From: "Carlos R. Mafra" <crmafra2@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [2.6.32-rc3] iwlagn lost connection after s2ram (with warnings)
Date: Wed, 7 Oct 2009 16:20:31 +0200 [thread overview]
Message-ID: <20091007142031.GA7495@Pilar.aei.mpg.de> (raw)
I just got these warnings after resuming from a suspend to RAM, and
the wireless connection was not resumed (now I am connected via eth0).
This is the first time I had a failed wireless resume since 2.6.32-rc1.
The full dmesg is here: http://www.aei.mpg.de/~crmafra/dmesg-2.6.32-rc3-wifi.txt
[ 3427.570113] Restarting tasks ...
[ 3427.585827] wlan0: deauthenticated from 00:0b:86:26:36:f1 (Reason: 6)
[ 3427.589451] done.
[ 3428.503203] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input15
[ 3428.521064] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input16
[ 3434.504175] wlan0: direct probe to AP 00:0b:86:26:36:f1 (try 1)
[ 3434.507058] wlan0: direct probe responded
[ 3434.507062] wlan0: authenticate with AP 00:0b:86:26:36:f1 (try 1)
[ 3434.509000] wlan0: authenticated
[ 3434.509022] wlan0: associate with AP 00:0b:86:26:36:f1 (try 1)
[ 3434.512778] wlan0: RX ReassocResp from 00:0b:86:26:36:f1 (capab=0x431 status=0 aid=2)
[ 3434.512782] wlan0: associated
[ 3434.563942] wlan0: deauthenticating from 00:0b:86:26:36:f1 by local choice (reason=3)
[ 3434.564023] ------------[ cut here ]------------
[ 3434.564039] WARNING: at net/wireless/mlme.c:96 cfg80211_send_rx_assoc+0x193/0x230()
[ 3434.564045] Hardware name: VGN-FZ240E
[ 3434.564049] Modules linked in: usbhid nvram dvb_usb_dib0700 dib7000p dib7000m dib0070 dvb_usb dib3000mc dib8000 dibx000_common snd_hda_codec_idt uvcvideo snd_hda_intel snd_hda_codec ehci_hcd sg uhci_hcd snd_hwdep sky2 iwlagn i2c_i801 sr_mod evdev ata_piix ahci libata sd_mod scsi_mod
[ 3434.564104] Pid: 2319, comm: phy0 Not tainted 2.6.32-rc3 #204
[ 3434.564109] Call Trace:
[ 3434.564119] [<ffffffff81420dd3>] ? cfg80211_send_rx_assoc+0x193/0x230
[ 3434.564131] [<ffffffff81047cb8>] warn_slowpath_common+0x78/0xd0
[ 3434.564139] [<ffffffff81047d1f>] warn_slowpath_null+0xf/0x20
[ 3434.564147] [<ffffffff81420dd3>] cfg80211_send_rx_assoc+0x193/0x230
[ 3434.564156] [<ffffffff814316cb>] ieee80211_sta_work+0x2fb/0x1100
[ 3434.564166] [<ffffffff81453b1f>] ? _spin_unlock_bh+0xf/0x20
[ 3434.564175] [<ffffffff8142802a>] ? ieee80211_configure_filter+0x11a/0x170
[ 3434.564183] [<ffffffff814313d0>] ? ieee80211_sta_work+0x0/0x1100
[ 3434.564193] [<ffffffff8105e9e2>] worker_thread+0x182/0x260
[ 3434.564203] [<ffffffff81063320>] ? autoremove_wake_function+0x0/0x40
[ 3434.564211] [<ffffffff8105e860>] ? worker_thread+0x0/0x260
[ 3434.564219] [<ffffffff81062f06>] kthread+0x96/0xb0
[ 3434.564229] [<ffffffff8100cd1a>] child_rip+0xa/0x20
[ 3434.564237] [<ffffffff81062e70>] ? kthread+0x0/0xb0
[ 3434.564245] [<ffffffff8100cd10>] ? child_rip+0x0/0x20
[ 3434.564250] ---[ end trace 99d6122abfa316f7 ]---
[ 3434.564272] ------------[ cut here ]------------
[ 3434.564280] WARNING: at net/wireless/sme.c:417 __cfg80211_connect_result+0x343/0x380()
[ 3434.564285] Hardware name: VGN-FZ240E
[ 3434.564289] Modules linked in: usbhid nvram dvb_usb_dib0700 dib7000p dib7000m dib0070 dvb_usb dib3000mc dib8000 dibx000_common snd_hda_codec_idt uvcvideo snd_hda_intel snd_hda_codec ehci_hcd sg uhci_hcd snd_hwdep sky2 iwlagn i2c_i801 sr_mod evdev ata_piix ahci libata sd_mod scsi_mod
[ 3434.564335] Pid: 2319, comm: phy0 Tainted: G W 2.6.32-rc3 #204
[ 3434.564340] Call Trace:
[ 3434.564347] [<ffffffff81453b1f>] ? _spin_unlock_bh+0xf/0x20
[ 3434.564355] [<ffffffff814236e3>] ? __cfg80211_connect_result+0x343/0x380
[ 3434.564364] [<ffffffff81047cb8>] warn_slowpath_common+0x78/0xd0
[ 3434.564373] [<ffffffff81047d1f>] warn_slowpath_null+0xf/0x20
[ 3434.564381] [<ffffffff814236e3>] __cfg80211_connect_result+0x343/0x380
[ 3434.564389] [<ffffffff814509a2>] ? dump_stack+0x72/0x7b
[ 3434.564397] [<ffffffff81420e10>] cfg80211_send_rx_assoc+0x1d0/0x230
[ 3434.564405] [<ffffffff814316cb>] ieee80211_sta_work+0x2fb/0x1100
[ 3434.564413] [<ffffffff81453b1f>] ? _spin_unlock_bh+0xf/0x20
[ 3434.564421] [<ffffffff8142802a>] ? ieee80211_configure_filter+0x11a/0x170
[ 3434.564429] [<ffffffff814313d0>] ? ieee80211_sta_work+0x0/0x1100
[ 3434.564438] [<ffffffff8105e9e2>] worker_thread+0x182/0x260
[ 3434.564447] [<ffffffff81063320>] ? autoremove_wake_function+0x0/0x40
[ 3434.564455] [<ffffffff8105e860>] ? worker_thread+0x0/0x260
[ 3434.564463] [<ffffffff81062f06>] kthread+0x96/0xb0
[ 3434.564471] [<ffffffff8100cd1a>] child_rip+0xa/0x20
[ 3434.564479] [<ffffffff81062e70>] ? kthread+0x0/0xb0
[ 3434.564487] [<ffffffff8100cd10>] ? child_rip+0x0/0x20
[ 3434.564492] ---[ end trace 99d6122abfa316f8 ]---
[ 3434.962611] Registered led device: iwl-phy0::radio
[ 3434.962629] Registered led device: iwl-phy0::assoc
[ 3434.962645] Registered led device: iwl-phy0::RX
[ 3434.962661] Registered led device: iwl-phy0::TX
[ 3435.000526] ADDRCONF(NETDEV_UP): wlan0: link is not ready
next reply other threads:[~2009-10-07 14:22 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-07 14:20 Carlos R. Mafra [this message]
2009-10-08 17:44 ` [2.6.32-rc3] iwlagn lost connection after s2ram (with warnings) reinette chatre
2009-10-08 18:15 ` Carlos R. Mafra
2009-10-09 9:36 ` Carlos R. Mafra
2009-10-14 15:15 ` Carlos R. Mafra
2009-10-14 16:44 ` Luis R. Rodriguez
2009-10-14 17:22 ` Carlos R. Mafra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091007142031.GA7495@Pilar.aei.mpg.de \
--to=crmafra2@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox