From: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
To: linux-wireless@vger.kernel.org
Cc: linville@tuxdriver.com,
Jussi Kivilinna <jussi.kivilinna@mbnet.fi>,
David Brownell <dbrownell@users.sourceforge.net>
Subject: [PATCH 07/10] rndis_host: allow rndis_wlan to see all indications
Date: Thu, 30 Jul 2009 19:41:52 +0300 [thread overview]
Message-ID: <20090730164152.28317.48077.stgit@fate.lan> (raw)
In-Reply-To: <20090730164120.28317.53313.stgit@fate.lan>
Allow rndis_wlan to see all indications. Currently rndis_host lets rndis_wlan to
know about link state changes only, but there is whole set of other
802.11-specific indications that rndis_wlan should handle properly. So rename
link_change() to indication() and convert rndis_wlan to use it.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Cc: David Brownell <dbrownell@users.sourceforge.net>
---
drivers/net/usb/rndis_host.c | 50 +++++++++++++++++++++----------------
drivers/net/wireless/rndis_wlan.c | 31 +++++++++++++++++++----
include/linux/usb/usbnet.h | 5 +---
3 files changed, 56 insertions(+), 30 deletions(-)
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index 2232232..d032bba 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -65,6 +65,32 @@ void rndis_status(struct usbnet *dev, struct urb *urb)
EXPORT_SYMBOL_GPL(rndis_status);
/*
+ * RNDIS indicate messages.
+ */
+static void rndis_msg_indicate(struct usbnet *dev, struct rndis_indicate *msg,
+ int buflen)
+{
+ struct cdc_state *info = (void *)&dev->data;
+ struct device *udev = &info->control->dev;
+
+ if (dev->driver_info->indication) {
+ dev->driver_info->indication(dev, msg, buflen);
+ } else {
+ switch (msg->status) {
+ case RNDIS_STATUS_MEDIA_CONNECT:
+ dev_info(udev, "rndis media connect\n");
+ break;
+ case RNDIS_STATUS_MEDIA_DISCONNECT:
+ dev_info(udev, "rndis media disconnect\n");
+ break;
+ default:
+ dev_info(udev, "rndis indication: 0x%08x\n",
+ le32_to_cpu(msg->status));
+ }
+ }
+}
+
+/*
* RPC done RNDIS-style. Caller guarantees:
* - message is properly byteswapped
* - there's no other request pending
@@ -143,27 +169,9 @@ int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen)
request_id, xid);
/* then likely retry */
} else switch (buf->msg_type) {
- case RNDIS_MSG_INDICATE: { /* fault/event */
- struct rndis_indicate *msg = (void *)buf;
- int state = 0;
-
- switch (msg->status) {
- case RNDIS_STATUS_MEDIA_CONNECT:
- state = 1;
- case RNDIS_STATUS_MEDIA_DISCONNECT:
- dev_info(&info->control->dev,
- "rndis media %sconnect\n",
- !state?"dis":"");
- if (dev->driver_info->link_change)
- dev->driver_info->link_change(
- dev, state);
- break;
- default:
- dev_info(&info->control->dev,
- "rndis indication: 0x%08x\n",
- le32_to_cpu(msg->status));
- }
- }
+ case RNDIS_MSG_INDICATE: /* fault/event */
+ rndis_msg_indicate(dev, (void *)buf, buflen);
+
break;
case RNDIS_MSG_KEEPALIVE: { /* ping */
struct rndis_keepalive_c *msg = (void *)buf;
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index f6dcbb1..6b6452b 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -2211,13 +2211,32 @@ static void rndis_wlan_set_multicast_list(struct net_device *dev)
queue_work(priv->workqueue, &priv->work);
}
-static void rndis_wlan_link_change(struct usbnet *usbdev, int state)
+static void rndis_wlan_indication(struct usbnet *usbdev, void *ind, int buflen)
{
struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
+ struct rndis_indicate *msg = ind;
/* queue work to avoid recursive calls into rndis_command */
- set_bit(state ? WORK_LINK_UP : WORK_LINK_DOWN, &priv->work_pending);
- queue_work(priv->workqueue, &priv->work);
+ switch (msg->status) {
+ case RNDIS_STATUS_MEDIA_CONNECT:
+ devinfo(usbdev, "media connect");
+
+ set_bit(WORK_LINK_UP, &priv->work_pending);
+ queue_work(priv->workqueue, &priv->work);
+ break;
+
+ case RNDIS_STATUS_MEDIA_DISCONNECT:
+ devinfo(usbdev, "media disconnect");
+
+ set_bit(WORK_LINK_DOWN, &priv->work_pending);
+ queue_work(priv->workqueue, &priv->work);
+ break;
+
+ default:
+ devinfo(usbdev, "indication: 0x%08x",
+ le32_to_cpu(msg->status));
+ break;
+ }
}
@@ -2666,7 +2685,7 @@ static const struct driver_info bcm4320b_info = {
.reset = rndis_wlan_reset,
.stop = rndis_wlan_stop,
.early_init = bcm4320b_early_init,
- .link_change = rndis_wlan_link_change,
+ .indication = rndis_wlan_indication,
};
static const struct driver_info bcm4320a_info = {
@@ -2681,7 +2700,7 @@ static const struct driver_info bcm4320a_info = {
.reset = rndis_wlan_reset,
.stop = rndis_wlan_stop,
.early_init = bcm4320a_early_init,
- .link_change = rndis_wlan_link_change,
+ .indication = rndis_wlan_indication,
};
static const struct driver_info rndis_wlan_info = {
@@ -2696,7 +2715,7 @@ static const struct driver_info rndis_wlan_info = {
.reset = rndis_wlan_reset,
.stop = rndis_wlan_stop,
.early_init = bcm4320a_early_init,
- .link_change = rndis_wlan_link_change,
+ .indication = rndis_wlan_indication,
};
/*-------------------------------------------------------------------------*/
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index c642f78..de8b4b1 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -122,9 +122,8 @@ struct driver_info {
* right after minidriver have initialized hardware. */
int (*early_init)(struct usbnet *dev);
- /* called by minidriver when link state changes, state: 0=disconnect,
- * 1=connect */
- void (*link_change)(struct usbnet *dev, int state);
+ /* called by minidriver when receiving indication */
+ void (*indication)(struct usbnet *dev, void *ind, int indlen);
/* for new devices, use the descriptor-reading code instead */
int in; /* rx endpoint */
next prev parent reply other threads:[~2009-07-30 16:51 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-30 16:41 [PATCH 01/10] usbnet: allow "minidriver" to prevent urb unlinking on usbnet_stop Jussi Kivilinna
2009-07-30 16:41 ` [PATCH 02/10] rndis_wlan: stop workers on rndis_wlan_stop() and restore on rndis_wlan_reset() Jussi Kivilinna
2009-07-30 16:41 ` [PATCH 03/10] rndis_wlan: clear cfg80211 scan on rndis_wlan_stop() Jussi Kivilinna
2009-07-30 16:41 ` [PATCH 04/10] rndis_wlan: reset device and restore multicast list on rndis_wlan_reset() Jussi Kivilinna
2009-07-30 16:41 ` [PATCH 05/10] rndis_wlan: set current packet filter to zero on stop Jussi Kivilinna
2009-07-30 16:41 ` [PATCH 06/10] rndis_wlan: add rndis_set/query_oid debugging Jussi Kivilinna
2009-07-30 16:41 ` Jussi Kivilinna [this message]
2009-07-30 16:41 ` [PATCH 08/10] rndis_wlan: handle 802.11 indications from device Jussi Kivilinna
2009-07-30 16:42 ` [PATCH 09/10] rndis_wlan: add missing padding to struct rndis_80211_remove_key Jussi Kivilinna
2009-07-30 16:42 ` [PATCH 10/10] rndis_wlan: rework key handling Jussi Kivilinna
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090730164152.28317.48077.stgit@fate.lan \
--to=jussi.kivilinna@mbnet.fi \
--cc=dbrownell@users.sourceforge.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).