vfs_write+0xf8/0x130
[ 17.238784] [<c108ca0d>] ? sys_ioctl+0x3d/0x70
[ 17.238792] [<c1002e34>] ? sysenter_do_call+0x12/0x26
[ 17.238798] ---[ end trace 38f834eeb78869fb ]---
[ 17.322771] [drm] Setting GART location based on old memory map
[ 17.322805] [drm] Loading R100 Microcode
[ 17.322850] [drm] writeback test succeeded in 1 usecs
[ 44.144079] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 44.144138] pci 0000:03:00.0: reg 10 32bit mmio: [0xffff8000-0xffffffff]
[ 44.250185] cfg80211: Calling CRDA to update world regulatory domain
[ 44.371250] cfg80211: World regulatory domain updated:
[ 44.371262] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 44.371270] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 44.371276] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 44.371282] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 44.371288] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 44.371295] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 44.513522] rt61pci 0000:03:00.0: enabling device (0000 -> 0002)
[ 44.513547] rt61pci 0000:03:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 44.513559] rt61pci 0000:03:00.0: setting latency timer to 64
[ 44.524454] phy0 -> rt61pci_validate_eeprom: EEPROM recovery - NIC: 0xff80
[ 44.524465] phy0 -> rt61pci_validate_eeprom: EEPROM recovery - Led: 0xe0ff
[ 44.524473] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 0301, rf: 0003, rev: 0002561c.
[ 44.563056] phy0: Selected rate control algorithm 'minstrel'
[ 44.563874] Registered led device: rt61pci-phy0::radio
[ 44.563910] Registered led device: rt61pci-phy0::assoc
[ 44.617811] phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561s.bin'.
[ 44.617825] rt61pci 0000:03:00.0: firmware: requesting rt2561s.bin
[ 44.651913] phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8.
[ 44.667017] phy0: device now idle
[ 44.690861] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
[ 44.690875] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
[ 44.690889] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
[ 44.690902] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
[ 44.720558] phy0: device no longer idle - scanning
[ 44.805546] NET: Registered protocol family 17
[ 46.080096] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
[ 46.080113] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
[ 46.080126] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
[ 46.080139] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
[ 46.080156] wlan0: authenticate with AP 00:1f:33:80:09:44
[ 46.081331] wlan0: authenticated
[ 46.081337] wlan0: associate with AP 00:1f:33:80:09:44
[ 46.085690] wlan0: RX AssocResp from 00:1f:33:80:09:44 (capab=0x431 status=0 aid=1)
[ 46.085700] wlan0: associated
[ 46.085711] phy0: Allocated STA 00:1f:33:80:09:44
[ 46.086438] phy0: Inserted STA 00:1f:33:80:09:44
[ 46.086492] phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0
[ 46.086501] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
[ 46.086514] phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0
[ 46.086521] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
[ 46.086533] phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94
[ 46.086540] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
[ 46.086553] phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47
[ 46.086560] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
[ 46.086576] wlan0: CTS protection enabled (BSSID=00:1f:33:80:09:44)
[ 46.086581] wlan0: switched to short barker preamble (BSSID=00:1f:33:80:09:44)
[ 46.086587] wlan0: switched to short slot time (BSSID=00:1f:33:80:09:44)
[ 46.114848] TKIP decrypt: data(len=151) 00 20 01 20 00 00 00 00 aa aa 03 00 00 00 88 8e 01 03 00 7f fe 03 91 00 20 00 00 00 00 00 00 00 03 7d 7d 74 0b 7c e4 25 9c 9b dd ce 37 ac 25 d8 88 bb c0 fb a7 ce 8d 24 f1 94 3f 95 11 e7 78 a4 61 bb c0 fb a7 ce 8d 24 f1 94 3f 95 11 e7 78 a4 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 27 fa b1 10 50 d4 29 40 1c 25 3d fe d7 56 8b ef 00 20 c8 23 7d 1a 44 28 2d 09 9b 41 bc ea 6d cd 15 48 60 7b a8 e9 d5 85 ec 83 ee b9 67 01 5f 6e 6d e8 b1 e9 fe d4
[ 46.114973] TKIP decrypt: iv16=0001 iv32=00000000
[ 46.911591] cfg80211: Calling CRDA for country: GB
[ 46.916917] cfg80211: Regulatory domain changed to country: GB
[ 46.916928] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 46.916935] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 46.916941] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 46.916947] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 46.916952] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 112.116078] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request
[ 116.116077] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request
[ 120.119574] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request
[ 124.116069] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request
[ 128.116072] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request
[ 132.116074] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request
[ 136.116068] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request
[ 140.116072] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request
[ 144.116072] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request
[ 148.116068] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request
[ 152.116071] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request
[ 156.120072] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request
[ 160.120072] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request
[ 164.120072] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request
[ 168.120072] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request
[ 172.120073] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request
[ 175.726531] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
[ 175.726681] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request
[ 175.727199] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
[ 175.727709] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff
[ 175.763682] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
[ 175.764288] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
[ 175.764826] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff
[ 175.764857] wlan0: deauthenticating by local choice (reason=3)
[ 175.764916] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
[ 175.764928] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
[ 175.764939] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
[ 175.764951] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
[ 175.764961] phy0: device now idle
[ 175.764973] phy0: Removed STA 00:1f:33:80:09:44
[ 175.765037] phy0: Destroyed STA 00:1f:33:80:09:44
[ 176.016269] rt61pci 0000:03:00.0: PCI INT A disabled
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: 2.6.31-rc2: Possible regression in rt61pci driver
2009-07-27 9:35 ` Chris Clayton
@ 2009-07-27 14:27 ` Pavel Roskin
2009-07-27 19:35 ` Chris Clayton
0 siblings, 1 reply; 22+ messages in thread
From: Pavel Roskin @ 2009-07-27 14:27 UTC (permalink / raw)
To: Chris Clayton; +Cc: linux-wireless
On Mon, 2009-07-27 at 10:35 +0100, Chris Clayton wrote:
> I've built and installed a kernel with all the various types of
> MAC80211 debugging turned on (in addition to the RT61 driver's) and
> with CONFIG_MAC80211_DEFAULT_PS enabled. The attached file is the
> output from dmesg just after a freeze occurs. (The pcmcia card eject
> represents me ejecting the wireless card, so that the freeze "thaws"
> and I can capture the output from dmesg).
>
> Let me know if any additional diagnostics are needed. I have enabled
> MAC80211 debugfs too.
I could not reproduce the freezing with CONFIG_MAC80211_DEFAULT_PS
enabled. That said, I'm using wireless-testing with a patch for the
scanning state machine (hopefully it will be committed today).
The output of dmesg doesn't show anything interesting. The stack dump
from the video card is unlikely to be related.
But I think you may be getting something when the freeze happen. But to
see it, you need to be on a text console. There are other ways to
capture the kernel messages, which are described in the file
Documentation/oops-tracing.txt in the Linux sources.
--
Regards,
Pavel Roskin
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: 2.6.31-rc2: Possible regression in rt61pci driver
2009-07-27 14:27 ` Pavel Roskin
@ 2009-07-27 19:35 ` Chris Clayton
2009-07-27 20:07 ` Pavel Roskin
0 siblings, 1 reply; 22+ messages in thread
From: Chris Clayton @ 2009-07-27 19:35 UTC (permalink / raw)
To: Pavel Roskin; +Cc: linux-wireless
On Monday 27 July 2009, Pavel Roskin wrote:
>
> But I think you may be getting something when the freeze happen. But to
> see it, you need to be on a text console. There are other ways to
> capture the kernel messages, which are described in the file
> Documentation/oops-tracing.txt in the Linux sources.
I've taken some photos of the screen from the insertion of the card through to ejecting it, and
uploaded them to imageshack: They can be viewed at:
http://img145.imageshack.us/img145/8741/xdscn0647.jpg
http://img170.imageshack.us/img170/1954/xdscn0648.jpg
http://img195.imageshack.us/img195/807/xdscn0649.jpg
http://img195.imageshack.us/img195/9625/xdscn0650.jpg
http://img195.imageshack.us/img195/2717/xdscn0651.jpg
http://img170.imageshack.us/img170/6103/xdscn0652.jpg
http://img170.imageshack.us/img170/5844/xdscn0653.jpg
Between them they should show all the output to the console, although some do overlap a little.
I hope they are helpful in tracking down this problem.
Thanks,
Chris
--
No, Sir; there is nothing which has yet been contrived by man, by which
so much happiness is produced as by a good tavern or inn - Doctor Samuel
Johnson
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: 2.6.31-rc2: Possible regression in rt61pci driver
2009-07-27 19:35 ` Chris Clayton
@ 2009-07-27 20:07 ` Pavel Roskin
2009-07-27 20:22 ` Chris Clayton
0 siblings, 1 reply; 22+ messages in thread
From: Pavel Roskin @ 2009-07-27 20:07 UTC (permalink / raw)
To: chris2553; +Cc: linux-wireless
On Mon, 2009-07-27 at 20:35 +0100, Chris Clayton wrote:
> On Monday 27 July 2009, Pavel Roskin wrote:
> >
> > But I think you may be getting something when the freeze happen. But to
> > see it, you need to be on a text console. There are other ways to
> > capture the kernel messages, which are described in the file
> > Documentation/oops-tracing.txt in the Linux sources.
>
> I've taken some photos of the screen from the insertion of the card through to ejecting it, and
> uploaded them to imageshack: They can be viewed at:
>
> http://img145.imageshack.us/img145/8741/xdscn0647.jpg
> http://img170.imageshack.us/img170/1954/xdscn0648.jpg
> http://img195.imageshack.us/img195/807/xdscn0649.jpg
> http://img195.imageshack.us/img195/9625/xdscn0650.jpg
> http://img195.imageshack.us/img195/2717/xdscn0651.jpg
> http://img170.imageshack.us/img170/6103/xdscn0652.jpg
> http://img170.imageshack.us/img170/5844/xdscn0653.jpg
>
> Between them they should show all the output to the console, although some do overlap a little.
>
> I hope they are helpful in tracking down this problem.
Do you remove the card? It's like the card is disconnected at some
point, either physically or logically.
It looks like a problem specific to the hardware, not anything in the
common wireless code. I suggest that you post your question to
users@rt2x00.serialmonkey.com. That's the mailing list for rt61pci and
other Ralink devices.
--
Regards,
Pavel Roskin
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: 2.6.31-rc2: Possible regression in rt61pci driver
2009-07-27 20:07 ` Pavel Roskin
@ 2009-07-27 20:22 ` Chris Clayton
2009-07-27 20:30 ` Pavel Roskin
2009-07-27 20:32 ` Johannes Berg
0 siblings, 2 replies; 22+ messages in thread
From: Chris Clayton @ 2009-07-27 20:22 UTC (permalink / raw)
To: Pavel Roskin; +Cc: linux-wireless
On Monday 27 July 2009, Pavel Roskin wrote:
> On Mon, 2009-07-27 at 20:35 +0100, Chris Clayton wrote:
> > On Monday 27 July 2009, Pavel Roskin wrote:
> > > But I think you may be getting something when the freeze happen. But
> > > to see it, you need to be on a text console. There are other ways to
> > > capture the kernel messages, which are described in the file
> > > Documentation/oops-tracing.txt in the Linux sources.
> >
> > I've taken some photos of the screen from the insertion of the card
> > through to ejecting it, and uploaded them to imageshack: They can be
> > viewed at:
> >
> > http://img145.imageshack.us/img145/8741/xdscn0647.jpg
> > http://img170.imageshack.us/img170/1954/xdscn0648.jpg
> > http://img195.imageshack.us/img195/807/xdscn0649.jpg
> > http://img195.imageshack.us/img195/9625/xdscn0650.jpg
> > http://img195.imageshack.us/img195/2717/xdscn0651.jpg
> > http://img170.imageshack.us/img170/6103/xdscn0652.jpg
> > http://img170.imageshack.us/img170/5844/xdscn0653.jpg
> >
> > Between them they should show all the output to the console, although
> > some do overlap a little.
> >
> > I hope they are helpful in tracking down this problem.
>
> Do you remove the card? It's like the card is disconnected at some
> point, either physically or logically.
Yes, I remove the card once the laptop has frozen, because doing so "thaws" it again. The laptop is
then usable until 2-5 minutes after I insert the card again, when it will freeze again. I can
repeat this cycle over and over.
>
> It looks like a problem specific to the hardware, not anything in the
> common wireless code. I suggest that you post your question to
> users@rt2x00.serialmonkey.com. That's the mailing list for rt61pci and
> other Ralink devices.
I think I'll just configure MAC80211 power saving off or use the ath5k card that I also own.
Thanks anyway.
Chris
--
No, Sir; there is nothing which has yet been contrived by man, by which
so much happiness is produced as by a good tavern or inn - Doctor Samuel
Johnson
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: 2.6.31-rc2: Possible regression in rt61pci driver
2009-07-27 20:22 ` Chris Clayton
@ 2009-07-27 20:30 ` Pavel Roskin
2009-07-27 20:32 ` Johannes Berg
1 sibling, 0 replies; 22+ messages in thread
From: Pavel Roskin @ 2009-07-27 20:30 UTC (permalink / raw)
To: chris2553; +Cc: linux-wireless
On Mon, 2009-07-27 at 21:22 +0100, Chris Clayton wrote:
> I think I'll just configure MAC80211 power saving off or use the ath5k
> card that I also own.
OK, it's unfortunate but understandable. I'll keep this in mind in case
I have a chance to do a extensive testing for rt61pci. I'm using a PCI
card that cannot be removed to easily.
--
Regards,
Pavel Roskin
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: 2.6.31-rc2: Possible regression in rt61pci driver
2009-07-27 20:22 ` Chris Clayton
2009-07-27 20:30 ` Pavel Roskin
@ 2009-07-27 20:32 ` Johannes Berg
2009-07-28 11:03 ` Chris Clayton
1 sibling, 1 reply; 22+ messages in thread
From: Johannes Berg @ 2009-07-27 20:32 UTC (permalink / raw)
To: chris2553; +Cc: Pavel Roskin, linux-wireless, Ivo van Doorn
[-- Attachment #1: Type: text/plain, Size: 857 bytes --]
On Mon, 2009-07-27 at 21:22 +0100, Chris Clayton wrote:
> Yes, I remove the card once the laptop has frozen, because doing so "thaws" it again. The laptop is
> then usable until 2-5 minutes after I insert the card again, when it will freeze again. I can
> repeat this cycle over and over.
That really points to a hw (or hw programming) bug that causes the card
to lock up the bus. Had that many times in early b43 days.
> > It looks like a problem specific to the hardware, not anything in the
> > common wireless code. I suggest that you post your question to
> > users@rt2x00.serialmonkey.com. That's the mailing list for rt61pci and
> > other Ralink devices.
>
> I think I'll just configure MAC80211 power saving off or use the ath5k card that I also own.
You could also ask Ivo to disable power saving for rt61pci.
johannes
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: 2.6.31-rc2: Possible regression in rt61pci driver
2009-07-27 20:32 ` Johannes Berg
@ 2009-07-28 11:03 ` Chris Clayton
2009-07-28 11:11 ` Luis Correia
0 siblings, 1 reply; 22+ messages in thread
From: Chris Clayton @ 2009-07-28 11:03 UTC (permalink / raw)
To: Johannes Berg; +Cc: Pavel Roskin, linux-wireless, Ivo van Doorn
Hi everyone,
2009/7/27 Johannes Berg <johannes@sipsolutions.net>:
> On Mon, 2009-07-27 at 21:22 +0100, Chris Clayton wrote:
>
>> Yes, I remove the card once the laptop has frozen, because doing so "thaws" it again. The laptop is
>> then usable until 2-5 minutes after I insert the card again, when it will freeze again. I can
>> repeat this cycle over and over.
>
Inspired by the fact that Pavel doesn't get the freeze, I've just
cloned and tested the latest and greatest wireless-testing tree and,
unfortunately, the freeze still occurs. In fact it seems to happen
even more quickly now!
> That really points to a hw (or hw programming) bug that causes the card
> to lock up the bus. Had that many times in early b43 days.
If it's a programming problem, might it be fixable in the firmware
(rt2561s.bin)?
If not and given this is a Belkin card (model F5D7010), I guess there
could be thousands of them out there, so some note on the Devices
section of linuxwireless.org might help other users. In fact two
versions of this this model are currently shown as supported by the
b43 driver, but this, which has worked fine until now, isn't mentioned
at all. T
>> > It looks like a problem specific to the hardware, not anything in the
>> > common wireless code. I suggest that you post your question to
>> > users@rt2x00.serialmonkey.com. That's the mailing list for rt61pci and
>> > other Ralink devices.
>>
>> I think I'll just configure MAC80211 power saving off or use the ath5k card that I also own.
>
> You could also ask Ivo to disable power saving for rt61pci.
>
Rather than simply disabling power saving, could it be done though a
module parameter, so that those with more robust cards are not
disadvantaged?
Chris
--
No, Sir; there is nothing which has yet been contrived by man, by which
so much happiness is produced as by a good tavern or inn - Doctor Samuel
Johnson
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: 2.6.31-rc2: Possible regression in rt61pci driver
2009-07-28 11:03 ` Chris Clayton
@ 2009-07-28 11:11 ` Luis Correia
2009-07-28 13:34 ` Chris Clayton
0 siblings, 1 reply; 22+ messages in thread
From: Luis Correia @ 2009-07-28 11:11 UTC (permalink / raw)
To: Chris Clayton; +Cc: Johannes Berg, Pavel Roskin, linux-wireless, Ivo van Doorn
Hi Chris
On Tue, Jul 28, 2009 at 12:03, Chris Clayton<chris2553@googlemail.com> wrote:
> Hi everyone,
>
> 2009/7/27 Johannes Berg <johannes@sipsolutions.net>:
>> On Mon, 2009-07-27 at 21:22 +0100, Chris Clayton wrote:
>>
>>> Yes, I remove the card once the laptop has frozen, because doing so "thaws" it again. The laptop is
>>> then usable until 2-5 minutes after I insert the card again, when it will freeze again. I can
>>> repeat this cycle over and over.
>>
>
> Inspired by the fact that Pavel doesn't get the freeze, I've just
> cloned and tested the latest and greatest wireless-testing tree and,
> unfortunately, the freeze still occurs. In fact it seems to happen
> even more quickly now!
>
>> That really points to a hw (or hw programming) bug that causes the card
>> to lock up the bus. Had that many times in early b43 days.
>
> If it's a programming problem, might it be fixable in the firmware
> (rt2561s.bin)?
>
> If not and given this is a Belkin card (model F5D7010), I guess there
> could be thousands of them out there, so some note on the Devices
> section of linuxwireless.org might help other users. In fact two
> versions of this this model are currently shown as supported by the
> b43 driver, but this, which has worked fine until now, isn't mentioned
> at all. T
>
>>> > It looks like a problem specific to the hardware, not anything in the
>>> > common wireless code. I suggest that you post your question to
>>> > users@rt2x00.serialmonkey.com. That's the mailing list for rt61pci and
>>> > other Ralink devices.
>>>
>>> I think I'll just configure MAC80211 power saving off or use the ath5k card that I also own.
>>
>> You could also ask Ivo to disable power saving for rt61pci.
>>
>
> Rather than simply disabling power saving, could it be done though a
> module parameter, so that those with more robust cards are not
> disadvantaged?
>
> Chris
Can you do a very dumb test for me?
Boot your laptop by adding 'irqpoll' to the kernel command line
options and see if the problem still occours.
Luis Correia
rt2x00 project admin
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: 2.6.31-rc2: Possible regression in rt61pci driver
2009-07-28 11:11 ` Luis Correia
@ 2009-07-28 13:34 ` Chris Clayton
2009-07-28 13:38 ` Luis Correia
0 siblings, 1 reply; 22+ messages in thread
From: Chris Clayton @ 2009-07-28 13:34 UTC (permalink / raw)
To: Luis Correia; +Cc: Johannes Berg, Pavel Roskin, linux-wireless, Ivo van Doorn
2009/7/28 Luis Correia <luis.f.correia@gmail.com>:
> Hi Chris
> Can you do a very dumb test for me?
>
> Boot your laptop by adding 'irqpoll' to the kernel command line
> options and see if the problem still occours.
>
Not so dumb a request, actually. Running -rc4 with the irqpoll
command line option, the laptop has just survived 30 minutes without a
freeze. It can't survive more than 5 minutes without that option.
Chris
> Luis Correia
> rt2x00 project admin
>
--
No, Sir; there is nothing which has yet been contrived by man, by which
so much happiness is produced as by a good tavern or inn - Doctor Samuel
Johnson
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: 2.6.31-rc2: Possible regression in rt61pci driver
2009-07-28 13:34 ` Chris Clayton
@ 2009-07-28 13:38 ` Luis Correia
2009-07-28 14:15 ` Chris Clayton
2009-07-29 7:03 ` Chris Clayton
0 siblings, 2 replies; 22+ messages in thread
From: Luis Correia @ 2009-07-28 13:38 UTC (permalink / raw)
To: Chris Clayton; +Cc: Johannes Berg, Pavel Roskin, linux-wireless, Ivo van Doorn
Chris
On Tue, Jul 28, 2009 at 14:34, Chris Clayton<chris2553@googlemail.com> wrote:
> 2009/7/28 Luis Correia <luis.f.correia@gmail.com>:
>> Hi Chris
>
>> Can you do a very dumb test for me?
>>
>> Boot your laptop by adding 'irqpoll' to the kernel command line
>> options and see if the problem still occours.
>>
>
> Not so dumb a request, actually. Running -rc4 with the irqpoll
> command line option, the laptop has just survived 30 minutes without a
> freeze. It can't survive more than 5 minutes without that option.
>
> Chris
Well, if the laptop hangs on working without any problems, this may
proove to be some strange kind of hardware incompatibility.
The irqpoll option solves some of the interrupt related problems, by
polling them instead of 'grabbing' them (at least that is what I think
it is happening, correct me if I'm wrong:))
Luis Correia
rt2x00 project admin
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: 2.6.31-rc2: Possible regression in rt61pci driver
2009-07-28 13:38 ` Luis Correia
@ 2009-07-28 14:15 ` Chris Clayton
2009-07-29 7:03 ` Chris Clayton
1 sibling, 0 replies; 22+ messages in thread
From: Chris Clayton @ 2009-07-28 14:15 UTC (permalink / raw)
To: Luis Correia; +Cc: Johannes Berg, Pavel Roskin, linux-wireless, Ivo van Doorn
Luis,
2009/7/28 Luis Correia <luis.f.correia@gmail.com>:
> Chris
>
> On Tue, Jul 28, 2009 at 14:34, Chris Clayton<chris2553@googlemail.com> wrote:
>> 2009/7/28 Luis Correia <luis.f.correia@gmail.com>:
>>> Hi Chris
>>
>>> Can you do a very dumb test for me?
>>>
>>> Boot your laptop by adding 'irqpoll' to the kernel command line
>>> options and see if the problem still occours.
>>>
>>
>> Not so dumb a request, actually. Running -rc4 with the irqpoll
>> command line option, the laptop has just survived 30 minutes without a
>> freeze. It can't survive more than 5 minutes without that option.
>>
>> Chris
>
> Well, if the laptop hangs on working without any problems, this may
> proove to be some strange kind of hardware incompatibility.
>
> The irqpoll option solves some of the interrupt related problems, by
> polling them instead of 'grabbing' them (at least that is what I think
> it is happening, correct me if I'm wrong:))
>
I've no idea whether you are right or wrong :-) If it is a hardware
quirk, the odd thing is that the card has worked perfectly (modulo
development cycle bugs that I've unearthed and reported) for a long
time now, including the codemonkey driver before rt2x00 hit mainline.
Anyway, thanks for your help.
Chris
>
> Luis Correia
> rt2x00 project admin
>
--
No, Sir; there is nothing which has yet been contrived by man, by which
so much happiness is produced as by a good tavern or inn - Doctor Samuel
Johnson
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: 2.6.31-rc2: Possible regression in rt61pci driver
2009-07-28 13:38 ` Luis Correia
2009-07-28 14:15 ` Chris Clayton
@ 2009-07-29 7:03 ` Chris Clayton
2009-07-29 7:21 ` Johannes Berg
2009-07-29 7:45 ` Kalle Valo
1 sibling, 2 replies; 22+ messages in thread
From: Chris Clayton @ 2009-07-29 7:03 UTC (permalink / raw)
To: Luis Correia; +Cc: Johannes Berg, Pavel Roskin, linux-wireless, Ivo van Doorn
On Tuesday 28 July 2009, Luis Correia wrote:
> Chris
>
> On Tue, Jul 28, 2009 at 14:34, Chris Clayton<chris2553@googlemail.com> wrote:
> > 2009/7/28 Luis Correia <luis.f.correia@gmail.com>:
> >> Hi Chris
> >>
> >> Can you do a very dumb test for me?
> >>
> >> Boot your laptop by adding 'irqpoll' to the kernel command line
> >> options and see if the problem still occours.
> >
> > Not so dumb a request, actually. Running -rc4 with the irqpoll
> > command line option, the laptop has just survived 30 minutes without a
> > freeze. It can't survive more than 5 minutes without that option.
Well, the laptop ran -rc4-git2 all evening yesterday without freezing. So using the irqpoll option
seems to be an answer. A few questions and observations though:
1. Are we sure that it is the power-saving change that _caused_ this problem? Could it be that some
other bug is simply unmasked by the power-saving change? I ask this because I noticed yesterday
that the card's network LED switches off several seconds before the laptop freezes.
2. When power-saving kicks in, the network LED on the card is switched off. (At least I'm assuming
that is what switches the LED off) When the card is woken up again, neither the network nor activity
LED lights-up ever again. IMHO, this is a bug.
3. Once power-saving kicks in, the machine cannot be contacted from another machine on the network -
pings are not responded to, for example. Is this the intended behaviour?
4. Are there any plans to be able to switch power-saving on/off on a driver-by-driver basis. It
seems to me, although I'm happy to be corrected, that it is either on or off for a given kernel,
depending on CONFIG_MAC80211_DEFAULT_PS. But, if like me, someone has two cards (one at home and one
at work, for example), one that works fine with PS and one that doesn't, they have to set PS off
for their kernel, or have two kernels. Could PS be {en,dis}abled by, say, a module parameter or a
sysfs switch?
Thanks,
Chris
> >
> > Chris
>
> Well, if the laptop hangs on working without any problems, this may
> proove to be some strange kind of hardware incompatibility.
>
> The irqpoll option solves some of the interrupt related problems, by
> polling them instead of 'grabbing' them (at least that is what I think
> it is happening, correct me if I'm wrong:))
>
>
> Luis Correia
> rt2x00 project admin
--
No, Sir; there is nothing which has yet been contrived by man, by which
so much happiness is produced as by a good tavern or inn - Doctor Samuel
Johnson
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: 2.6.31-rc2: Possible regression in rt61pci driver
2009-07-29 7:03 ` Chris Clayton
@ 2009-07-29 7:21 ` Johannes Berg
2009-07-29 7:45 ` Kalle Valo
1 sibling, 0 replies; 22+ messages in thread
From: Johannes Berg @ 2009-07-29 7:21 UTC (permalink / raw)
To: chris2553; +Cc: Luis Correia, Pavel Roskin, linux-wireless, Ivo van Doorn
[-- Attachment #1: Type: text/plain, Size: 1025 bytes --]
On Wed, 2009-07-29 at 08:03 +0100, Chris Clayton wrote:
> 3. Once power-saving kicks in, the machine cannot be contacted from another machine on the network -
> pings are not responded to, for example. Is this the intended behaviour?
No. The device is supposed to listen to beacons, check if there's
traffic pending and retrieve it. So sounds like a device problem unless
your AP is broken.
> 4. Are there any plans to be able to switch power-saving on/off on a driver-by-driver basis. It
> seems to me, although I'm happy to be corrected, that it is either on or off for a given kernel,
> depending on CONFIG_MAC80211_DEFAULT_PS. But, if like me, someone has two cards (one at home and one
> at work, for example), one that works fine with PS and one that doesn't, they have to set PS off
> for their kernel, or have two kernels. Could PS be {en,dis}abled by, say, a module parameter or a
> sysfs switch?
iwconfig wlan0 power off
(yeah, looks weird, but power means "power saving")
johannes
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: 2.6.31-rc2: Possible regression in rt61pci driver
2009-07-29 7:03 ` Chris Clayton
2009-07-29 7:21 ` Johannes Berg
@ 2009-07-29 7:45 ` Kalle Valo
1 sibling, 0 replies; 22+ messages in thread
From: Kalle Valo @ 2009-07-29 7:45 UTC (permalink / raw)
To: chris2553
Cc: Luis Correia, Johannes Berg, Pavel Roskin, linux-wireless,
Ivo van Doorn
Chris Clayton <chris2553@sky.com> writes:
> 4. Are there any plans to be able to switch power-saving on/off on a
> driver-by-driver basis. It seems to me, although I'm happy to be
> corrected, that it is either on or off for a given kernel, depending
> on CONFIG_MAC80211_DEFAULT_PS.
mac80211 drivers can control power save with IEEE80211_HW_SUPPORTS_PS
flag. Also it can runtime from user space with 'iwconfig wlan0 power
off'. nl80211 interface is on my todo list.
--
Kalle Valo
^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2009-07-29 7:45 UTC | newest]
Thread overview: 22+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-07-13 8:27 2.6.31-rc2: Possible regression in rt61pci driver Chris Clayton
2009-07-14 11:04 ` Chris Clayton
2009-07-21 11:39 ` Chris Clayton
2009-07-26 19:15 ` Chris Clayton
2009-07-26 20:10 ` Pavel Roskin
2009-07-26 21:33 ` Chris Clayton
2009-07-27 0:06 ` Pavel Roskin
2009-07-27 9:35 ` Chris Clayton
2009-07-27 14:27 ` Pavel Roskin
2009-07-27 19:35 ` Chris Clayton
2009-07-27 20:07 ` Pavel Roskin
2009-07-27 20:22 ` Chris Clayton
2009-07-27 20:30 ` Pavel Roskin
2009-07-27 20:32 ` Johannes Berg
2009-07-28 11:03 ` Chris Clayton
2009-07-28 11:11 ` Luis Correia
2009-07-28 13:34 ` Chris Clayton
2009-07-28 13:38 ` Luis Correia
2009-07-28 14:15 ` Chris Clayton
2009-07-29 7:03 ` Chris Clayton
2009-07-29 7:21 ` Johannes Berg
2009-07-29 7:45 ` Kalle Valo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).
