From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from bar.sig21.net ([80.81.252.164]:45175 "EHLO bar.sig21.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754109AbZHJMwl (ORCPT ); Mon, 10 Aug 2009 08:52:41 -0400 Date: Mon, 10 Aug 2009 14:52:41 +0200 From: Johannes Stezenbach To: Bob Copeland Cc: ath5k-devel@lists.ath5k.org, linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org, "Rafael J. Wysocki" Subject: Re: 2.6.31-rc5 regression: ath5k broken after suspend-to-ram Message-ID: <20090810125241.GA6082@sig21.net> References: <20090807215155.GA17043@sig21.net> <20090809170401.GB16332@sig21.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <20090809170401.GB16332@sig21.net> Sender: linux-wireless-owner@vger.kernel.org List-ID: On Sun, Aug 09, 2009 at 07:04:01PM +0200, Johannes Stezenbach wrote: > With the nl80211 driver everything works. Although it might not be that important I though I should report the following observations when using wpa_supplicant with the nl80211 driver onn ath5k: 1. wpa_supplicant complains about "Could not configure driver to use managed mode" and "Failed to set interface wlan0 mode" (but it works anyway). This is Debian sid wpasupplicant_0.6.9-3. The error is from wpasupplicant-0.6.9/src/drivers/driver_nl80211.c where is sends the NL80211_CMD_SET_INTERFACE msg. 2. The first ifup after boot or ath5k module reload (modprobe ath5k -r; modprobe ath5k) is much faster than the second and subsequent ifup. The first time it takes around 7 secs until "wpa_cli status" reports wpa_state=COMPLETED, the second time it takes around 25 secs. Thanks Johannes