* Re: [rt2x00] rt2500pci is spamming syslogd since upgrade to 2.6.31 [not found] <20090915174233.7db381cd@varda> @ 2009-09-15 16:13 ` Ivo van Doorn 2009-09-18 6:37 ` Julian Calaby 0 siblings, 1 reply; 4+ messages in thread From: Ivo van Doorn @ 2009-09-15 16:13 UTC (permalink / raw) To: Alejandro Riveira Fernández Cc: linux-kernel@vger.kernel.org, John W. Linville, linux-wireless@vger.kernel.org Hi, > Hi; my syslog has many entries like this since the upgrade to 2.6.31 > > phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). > > Sometimes the driver just start spamming like crazy sometimes is at less rate > sometimes it does not appear. > > I'm running 2.6.31 with a revert [1] config follows. If more info is needed > just ask > > [1] http://bugzilla.kernel.org/show_bug.cgi?id=13362 Try disabling powersaving, iwconfig wlan0 power off Ivo ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [rt2x00] rt2500pci is spamming syslogd since upgrade to 2.6.31 2009-09-15 16:13 ` [rt2x00] rt2500pci is spamming syslogd since upgrade to 2.6.31 Ivo van Doorn @ 2009-09-18 6:37 ` Julian Calaby 2009-09-18 7:00 ` Ivo Van Doorn 0 siblings, 1 reply; 4+ messages in thread From: Julian Calaby @ 2009-09-18 6:37 UTC (permalink / raw) To: Ivo van Doorn Cc: Alejandro Riveira Fernández, linux-kernel@vger.kernel.org, John W. Linville, linux-wireless@vger.kernel.org 2009/9/16 Ivo van Doorn <ivdoorn@gmail.com>: > Hi, > >> Hi; my syslog has many entries like this since the upgrade to 2.6.31 >> >> phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). >> >> Sometimes the driver just start spamming like crazy sometimes is at less rate >> sometimes it does not appear. >> >> I'm running 2.6.31 with a revert [1] config follows. If more info is needed >> just ask >> >> [1] http://bugzilla.kernel.org/show_bug.cgi?id=13362 > > Try disabling powersaving, > > iwconfig wlan0 power off I have an identical problem, which is fixed by this command. It is possible to detect that the chip doesn't, for whatever reason, support powersaving and disable it in the driver? Thanks, -- Julian Calaby Email: julian.calaby@gmail.com .Plan: http://sites.google.com/site/juliancalaby/ ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [rt2x00] rt2500pci is spamming syslogd since upgrade to 2.6.31 2009-09-18 6:37 ` Julian Calaby @ 2009-09-18 7:00 ` Ivo Van Doorn 2009-09-18 7:14 ` Julian Calaby 0 siblings, 1 reply; 4+ messages in thread From: Ivo Van Doorn @ 2009-09-18 7:00 UTC (permalink / raw) To: Julian Calaby Cc: Alejandro Riveira Fernández, linux-kernel@vger.kernel.org, John W. Linville, linux-wireless@vger.kernel.org On Fri, Sep 18, 2009 at 8:37 AM, Julian Calaby <julian.calaby@gmail.com> wrote: > 2009/9/16 Ivo van Doorn <ivdoorn@gmail.com>: >> Hi, >> >>> Hi; my syslog has many entries like this since the upgrade to 2.6.31 >>> >>> phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). >>> >>> Sometimes the driver just start spamming like crazy sometimes is at less rate >>> sometimes it does not appear. >>> >>> I'm running 2.6.31 with a revert [1] config follows. If more info is needed >>> just ask >>> >>> [1] http://bugzilla.kernel.org/show_bug.cgi?id=13362 >> >> Try disabling powersaving, >> >> iwconfig wlan0 power off > > I have an identical problem, which is fixed by this command. > > It is possible to detect that the chip doesn't, for whatever reason, > support powersaving and disable it in the driver? Well I simply have to: a) fix the driver to handle powersaving better b) disable powersaving support for the driver It will probably be (b) first followed by (a) much later if I ever get the time to look into the issue. Ivo ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [rt2x00] rt2500pci is spamming syslogd since upgrade to 2.6.31 2009-09-18 7:00 ` Ivo Van Doorn @ 2009-09-18 7:14 ` Julian Calaby 0 siblings, 0 replies; 4+ messages in thread From: Julian Calaby @ 2009-09-18 7:14 UTC (permalink / raw) To: Ivo Van Doorn Cc: Alejandro Riveira Fernández, linux-kernel@vger.kernel.org, John W. Linville, linux-wireless@vger.kernel.org On Fri, Sep 18, 2009 at 17:00, Ivo Van Doorn <ivdoorn@gmail.com> wrote: > On Fri, Sep 18, 2009 at 8:37 AM, Julian Calaby <julian.calaby@gmail.com> wrote: >> 2009/9/16 Ivo van Doorn <ivdoorn@gmail.com>: >>> Hi, >>> >>>> Hi; my syslog has many entries like this since the upgrade to 2.6.31 >>>> >>>> phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). >>>> >>>> Sometimes the driver just start spamming like crazy sometimes is at less rate >>>> sometimes it does not appear. >>>> >>>> I'm running 2.6.31 with a revert [1] config follows. If more info is needed >>>> just ask >>>> >>>> [1] http://bugzilla.kernel.org/show_bug.cgi?id=13362 >>> >>> Try disabling powersaving, >>> >>> iwconfig wlan0 power off >> >> I have an identical problem, which is fixed by this command. >> >> It is possible to detect that the chip doesn't, for whatever reason, >> support powersaving and disable it in the driver? > > Well I simply have to: > a) fix the driver to handle powersaving better > b) disable powersaving support for the driver > > It will probably be (b) first followed by (a) much later if I ever > get the time to look into the issue. Fair enough. I'll take a look if I get an opportunity. Thanks, -- Julian Calaby Email: julian.calaby@gmail.com .Plan: http://sites.google.com/site/juliancalaby/ ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2009-09-18 7:14 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20090915174233.7db381cd@varda>
2009-09-15 16:13 ` [rt2x00] rt2500pci is spamming syslogd since upgrade to 2.6.31 Ivo van Doorn
2009-09-18 6:37 ` Julian Calaby
2009-09-18 7:00 ` Ivo Van Doorn
2009-09-18 7:14 ` Julian Calaby
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).