linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: Gertjan van Wingerde <gwingerde@gmail.com>,
	Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
	Ivo van Doorn <ivdoorn@gmail.com>,
	linux-kernel@vger.kernel.org,
	"John W. Linville" <linville@tuxdriver.com>
Subject: [PATCH 16/41] rt2800pci: add rt2800_bbp_[read,write]() wrappers
Date: Wed, 04 Nov 2009 18:33:57 +0100	[thread overview]
Message-ID: <20091104173357.28463.50170.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20091104173151.28463.68742.sendpatchset@localhost.localdomain>

From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] rt2800pci: add rt2800_bbp_[read,write]() wrappers

Part of preparations for later code unification.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/net/wireless/rt2x00/rt2800pci.c |  138 +++++++++++++++++---------------
 1 file changed, 75 insertions(+), 63 deletions(-)

Index: b/drivers/net/wireless/rt2x00/rt2800pci.c
===================================================================
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -135,6 +135,18 @@ static void rt2800pci_bbp_read(struct rt
 	mutex_unlock(&rt2x00dev->csr_mutex);
 }
 
+static inline void rt2800_bbp_write(struct rt2x00_dev *rt2x00dev,
+				    const unsigned int word, const u8 value)
+{
+	rt2800pci_bbp_write(rt2x00dev, word, value);
+}
+
+static inline void rt2800_bbp_read(struct rt2x00_dev *rt2x00dev,
+				   const unsigned int word, u8 *value)
+{
+	rt2800pci_bbp_read(rt2x00dev, word, value);
+}
+
 static void rt2800pci_rfcsr_write(struct rt2x00_dev *rt2x00dev,
 				  const unsigned int word, const u8 value)
 {
@@ -399,8 +411,8 @@ static const struct rt2x00debug rt2800pc
 		.word_count	= EEPROM_SIZE / sizeof(u16),
 	},
 	.bbp	= {
-		.read		= rt2800pci_bbp_read,
-		.write		= rt2800pci_bbp_write,
+		.read		= rt2800_bbp_read,
+		.write		= rt2800_bbp_write,
 		.word_base	= BBP_BASE,
 		.word_size	= sizeof(u8),
 		.word_count	= BBP_SIZE / sizeof(u8),
@@ -766,8 +778,8 @@ static void rt2800pci_config_ant(struct 
 	u8 r1;
 	u8 r3;
 
-	rt2800pci_bbp_read(rt2x00dev, 1, &r1);
-	rt2800pci_bbp_read(rt2x00dev, 3, &r3);
+	rt2800_bbp_read(rt2x00dev, 1, &r1);
+	rt2800_bbp_read(rt2x00dev, 3, &r3);
 
 	/*
 	 * Configure the TX antenna.
@@ -800,8 +812,8 @@ static void rt2800pci_config_ant(struct 
 		break;
 	}
 
-	rt2800pci_bbp_write(rt2x00dev, 3, r3);
-	rt2800pci_bbp_write(rt2x00dev, 1, r1);
+	rt2800_bbp_write(rt2x00dev, 3, r3);
+	rt2800_bbp_write(rt2x00dev, 1, r1);
 }
 
 static void rt2800pci_config_lna_gain(struct rt2x00_dev *rt2x00dev,
@@ -944,26 +956,26 @@ static void rt2800pci_config_channel(str
 	/*
 	 * Change BBP settings
 	 */
-	rt2800pci_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
-	rt2800pci_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
-	rt2800pci_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
-	rt2800pci_bbp_write(rt2x00dev, 86, 0);
+	rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
+	rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
+	rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
+	rt2800_bbp_write(rt2x00dev, 86, 0);
 
 	if (rf->channel <= 14) {
 		if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
-			rt2800pci_bbp_write(rt2x00dev, 82, 0x62);
-			rt2800pci_bbp_write(rt2x00dev, 75, 0x46);
+			rt2800_bbp_write(rt2x00dev, 82, 0x62);
+			rt2800_bbp_write(rt2x00dev, 75, 0x46);
 		} else {
-			rt2800pci_bbp_write(rt2x00dev, 82, 0x84);
-			rt2800pci_bbp_write(rt2x00dev, 75, 0x50);
+			rt2800_bbp_write(rt2x00dev, 82, 0x84);
+			rt2800_bbp_write(rt2x00dev, 75, 0x50);
 		}
 	} else {
-		rt2800pci_bbp_write(rt2x00dev, 82, 0xf2);
+		rt2800_bbp_write(rt2x00dev, 82, 0xf2);
 
 		if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
-			rt2800pci_bbp_write(rt2x00dev, 75, 0x46);
+			rt2800_bbp_write(rt2x00dev, 75, 0x46);
 		else
-			rt2800pci_bbp_write(rt2x00dev, 75, 0x50);
+			rt2800_bbp_write(rt2x00dev, 75, 0x50);
 	}
 
 	rt2800_register_read(rt2x00dev, TX_BAND_CFG, &reg);
@@ -995,23 +1007,23 @@ static void rt2800pci_config_channel(str
 
 	rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
 
-	rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
+	rt2800_bbp_read(rt2x00dev, 4, &bbp);
 	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
-	rt2800pci_bbp_write(rt2x00dev, 4, bbp);
+	rt2800_bbp_write(rt2x00dev, 4, bbp);
 
-	rt2800pci_bbp_read(rt2x00dev, 3, &bbp);
+	rt2800_bbp_read(rt2x00dev, 3, &bbp);
 	rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
-	rt2800pci_bbp_write(rt2x00dev, 3, bbp);
+	rt2800_bbp_write(rt2x00dev, 3, bbp);
 
 	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
 		if (conf_is_ht40(conf)) {
-			rt2800pci_bbp_write(rt2x00dev, 69, 0x1a);
-			rt2800pci_bbp_write(rt2x00dev, 70, 0x0a);
-			rt2800pci_bbp_write(rt2x00dev, 73, 0x16);
+			rt2800_bbp_write(rt2x00dev, 69, 0x1a);
+			rt2800_bbp_write(rt2x00dev, 70, 0x0a);
+			rt2800_bbp_write(rt2x00dev, 73, 0x16);
 		} else {
-			rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
-			rt2800pci_bbp_write(rt2x00dev, 70, 0x08);
-			rt2800pci_bbp_write(rt2x00dev, 73, 0x11);
+			rt2800_bbp_write(rt2x00dev, 69, 0x16);
+			rt2800_bbp_write(rt2x00dev, 70, 0x08);
+			rt2800_bbp_write(rt2x00dev, 73, 0x11);
 		}
 	}
 
@@ -1025,9 +1037,9 @@ static void rt2800pci_config_txpower(str
 	u32 value = TXPOWER_G_TO_DEV(txpower);
 	u8 r1;
 
-	rt2800pci_bbp_read(rt2x00dev, 1, &r1);
+	rt2800_bbp_read(rt2x00dev, 1, &r1);
 	rt2x00_set_field8(&reg, BBP1_TX_POWER, 0);
-	rt2800pci_bbp_write(rt2x00dev, 1, r1);
+	rt2800_bbp_write(rt2x00dev, 1, r1);
 
 	rt2800_register_read(rt2x00dev, TX_PWR_CFG_0, &reg);
 	rt2x00_set_field32(&reg, TX_PWR_CFG_0_1MBS, value);
@@ -1176,7 +1188,7 @@ static inline void rt2800pci_set_vgc(str
 				     struct link_qual *qual, u8 vgc_level)
 {
 	if (qual->vgc_level != vgc_level) {
-		rt2800pci_bbp_write(rt2x00dev, 66, vgc_level);
+		rt2800_bbp_write(rt2x00dev, 66, vgc_level);
 		qual->vgc_level = vgc_level;
 		qual->vgc_level_reg = vgc_level;
 	}
@@ -1720,7 +1732,7 @@ static int rt2800pci_wait_bbp_ready(stru
 	msleep(1);
 
 	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2800pci_bbp_read(rt2x00dev, 0, &value);
+		rt2800_bbp_read(rt2x00dev, 0, &value);
 		if ((value != 0xff) && (value != 0x00))
 			return 0;
 		udelay(REGISTER_BUSY_DELAY);
@@ -1741,33 +1753,33 @@ static int rt2800pci_init_bbp(struct rt2
 		     rt2800pci_wait_bbp_ready(rt2x00dev)))
 		return -EACCES;
 
-	rt2800pci_bbp_write(rt2x00dev, 65, 0x2c);
-	rt2800pci_bbp_write(rt2x00dev, 66, 0x38);
-	rt2800pci_bbp_write(rt2x00dev, 69, 0x12);
-	rt2800pci_bbp_write(rt2x00dev, 70, 0x0a);
-	rt2800pci_bbp_write(rt2x00dev, 73, 0x10);
-	rt2800pci_bbp_write(rt2x00dev, 81, 0x37);
-	rt2800pci_bbp_write(rt2x00dev, 82, 0x62);
-	rt2800pci_bbp_write(rt2x00dev, 83, 0x6a);
-	rt2800pci_bbp_write(rt2x00dev, 84, 0x99);
-	rt2800pci_bbp_write(rt2x00dev, 86, 0x00);
-	rt2800pci_bbp_write(rt2x00dev, 91, 0x04);
-	rt2800pci_bbp_write(rt2x00dev, 92, 0x00);
-	rt2800pci_bbp_write(rt2x00dev, 103, 0x00);
-	rt2800pci_bbp_write(rt2x00dev, 105, 0x05);
+	rt2800_bbp_write(rt2x00dev, 65, 0x2c);
+	rt2800_bbp_write(rt2x00dev, 66, 0x38);
+	rt2800_bbp_write(rt2x00dev, 69, 0x12);
+	rt2800_bbp_write(rt2x00dev, 70, 0x0a);
+	rt2800_bbp_write(rt2x00dev, 73, 0x10);
+	rt2800_bbp_write(rt2x00dev, 81, 0x37);
+	rt2800_bbp_write(rt2x00dev, 82, 0x62);
+	rt2800_bbp_write(rt2x00dev, 83, 0x6a);
+	rt2800_bbp_write(rt2x00dev, 84, 0x99);
+	rt2800_bbp_write(rt2x00dev, 86, 0x00);
+	rt2800_bbp_write(rt2x00dev, 91, 0x04);
+	rt2800_bbp_write(rt2x00dev, 92, 0x00);
+	rt2800_bbp_write(rt2x00dev, 103, 0x00);
+	rt2800_bbp_write(rt2x00dev, 105, 0x05);
 
 	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
-		rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
-		rt2800pci_bbp_write(rt2x00dev, 73, 0x12);
+		rt2800_bbp_write(rt2x00dev, 69, 0x16);
+		rt2800_bbp_write(rt2x00dev, 73, 0x12);
 	}
 
 	if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION)
-		rt2800pci_bbp_write(rt2x00dev, 84, 0x19);
+		rt2800_bbp_write(rt2x00dev, 84, 0x19);
 
 	if (rt2x00_rt(&rt2x00dev->chip, RT3052)) {
-		rt2800pci_bbp_write(rt2x00dev, 31, 0x08);
-		rt2800pci_bbp_write(rt2x00dev, 78, 0x0e);
-		rt2800pci_bbp_write(rt2x00dev, 80, 0x08);
+		rt2800_bbp_write(rt2x00dev, 31, 0x08);
+		rt2800_bbp_write(rt2x00dev, 78, 0x0e);
+		rt2800_bbp_write(rt2x00dev, 80, 0x08);
 	}
 
 	for (i = 0; i < EEPROM_BBP_SIZE; i++) {
@@ -1776,7 +1788,7 @@ static int rt2800pci_init_bbp(struct rt2
 		if (eeprom != 0xffff && eeprom != 0x0000) {
 			reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
 			value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
-			rt2800pci_bbp_write(rt2x00dev, reg_id, value);
+			rt2800_bbp_write(rt2x00dev, reg_id, value);
 		}
 	}
 
@@ -1795,9 +1807,9 @@ static u8 rt2800pci_init_rx_filter(struc
 
 	rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
 
-	rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
+	rt2800_bbp_read(rt2x00dev, 4, &bbp);
 	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
-	rt2800pci_bbp_write(rt2x00dev, 4, bbp);
+	rt2800_bbp_write(rt2x00dev, 4, bbp);
 
 	rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
 	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
@@ -1806,13 +1818,13 @@ static u8 rt2800pci_init_rx_filter(struc
 	/*
 	 * Set power & frequency of passband test tone
 	 */
-	rt2800pci_bbp_write(rt2x00dev, 24, 0);
+	rt2800_bbp_write(rt2x00dev, 24, 0);
 
 	for (i = 0; i < 100; i++) {
-		rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
+		rt2800_bbp_write(rt2x00dev, 25, 0x90);
 		msleep(1);
 
-		rt2800pci_bbp_read(rt2x00dev, 55, &passband);
+		rt2800_bbp_read(rt2x00dev, 55, &passband);
 		if (passband)
 			break;
 	}
@@ -1820,13 +1832,13 @@ static u8 rt2800pci_init_rx_filter(struc
 	/*
 	 * Set power & frequency of stopband test tone
 	 */
-	rt2800pci_bbp_write(rt2x00dev, 24, 0x06);
+	rt2800_bbp_write(rt2x00dev, 24, 0x06);
 
 	for (i = 0; i < 100; i++) {
-		rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
+		rt2800_bbp_write(rt2x00dev, 25, 0x90);
 		msleep(1);
 
-		rt2800pci_bbp_read(rt2x00dev, 55, &stopband);
+		rt2800_bbp_read(rt2x00dev, 55, &stopband);
 
 		if ((passband - stopband) <= filter_target) {
 			rfcsr24++;
@@ -1905,7 +1917,7 @@ static int rt2800pci_init_rfcsr(struct r
 	/*
 	 * Set back to initial state
 	 */
-	rt2800pci_bbp_write(rt2x00dev, 24, 0);
+	rt2800_bbp_write(rt2x00dev, 24, 0);
 
 	rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
 	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
@@ -1914,9 +1926,9 @@ static int rt2800pci_init_rfcsr(struct r
 	/*
 	 * set BBP back to BW20
 	 */
-	rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
+	rt2800_bbp_read(rt2x00dev, 4, &bbp);
 	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
-	rt2800pci_bbp_write(rt2x00dev, 4, bbp);
+	rt2800_bbp_write(rt2x00dev, 4, bbp);
 
 	return 0;
 }

  parent reply	other threads:[~2009-11-04 17:34 UTC|newest]

Thread overview: 143+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-11-04 17:31 [PATCH 00/41] rewritten rt2800 drivers Bartlomiej Zolnierkiewicz
2009-11-04 17:31 ` [PATCH 01/41] rt2800usb: make Kconfig help entry more helpful Bartlomiej Zolnierkiewicz
2009-11-04 18:22   ` Gertjan van Wingerde
2009-11-05 18:40   ` Ivo van Doorn
2009-11-04 17:32 ` [PATCH 02/41] rt2800pci: " Bartlomiej Zolnierkiewicz
2009-11-04 18:26   ` Gertjan van Wingerde
2009-11-06 16:13     ` Bartlomiej Zolnierkiewicz
2009-11-06 19:53       ` Gertjan van Wingerde
2009-11-05 18:41   ` Ivo van Doorn
2009-11-04 17:32 ` [PATCH 03/41] rt2800usb: fix rt2800usb_rfcsr_read() Bartlomiej Zolnierkiewicz
2009-11-04 18:28   ` Gertjan van Wingerde
2009-11-05 18:41   ` Ivo van Doorn
2009-11-04 17:32 ` [PATCH 04/41] rt2800pci: fix crypto in TX frame Bartlomiej Zolnierkiewicz
2009-11-04 18:30   ` Gertjan van Wingerde
2009-11-05 18:41   ` Ivo van Doorn
2009-11-04 17:32 ` [PATCH 05/41] rt2800pci: fix comment about register access Bartlomiej Zolnierkiewicz
2009-11-04 18:34   ` Gertjan van Wingerde
2009-11-05 18:41   ` Ivo van Doorn
2009-11-04 17:32 ` [PATCH 06/41] rt2800pci: fix comment about IV/EIV fields Bartlomiej Zolnierkiewicz
2009-11-04 18:36   ` Gertjan van Wingerde
2009-11-05 18:41   ` Ivo van Doorn
2009-11-04 17:32 ` [PATCH 07/41] rt2x00: fix rt2x00usb_register_read() comment Bartlomiej Zolnierkiewicz
2009-11-04 18:43   ` Gertjan van Wingerde
2009-11-05 18:42   ` Ivo van Doorn
2009-11-04 17:32 ` [PATCH 08/41] rt2800usb: use rt2x00usb_register_multiwrite() to set key entries Bartlomiej Zolnierkiewicz
2009-11-04 18:44   ` Gertjan van Wingerde
2009-11-05 18:42   ` Ivo van Doorn
2009-11-04 17:33 ` [PATCH 09/41] rt2800usb: add rt2800_register_[read,write]() wrappers Bartlomiej Zolnierkiewicz
2009-11-04 19:08   ` Gertjan van Wingerde
2009-11-05 18:44   ` Ivo van Doorn
2009-11-04 17:33 ` [PATCH 10/41] rt2800pci: " Bartlomiej Zolnierkiewicz
2009-11-04 19:16   ` Gertjan van Wingerde
2009-11-06 16:13     ` Bartlomiej Zolnierkiewicz
2009-11-06 19:55       ` Gertjan van Wingerde
2009-11-05 18:45   ` Ivo van Doorn
2009-11-04 17:33 ` [PATCH 11/41] rt2800usb: add rt2800_register_multi[read,write]() wrappers Bartlomiej Zolnierkiewicz
2009-11-04 19:18   ` Gertjan van Wingerde
2009-11-05 18:46   ` Ivo van Doorn
2009-11-04 17:33 ` [PATCH 12/41] rt2800pci: " Bartlomiej Zolnierkiewicz
2009-11-04 19:20   ` Gertjan van Wingerde
2009-11-05 18:47   ` Ivo van Doorn
2009-11-04 17:33 ` [PATCH 13/41] rt2800usb: add rt2800_regbusy_read() wrapper Bartlomiej Zolnierkiewicz
2009-11-04 19:21   ` Gertjan van Wingerde
2009-11-05 18:49   ` Ivo van Doorn
2009-11-06 16:23     ` Bartlomiej Zolnierkiewicz
2009-11-06 18:20       ` Ivo van Doorn
2009-11-04 17:33 ` [PATCH 14/41] rt2800pci: " Bartlomiej Zolnierkiewicz
2009-11-04 19:24   ` Gertjan van Wingerde
2009-11-05 18:49   ` Ivo van Doorn
2009-11-04 17:33 ` [PATCH 15/41] rt2800usb: add rt2800_bbp_[read,write]() wrappers Bartlomiej Zolnierkiewicz
2009-11-04 19:30   ` Gertjan van Wingerde
2009-11-05 18:50   ` Ivo van Doorn
2009-11-04 17:33 ` Bartlomiej Zolnierkiewicz [this message]
2009-11-04 19:31   ` [PATCH 16/41] rt2800pci: " Gertjan van Wingerde
2009-11-05 18:50   ` Ivo van Doorn
2009-11-04 17:34 ` [PATCH 17/41] rt2800usb: add rt2800_rfcsr_[read,write]() wrappers Bartlomiej Zolnierkiewicz
2009-11-04 19:34   ` Gertjan van Wingerde
2009-11-05 18:50   ` Ivo van Doorn
2009-11-04 17:34 ` [PATCH 18/41] rt2800pci: " Bartlomiej Zolnierkiewicz
2009-11-04 19:44   ` Gertjan van Wingerde
2009-11-05 18:50   ` Ivo van Doorn
2009-11-04 17:34 ` [PATCH 19/41] rt2800usb: add rt2800_rf_[read,write]() wrappers Bartlomiej Zolnierkiewicz
2009-11-04 19:46   ` Gertjan van Wingerde
2009-11-05 18:51   ` Ivo van Doorn
2009-11-04 17:34 ` [PATCH 20/41] rt2800pci: " Bartlomiej Zolnierkiewicz
2009-11-04 19:47   ` Gertjan van Wingerde
2009-11-05 18:51   ` Ivo van Doorn
2009-11-04 17:34 ` [PATCH 21/41] rt2800usb: add rt2800_mcu_request() wrapper Bartlomiej Zolnierkiewicz
2009-11-04 19:48   ` Gertjan van Wingerde
2009-11-05 18:51   ` Ivo van Doorn
2009-11-04 17:34 ` [PATCH 22/41] rt2800pci: " Bartlomiej Zolnierkiewicz
2009-11-04 20:21   ` Gertjan van Wingerde
2009-11-05 18:52   ` Ivo van Doorn
2009-11-04 17:34 ` [PATCH 23/41] rt2x00: add driver private field to struct rt2x00_dev Bartlomiej Zolnierkiewicz
2009-11-04 19:55   ` Gertjan van Wingerde
2009-11-05 18:52   ` Ivo van Doorn
2009-11-05 18:57     ` Ivo van Doorn
2009-11-06 16:27       ` Bartlomiej Zolnierkiewicz
2009-11-06 18:22         ` Ivo van Doorn
2009-11-04 17:34 ` [PATCH 24/41] rt2800usb: convert to use struct rt2800_ops methods Bartlomiej Zolnierkiewicz
2009-11-04 20:22   ` Gertjan van Wingerde
2009-11-05 18:53   ` Ivo van Doorn
2009-11-05 18:57     ` Ivo van Doorn
2009-11-04 17:35 ` [PATCH 25/41] rt2800pci: " Bartlomiej Zolnierkiewicz
2009-11-04 19:56   ` Gertjan van Wingerde
2009-11-05 18:57   ` Ivo van Doorn
2009-11-04 17:35 ` [PATCH 26/41] rt2x00: fix rt2x00usb_register_multiwrite() arguments Bartlomiej Zolnierkiewicz
2009-11-04 19:59   ` Gertjan van Wingerde
2009-11-05 18:58   ` Ivo van Doorn
2009-11-04 17:35 ` [PATCH 27/41] rt2x00: fix rt2x00usb_regbusy_read() arguments Bartlomiej Zolnierkiewicz
2009-11-04 20:01   ` Gertjan van Wingerde
2009-11-05 18:59   ` Ivo van Doorn
2009-11-04 17:35 ` [PATCH 28/41] rt2x00: fix rt2x00pci_register_multi[read,write]() arguments Bartlomiej Zolnierkiewicz
2009-11-04 20:04   ` Gertjan van Wingerde
2009-11-05 18:59   ` Ivo van Doorn
2009-11-04 17:35 ` [PATCH 29/41] rt2800: add rt2800lib.h Bartlomiej Zolnierkiewicz
2009-11-04 20:09   ` Gertjan van Wingerde
2009-11-05 19:00   ` Ivo van Doorn
2009-11-04 17:35 ` [PATCH 30/41] rt2800usb: fix comments in rt2800usb.h Bartlomiej Zolnierkiewicz
2009-11-04 20:12   ` Gertjan van Wingerde
2009-11-05 19:01   ` Ivo van Doorn
2009-11-04 17:35 ` [PATCH 31/41] rt2800usb: add RXINFO_DESC_SIZE definition Bartlomiej Zolnierkiewicz
2009-11-05 19:02   ` Ivo van Doorn
2009-11-05 20:33   ` Gertjan van Wingerde
2009-11-04 17:35 ` [PATCH 32/41] rt2800: fix duplication in header files Bartlomiej Zolnierkiewicz
2009-11-05 19:04   ` Ivo van Doorn
2009-11-05 20:37   ` Gertjan van Wingerde
2009-11-04 17:36 ` [PATCH 33/41] rt2800: fix comments in rt2800.h Bartlomiej Zolnierkiewicz
2009-11-05 19:05   ` Ivo van Doorn
2009-11-05 20:38   ` Gertjan van Wingerde
2009-11-04 17:36 ` [PATCH 34/41] rt2x00: add support for different chipset interfaces Bartlomiej Zolnierkiewicz
2009-11-05 19:06   ` Ivo van Doorn
2009-11-05 20:39   ` Gertjan van Wingerde
2009-11-04 17:36 ` [PATCH 35/41] rt2800: prepare for rt2800lib addition Bartlomiej Zolnierkiewicz
2009-11-05 19:07   ` Ivo van Doorn
2009-11-05 20:43   ` Gertjan van Wingerde
2009-11-06 18:24   ` Ivo van Doorn
2009-11-04 17:36 ` [PATCH 36/41] rt2800: add rt2800lib (part one) Bartlomiej Zolnierkiewicz
2009-11-05 19:09   ` Ivo van Doorn
2009-11-05 20:44   ` Gertjan van Wingerde
2009-11-04 17:36 ` [PATCH 37/41] rt2x00: remove needless ifdefs from rt2x00leds.h Bartlomiej Zolnierkiewicz
2009-11-05 19:09   ` Ivo van Doorn
2009-11-05 20:45   ` Gertjan van Wingerde
2009-11-04 17:36 ` [PATCH 38/41] rt2800: add rt2800lib (part two) Bartlomiej Zolnierkiewicz
2009-11-05 19:10   ` Ivo van Doorn
2009-11-05 20:50   ` Gertjan van Wingerde
2009-11-04 17:36 ` [PATCH 39/41] rt2x00: move REGISTER_BUSY_* definitions to rt2x00.h Bartlomiej Zolnierkiewicz
2009-11-05 19:10   ` Ivo van Doorn
2009-11-05 20:51   ` Gertjan van Wingerde
2009-11-04 17:36 ` [PATCH 40/41] rt2800: add rt2800lib (part three) Bartlomiej Zolnierkiewicz
2009-11-05 19:11   ` Ivo van Doorn
2009-11-05 20:56   ` Gertjan van Wingerde
2009-11-04 17:37 ` [PATCH 41/41] rt2800: add rt2800lib (part four) Bartlomiej Zolnierkiewicz
2009-11-05 19:12   ` Ivo van Doorn
2009-11-05 20:57   ` Gertjan van Wingerde
2009-11-04 20:19 ` [PATCH 00/41] rewritten rt2800 drivers Gertjan van Wingerde
2009-11-04 22:55   ` Julian Calaby
2009-11-06 18:15     ` Bartlomiej Zolnierkiewicz
2009-11-05 20:59   ` Gertjan van Wingerde
2009-11-05 21:06     ` Luis R. Rodriguez
2009-11-05 21:17       ` Gertjan van Wingerde
2009-11-06 16:28         ` Bartlomiej Zolnierkiewicz
2009-11-06 19:56           ` Gertjan van Wingerde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20091104173357.28463.50170.sendpatchset@localhost.localdomain \
    --to=bzolnier@gmail.com \
    --cc=gwingerde@gmail.com \
    --cc=ivdoorn@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).