From: Michael Buesch <mb@bu3sch.de>
To: "Gábor Stefanik" <netrolller.3d@gmail.com>
Cc: John Linville <linville@tuxdriver.com>,
linux-wireless <linux-wireless@vger.kernel.org>,
Broadcom Wireless <bcm43xx-dev@lists.berlios.de>,
Larry Finger <Larry.Finger@lwfinger.net>
Subject: Re: [PATCH] b43: implement baseband init for LP-PHY <= rev1
Date: Mon, 3 Aug 2009 00:10:24 +0200 [thread overview]
Message-ID: <200908030010.24321.mb@bu3sch.de> (raw)
In-Reply-To: <4A760DF5.6050504@gmail.com>
On Monday 03 August 2009 00:06:45 Gábor Stefanik wrote:
> Implement baseband init for rev.0 and rev.1 LP PHYs. Convert
> boardflags_hi values to defines.
> Implement b43_phy_copy for easier copying between registers, as needed
> by LP-PHY init.
Please resubmit after coding style compliance checking and after fixing
your mail client to avoid linewrapping damage.
> Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com>
> Cc: Michael Buesch <mb@bu3sch.de>
> Cc: Larry Finger <larry.finger@lwfinger.net>
> ---
> b43.h | 11 ++++++
> phy_common.c | 7 ++++
> phy_lp.c | 95
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
> phy_lp.h | 8 +++-
> phy_n.c | 3 +
> 5 files changed, 120 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
> index 4e8ad84..41ca727 100644
> --- a/drivers/net/wireless/b43/b43.h
> +++ b/drivers/net/wireless/b43/b43.h
> @@ -142,6 +142,17 @@
> #define B43_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given
> in alternate GPIOs */
> #define B43_BFL_ALTIQ 0x8000 /* alternate I/Q settings */
>
> +/* SPROM boardflags_hi values */
> +#define B43_BFH_NOPA 0x0001 /* has no PA */
> +#define B43_BFH_RSSIINV 0x0002 /* RSSI uses positive
> slope (not TSSI) */
> +#define B43_BFH_PAREF 0x0004 /* uses the PARef LDO */
> +#define B43_BFH_3TSWITCH 0x0008 /* uses a triple throw switch
> shared
> + * with bluetooth */
> +#define B43_BFH_PHASESHIFT 0x0010 /* can support phase shifter */
> +#define B43_BFH_BUCKBOOST 0x0020 /* has buck/booster */
> +#define B43_BFH_FEM_BT 0x0040 /* has FEM and switch to
> share antenna
> + * with bluetooth */
> +
> /* GPIO register offset, in both ChipCommon and PCI core. */
> #define B43_GPIO_CONTROL 0x6c
>
> diff --git a/drivers/net/wireless/b43/phy_common.c
> b/drivers/net/wireless/b43/phy_common.c
> index e176b6e..999e0bd 100644
> --- a/drivers/net/wireless/b43/phy_common.c
> +++ b/drivers/net/wireless/b43/phy_common.c
> @@ -240,6 +240,13 @@ void b43_phy_write(struct b43_wldev *dev, u16 reg,
> u16 value)
> dev->phy.ops->phy_write(dev, reg, value);
> }
>
> +void b43_phy_copy(struct b43_wldev *dev, u16 srcreg, u16 destreg)
> +{
> + assert_mac_suspended(dev);
> + dev->phy.ops->phy_write(dev, destreg,
> + dev->phy.ops->phy_read(dev, srcreg));
> +}
> +
> void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask)
> {
> b43_phy_write(dev, offset,
> diff --git a/drivers/net/wireless/b43/phy_lp.c
> b/drivers/net/wireless/b43/phy_lp.c
> index 58e319d..dbaa2e4 100644
> --- a/drivers/net/wireless/b43/phy_lp.c
> +++ b/drivers/net/wireless/b43/phy_lp.c
> @@ -66,7 +66,100 @@ static void lpphy_table_init(struct b43_wldev *dev)
>
> static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
> {
> - B43_WARN_ON(1);//TODO rev < 2 not supported, yet.
> + struct ssb_bus *bus = dev->dev->bus;
> + struct b43_phy_lp *lpphy = dev->phy.lp;
> + u16 tmp, tmp2;
> +
> + if (dev->phy.rev == 1 &&
> + (bus->sprom.boardflags_hi & B43_BFH_FEM_BT)) {
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x000A);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0x3F00, 0x0900);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xFFC0, 0x000A);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xC0FF, 0x0B00);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xFFC0, 0x000A);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xC0FF, 0x0400);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xFFC0, 0x000A);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xC0FF, 0x0B00);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_5, 0xFFC0, 0x000A);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_5, 0xC0FF, 0x0900);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_6, 0xFFC0, 0x000A);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_6, 0xC0FF, 0x0B00);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_7, 0xFFC0, 0x000A);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_7, 0xC0FF, 0x0900);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_8, 0xFFC0, 0x000A);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_8, 0xC0FF, 0x0B00);
> + } else if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ ||
> + (bus->boardinfo.type == 0x048A) || ((dev->phy.rev == 0) &&
> + (bus->sprom.boardflags_lo & B43_BFL_FEM))) {
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x0001);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xC0FF, 0x0400);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xFFC0, 0x0001);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xC0FF, 0x0500);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xFFC0, 0x0002);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xC0FF, 0x0800);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xFFC0, 0x0002);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xC0FF, 0x0A00);
> + } else if (dev->phy.rev == 1 ||
> + (bus->sprom.boardflags_lo & B43_BFL_FEM)) {
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x0004);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xC0FF, 0x0800);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xFFC0, 0x0004);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xC0FF, 0x0C00);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xFFC0, 0x0002);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xC0FF, 0x0100);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xFFC0, 0x0002);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xC0FF, 0x0300);
> + } else {
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x000A);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xC0FF, 0x0900);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xFFC0, 0x000A);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xC0FF, 0x0B00);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xFFC0, 0x0006);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xC0FF, 0x0500);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xFFC0, 0x0006);
> + b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xC0FF, 0x0700);
> + }
> + if (dev->phy.rev == 1) {
> + b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_1, B43_LPPHY_TR_LOOKUP_5);
> + b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_2, B43_LPPHY_TR_LOOKUP_6);
> + b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_3, B43_LPPHY_TR_LOOKUP_7);
> + b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_4, B43_LPPHY_TR_LOOKUP_8);
> + }
> + if (bus->sprom.boardflags_hi & B43_BFH_FEM_BT) &&
> + (bus->chip_id == 0x5354) &&
> + (bus->chip_package == SSB_CHIPPACK_BCM4712S)) {
> + b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x0006);
> + b43_phy_write(dev, B43_LPPHY_GPIO_SELECT, 0x0005);
> + b43_phy_write(dev, B43_LPPHY_GPIO_OUTEN, 0xFFFF);
> + b43_hf_write(dev, b43_hf_read | 0x0800ULL << 32);
> + }
> + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
> + b43_phy_set(dev, B43_LPPHY_LP_PHY_CTL, 0x8000);
> + b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x0040);
> + b43_phy_maskset(dev, B43_LPPHY_MINPWR_LEVEL, 0x00FF, 0xA400);
> + b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xF0FF, 0x0B00);
> + b43_phy_maskset(dev, 0x030, 0xFFF8, 0x0007);
> + b43_phy_maskset(dev, B43_LPPHY_DSSS_CONFIRM_CNT, 0xFFF8, 0x0003);
> + b43_phy_maskset(dev, B43_LPPHY_DSSS_CONFIRM_CNT, 0xFFC7, 0x0020);
> + b43_phy_mask(dev, B43_LPPHY_IDLEAFTERPKTRXTO, 0x00FF);
> + } else { /* 5GHz */
> + b43_phy_mask(dev, 0x448, 0x7FFF);
> + b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, 0xFFBF);
> + }
> + if (dev->phy.rev == 1) {
> + tmp = b43_read(dev, B43_LPPHY_CLIPCTRTHRESH);
> + tmp2 = (tmp & 0x03E0) >> 5
> + tmp2 |= tmp << 5;
> + b43_phy_write(dev, 0x4C3, tmp2);
> + tmp = b43_read(dev, B43_LPPHY_OFDMSYNCTHRESH0);
> + tmp2 = (tmp & 0x1F00) >> 8
> + tmp2 |= tmp << 5;
> + b43_phy_write(dev, 0x4C4, tmp2);
> + tmp = b43_read(dev, B43_LPPHY_VERYLOWGAINDB);
> + tmp2 = tmp & 0x00FF
> + tmp2 |= tmp << 8;
> + b43_phy_write(dev, 0x4C5, tmp2);
> + }
> }
>
> static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
> diff --git a/drivers/net/wireless/b43/phy_lp.h
> b/drivers/net/wireless/b43/phy_lp.h
> index 18370b4..d0e67e4 100644
> --- a/drivers/net/wireless/b43/phy_lp.h
> +++ b/drivers/net/wireless/b43/phy_lp.h
> @@ -273,12 +273,16 @@
> #define B43_LPPHY_AFE_DDFS_POINTER_INIT B43_PHY_OFDM(0xB8) /*
> AFE DDFS pointer init */
> #define B43_LPPHY_AFE_DDFS_INCR_INIT B43_PHY_OFDM(0xB9) /* AFE
> DDFS incr init */
> #define B43_LPPHY_MRCNOISEREDUCTION B43_PHY_OFDM(0xBA) /*
> mrcNoiseReduction */
> -#define B43_LPPHY_TRLOOKUP3 B43_PHY_OFDM(0xBB) /* TRLookup3 */
> -#define B43_LPPHY_TRLOOKUP4 B43_PHY_OFDM(0xBC) /* TRLookup4 */
> +#define B43_LPPHY_TR_LOOKUP_3 B43_PHY_OFDM(0xBB) /* TR
> Lookup 3 */
> +#define B43_LPPHY_TR_LOOKUP_4 B43_PHY_OFDM(0xBC) /* TR
> Lookup 4 */
> #define B43_LPPHY_RADAR_FIFO_STAT B43_PHY_OFDM(0xBD) /* Radar
> FIFO Status */
> #define B43_LPPHY_GPIO_OUTEN B43_PHY_OFDM(0xBE) /* GPIO Out
> enable */
> #define B43_LPPHY_GPIO_SELECT B43_PHY_OFDM(0xBF) /* GPIO
> Select */
> #define B43_LPPHY_GPIO_OUT B43_PHY_OFDM(0xC0) /* GPIO Out */
> +#define B43_LPPHY_TR_LOOKUP_5 B43_PHY_OFDM(0xC7) /* TR
> Lookup 5? */
> +#define B43_LPPHY_TR_LOOKUP_6 B43_PHY_OFDM(0xC8) /* TR
> Lookup 6? */
> +#define B43_LPPHY_TR_LOOKUP_7 B43_PHY_OFDM(0xC9) /* TR
> Lookup 7? */
> +#define B43_LPPHY_TR_LOOKUP_8 B43_PHY_OFDM(0xCA) /* TR
> Lookup 8? */
>
>
>
> diff --git a/drivers/net/wireless/b43/phy_n.c
> b/drivers/net/wireless/b43/phy_n.c
> index 8bcfda5..14ad95a 100644
> --- a/drivers/net/wireless/b43/phy_n.c
> +++ b/drivers/net/wireless/b43/phy_n.c
> @@ -137,7 +137,8 @@ static void b43_radio_init2055_post(struct b43_wldev
> *dev)
>
> b43_radio_mask(dev, B2055_MASTER1, 0xFFF3);
> msleep(1);
> - if ((sprom->revision != 4) || !(sprom->boardflags_hi & 0x0002)) {
> + if ((sprom->revision != 4) ||
> + !(sprom->boardflags_hi & B43_BFH_RSSIINV)) {
> if ((binfo->vendor != PCI_VENDOR_ID_BROADCOM) ||
> (binfo->type != 0x46D) ||
> (binfo->rev < 0x41)) {
>
>
>
--
Greetings, Michael.
next prev parent reply other threads:[~2009-08-02 22:10 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-02 22:06 [PATCH] b43: implement baseband init for LP-PHY <= rev1 Gábor Stefanik
2009-08-02 22:08 ` Gábor Stefanik
2009-08-02 22:10 ` Michael Buesch [this message]
2009-08-02 22:20 ` Larry Finger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200908030010.24321.mb@bu3sch.de \
--to=mb@bu3sch.de \
--cc=Larry.Finger@lwfinger.net \
--cc=bcm43xx-dev@lists.berlios.de \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=netrolller.3d@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox