Re: [PATCH] libertas if_usb: Fix crash on 64-bit machines

[Christian Lamparter <chunkeey@googlemail.com>]

On Friday 30 October 2009 19:51:21 David Woodhouse wrote:
> On Fri, 2009-10-30 at 19:44 +0100, Christian Lamparter wrote:
> > 
> > that's just a fill-in macro.
> > AFAICT usb_submit_urb does the tricky dma mapping.
> 
> Ah, that makes sense. In that case, all we need to do is make
> map_urb_for_dma() do the right thing.

well, but while we're on the subject of libertas.

I took a quick look around and wrote down some hopefully _helpful_ comments.
That said, I don't have any libertas hw, so I have no idea if the attached
code will actually do what its supposed to do... I'll leave it up to the
professionals to test & write a real fix(es) with a proper commit message. 

Notes:
- most + IPFIELD_ALIGN_OFFSET can be replaced by a
  single skb_reserve, right after allocation.

- skb_tail_pointer(skb) should be used to get
  the right rx_buf pointer.

- setting URB_ZERO_PACKET is pointless for urbs
  which are submitted to an IN endpoint.
---
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index a8262de..f220db9 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -506,17 +506,16 @@ static int __if_usb_submit_rx_urb(struct if_usb_card *cardp,
 		goto rx_ret;
 	}
 
+	skb_reserve(skb, IPFIELD_ALIGN_OFFSET);
 	cardp->rx_skb = skb;
 
 	/* Fill the receive configuration URB and initialise the Rx call back */
 	usb_fill_bulk_urb(cardp->rx_urb, cardp->udev,
 			  usb_rcvbulkpipe(cardp->udev, cardp->ep_in),
-			  (void *) (skb->tail + (size_t) IPFIELD_ALIGN_OFFSET),
+			  skb_tail_pointer(skb),
 			  MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn,
 			  cardp);
 
-	cardp->rx_urb->transfer_flags |= URB_ZERO_PACKET;
-
 	lbs_deb_usb2(&cardp->udev->dev, "Pointer for rx_urb %p\n", cardp->rx_urb);
 	if ((ret = usb_submit_urb(cardp->rx_urb, GFP_ATOMIC))) {
 		lbs_deb_usbd(&cardp->udev->dev, "Submit Rx URB failed: %d\n", ret);
@@ -557,7 +556,7 @@ static void if_usb_receive_fwload(struct urb *urb)
 	}
 
 	if (cardp->fwdnldover) {
-		__le32 *tmp = (__le32 *)(skb->data + IPFIELD_ALIGN_OFFSET);
+		__le32 *tmp = (__le32 *)skb->data;
 
 		if (tmp[0] == cpu_to_le32(CMD_TYPE_INDICATION) &&
 		    tmp[1] == cpu_to_le32(MACREG_INT_CODE_FIRMWARE_READY)) {
@@ -572,8 +571,7 @@ static void if_usb_receive_fwload(struct urb *urb)
 		return;
 	}
 	if (cardp->bootcmdresp <= 0) {
-		memcpy (&bootcmdresp, skb->data + IPFIELD_ALIGN_OFFSET,
-			sizeof(bootcmdresp));
+		memcpy(&bootcmdresp, skb->data, sizeof(bootcmdresp));
 
 		if (le16_to_cpu(cardp->udev->descriptor.bcdDevice) < 0x3106) {
 			kfree_skb(skb);
@@ -619,8 +617,7 @@ static void if_usb_receive_fwload(struct urb *urb)
 		return;
 	}
 
-	memcpy(syncfwheader, skb->data + IPFIELD_ALIGN_OFFSET,
-	       sizeof(struct fwsyncheader));
+	memcpy(syncfwheader, skb->data, sizeof(struct fwsyncheader));
 
 	if (!syncfwheader->cmd) {
 		lbs_deb_usb2(&cardp->udev->dev, "FW received Blk with correct CRC\n");
@@ -665,7 +662,6 @@ static inline void process_cmdtypedata(int recvlength, struct sk_buff *skb,
 		return;
 	}
 
-	skb_reserve(skb, IPFIELD_ALIGN_OFFSET);
 	skb_put(skb, recvlength);
 	skb_pull(skb, MESSAGE_HEADER_LEN);
 
@@ -719,7 +715,7 @@ static void if_usb_receive(struct urb *urb)
 	int recvlength = urb->actual_length;
 	uint8_t *recvbuff = NULL;
 	uint32_t recvtype = 0;
-	__le32 *pkt = (__le32 *)(skb->data + IPFIELD_ALIGN_OFFSET);
+	__le32 *pkt = (__le32 *)skb->data;
 	uint32_t event;
 
 	lbs_deb_enter(LBS_DEB_USB);
@@ -732,7 +728,7 @@ static void if_usb_receive(struct urb *urb)
 			goto setup_for_next;
 		}
 
-		recvbuff = skb->data + IPFIELD_ALIGN_OFFSET;
+		recvbuff = skb->data;
 		recvtype = le32_to_cpu(pkt[0]);
 		lbs_deb_usbd(&cardp->udev->dev,
 			    "Recv length = 0x%x, Recv type = 0x%X\n",