Re: [PATCH v2] b43: LP-PHY: Begin implementing calibration & software RFKILL support

[Michael Buesch <mb@bu3sch.de>]

On Sunday 30 August 2009 17:10:23 Larry Finger wrote:
> Michael Buesch wrote:
> > On Sunday 30 August 2009 02:15:55 Gábor Stefanik wrote:
> >>  static void lpphy_pr41573_workaround(struct b43_wldev *dev)
> >>  {
> >>  	struct b43_phy_lp *lpphy = dev->phy.lp;
> >> @@ -1357,28 +1488,440 @@ static void lpphy_pr41573_workaround(struct b43_wldev *dev)
> >>  		b43_lptab_read_bulk(dev, B43_LPTAB32(7, 0x140),
> >>  				    saved_tab_size, saved_tab);
> >>  	}
> >> +	b43_put_phy_into_reset(dev);
> > 
> > Are you sure you really want this?
> > This function completely disables the PHY on the backplane and keeps the physical
> > PHY reset pin asserted (even after return from the function).
> > So the PHY will physically be powered down from this point on. The following
> > PHY accesses could even hang the machine, because the PHY won't respond to
> > register accesses anymore.
> > 
> > We currently only use this function on A/G Multi-PHY devices to permanently
> > hard-disable the PHY that's not used.
> 
> The PHY reset routine in
> http://bcm-v4.sipsolutions.net/802.11/PHY/Reset, which I just updated
> for the latest N PHY changes, appears to be a different routine than
> b43_put_phy_into_reset(). The names are confusing.

b43_put_phy_into_reset() is opencoded in the specifications in various init
routines. There's no separate specs page for that function.
But I think the code is straightforward and easy to understand.

-- 
Greetings, Michael.