From: Kalle Valo <kalle.valo@iki.fi>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 04/16] wl1251: Implement delayed entry into ELP mode
Date: Tue, 17 Nov 2009 18:48:37 +0200 [thread overview]
Message-ID: <20091117164836.2236.55890.stgit@tikku> (raw)
In-Reply-To: <20091117164614.2236.8543.stgit@tikku>
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Implement (slightly) delayed entry into ELP. This will cure several
problems:
- It works around a firmware race condition if ELP is entered too fast
after commands (resulting in ELP timeout -traces)
- It will reduce the number of sleep-wake cycles between already
scheduled events such as interrupts and tx, hence improving
performance (less delay in switching between RX and TX)
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com>
Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
---
drivers/net/wireless/wl12xx/wl1251.h | 2 ++
drivers/net/wireless/wl12xx/wl1251_main.c | 1 +
drivers/net/wireless/wl12xx/wl1251_ps.c | 34 +++++++++++++++++++++++++----
drivers/net/wireless/wl12xx/wl1251_ps.h | 1 +
4 files changed, 33 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/wl1251.h b/drivers/net/wireless/wl12xx/wl1251.h
index fc2871c..a839466 100644
--- a/drivers/net/wireless/wl12xx/wl1251.h
+++ b/drivers/net/wireless/wl12xx/wl1251.h
@@ -354,6 +354,8 @@ struct wl1251 {
/* is firmware in elp mode */
bool elp;
+ struct delayed_work elp_work;
+
/* we can be in psm, but not in elp, we have to differentiate */
bool psm;
diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index 900e6e2..b5e3bdb 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -1367,6 +1367,7 @@ struct ieee80211_hw *wl1251_alloc_hw(void)
skb_queue_head_init(&wl->tx_queue);
INIT_WORK(&wl->filter_work, wl1251_filter_work);
+ INIT_DELAYED_WORK(&wl->elp_work, wl1251_elp_work);
wl->channel = WL1251_DEFAULT_CHANNEL;
wl->scanning = false;
wl->default_key = 0;
diff --git a/drivers/net/wireless/wl12xx/wl1251_ps.c b/drivers/net/wireless/wl12xx/wl1251_ps.c
index c3e348a..9931b19 100644
--- a/drivers/net/wireless/wl12xx/wl1251_ps.c
+++ b/drivers/net/wireless/wl12xx/wl1251_ps.c
@@ -28,17 +28,41 @@
#define WL1251_WAKEUP_TIMEOUT 2000
-/* Routines to toggle sleep mode while in ELP */
-void wl1251_ps_elp_sleep(struct wl1251 *wl)
+void wl1251_elp_work(struct work_struct *work)
{
+ struct delayed_work *dwork;
+ struct wl1251 *wl;
+
+ dwork = container_of(work, struct delayed_work, work);
+ wl = container_of(dwork, struct wl1251, elp_work);
+
+ wl1251_debug(DEBUG_PSM, "elp work");
+
+ mutex_lock(&wl->mutex);
+
if (wl->elp || !wl->psm)
- return;
+ goto out;
wl1251_debug(DEBUG_PSM, "chip to elp");
-
wl1251_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP);
-
wl->elp = true;
+
+out:
+ mutex_unlock(&wl->mutex);
+}
+
+#define ELP_ENTRY_DELAY 5
+
+/* Routines to toggle sleep mode while in ELP */
+void wl1251_ps_elp_sleep(struct wl1251 *wl)
+{
+ unsigned long delay;
+
+ if (wl->psm) {
+ cancel_delayed_work(&wl->elp_work);
+ delay = msecs_to_jiffies(ELP_ENTRY_DELAY);
+ ieee80211_queue_delayed_work(wl->hw, &wl->elp_work, delay);
+ }
}
int wl1251_ps_elp_wakeup(struct wl1251 *wl)
diff --git a/drivers/net/wireless/wl12xx/wl1251_ps.h b/drivers/net/wireless/wl12xx/wl1251_ps.h
index db036fe..c688ac5 100644
--- a/drivers/net/wireless/wl12xx/wl1251_ps.h
+++ b/drivers/net/wireless/wl12xx/wl1251_ps.h
@@ -31,6 +31,7 @@
int wl1251_ps_set_mode(struct wl1251 *wl, enum wl1251_cmd_ps_mode mode);
void wl1251_ps_elp_sleep(struct wl1251 *wl);
int wl1251_ps_elp_wakeup(struct wl1251 *wl);
+void wl1251_elp_work(struct work_struct *work);
#endif /* __WL1251_PS_H__ */
next prev parent reply other threads:[~2009-11-17 16:49 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-17 16:48 [PATCH 00/16] wl1251: beacon filter support and more Kalle Valo
2009-11-17 16:48 ` [PATCH 01/16] wl1251: Add connection monitoring configuration Kalle Valo
2009-11-17 16:48 ` [PATCH 02/16] wl1251: Enable beacon filtering with the stack Kalle Valo
2009-11-17 16:48 ` [PATCH 03/16] wl1251: Configure beacon filtering on if PSM used Kalle Valo
2009-11-17 16:48 ` Kalle Valo [this message]
2009-11-17 16:48 ` [PATCH 05/16] wl1251: allocate space for firmware with vmalloc() Kalle Valo
2009-11-17 16:48 ` [PATCH 06/16] wl1251: fix deadlock with ieee80211 beacon filter calls Kalle Valo
2009-11-17 17:01 ` Johannes Berg
2009-11-17 17:10 ` Kalle Valo
2009-11-17 16:49 ` [PATCH 07/16] wl1251: mask aid bits 14 and 15 in ps-poll template Kalle Valo
2009-11-17 16:49 ` [PATCH 08/16] wl1251: Add acx command to set tbtt and dtim period Kalle Valo
2009-11-17 16:49 ` [PATCH 09/16] wl1251: Set the correct dtim period to the firmware Kalle Valo
2009-11-17 16:49 ` [PATCH 10/16] wl1251: Increase the beacon loss timeout value and handle regain event Kalle Valo
2009-11-17 16:49 ` [PATCH 11/16] wl1251: Add IRQ looping support Kalle Valo
2009-11-17 16:49 ` [PATCH 12/16] wl1251: Filter out unwanted events Kalle Valo
2009-11-17 16:49 ` [PATCH 13/16] wl1251: Fix regression in IRQ loop handling Kalle Valo
2009-11-17 16:49 ` [PATCH 14/16] wl1251: Send null data packet with "TODS" bit set Kalle Valo
2009-11-17 16:50 ` [PATCH 15/16] wl1251: remove depcreated qual usage Kalle Valo
2009-11-17 16:50 ` [PATCH 16/16] wl1251: add NVS in EEPROM support Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091117164836.2236.55890.stgit@tikku \
--to=kalle.valo@iki.fi \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox