linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "John W. Linville" <linville@tuxdriver.com>
To: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Cc: linux-wireless@vger.kernel.org
Subject: Re: [PATCH 000/102] ath9k: add AR9003 support
Date: Tue, 13 Apr 2010 15:58:06 -0400	[thread overview]
Message-ID: <20100413195806.GD6722@tuxdriver.com> (raw)
In-Reply-To: <1270754858-26266-1-git-send-email-lrodriguez@atheros.com>

On Thu, Apr 08, 2010 at 03:25:56PM -0400, Luis R. Rodriguez wrote:
> This series adds support for a new chipset family for the ath9k driver,
> the AR9003 harware family. This family of chipsets will includes 2-stream
> and 3-stream devices. We start off by supporting only 2-streams on both
> devices. Both the 2-stream and 3-stream devices are fully functional at
> this point. We have a few more items which we will iron out as part
> of future patches but we're sending this out so that we don't stall
> development on more cleanups/etc. Our delta is already quite large.
> 
> For information of the status of this driver you can refer to:
> 
> http://wireless.kernel.org/en/users/Drivers/ath9k/todo/ar93xx
> 
> You can download an all-in-one series of all these patches here:
> 
> http://bombadil.infradead.org/~mcgrof/patches/ath9k/2010/all-04-08-v2.patch
> 
> sha1sum:
> 412524e75fb512603a31211e72ff67c635d5d04d  all-04-08-v2.patch

I started trying to apply these, but I got a lot of rejects and even
hit a file that didn't exist.  I hesitate to ask, but can we expect
a repost? :-)

John
-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

  parent reply	other threads:[~2010-04-13 20:00 UTC|newest]

Thread overview: 120+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-04-08 19:25 [PATCH 000/102] ath9k: add AR9003 support Luis R. Rodriguez
2010-04-08 19:25 ` [PATCH 001/102] ath9k_hw: start building an abstraction layer for hardware routines Luis R. Rodriguez
2010-04-08 19:25 ` [PATCH 002/102] ath9k_hw: add silicon revision macros for AR9300 Luis R. Rodriguez
2010-04-08 20:57   ` Pavel Roskin
2010-04-08 19:25 ` [PATCH 003/102] ath9k_hw: add a macro for abstracting generic timer access Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 004/102] ath9k_hw: fix a missing hex prefix for a register mask Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 005/102] ath9k_hw: add simple register abstraction for some AR9300 registers Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 006/102] ath9k_hw: add support for GPIO differences on AR9003 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 007/102] ath9k_hw: AR9003 does not have AR_RC_AHB skip its setting Luis R. Rodriguez
2010-04-08 21:18   ` Pavel Roskin
2010-04-08 21:23     ` Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 008/102] ath9k_hw: remove wrapper ath9k_hw_write_regs() Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 009/102] ath9k_hw: Move some RF ops to the private callbacks Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 010/102] ath9k_hw: skip PLL initialization on AR9003 on Power-On-Reset Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 011/102] ath9k_hw: add some comments for ath9k_set_power_network_sleep() Luis R. Rodriguez
2010-04-09 20:29   ` Pavel Roskin
2010-04-08 19:26 ` [PATCH 012/102] ath9k_hw: add a private callback for PLL control computation Luis R. Rodriguez
2010-04-13 19:54   ` John W. Linville
2010-04-13 20:15     ` Felix Fietkau
2010-04-13 21:42       ` Luis R. Rodriguez
2010-04-13 23:38         ` John W. Linville
2010-04-13 23:43           ` Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 013/102] ath9k_hw: Add the PCI IDs for AR9300 and fill up the pci_id_tables Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 014/102] ath9k_hw: Add AR9003 PHY support Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 015/102] ath9k_hw: move init config and default after chip is up Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 016/102] ath9k_hw: add the AR9003 ar9003_hw_macversion_supported() Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 017/102] ath9k_hw: enable all ANI functionality for AR9003 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 018/102] ath9k_hw: Add hw cap flag for EDMA for the AR9003 family Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 019/102] ath9k_hw: Fill few hw cap for edma Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 020/102] ath9k_hw: Add abstraction for rx enable Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 021/102] ath9k_hw: Fill rx_enable() for the AR9003 hardware family Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 022/102] ath9k_hw: Add few routines for rx edma support Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 023/102] ath9k_hw: update the chip tests for AR9003 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 024/102] ath9k_hw: prevent reset control register zeroing on AR9003 reset Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 025/102] ath9k_hw: Add AR9003 PHY register definitions Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 026/102] ath9k_hw: add common channel select helpers for ar900[23] Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 027/102] ath9k_hw: Set the channel on AR9003 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 028/102] ath9k_hw: Implement PLL control " Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 029/102] ath9k_hw: Implement spur mitigation " Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 030/102] ath9k_hw: split initvals.h by hardware family Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 031/102] ath9k_hw: run Lindent on intivals Luis R. Rodriguez
2010-04-09 20:48   ` Pavel Roskin
2010-04-09 21:32     ` Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 032/102] ath9k_hw: add initvals for the AR9003 hardware family Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 033/102] ath9k_hw: add helpers for processing the AR9003 INI Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 034/102] ath9k_hw: Split off ANI control to the PHY ops Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 035/102] ath9k_hw: add all the AR9003 PHY callbacks Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 036/102] ath9k_hw: Define tx control struct for AR9003 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 037/102] ath9k_hw: Move code which populates ds_data to ath9k_hw Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 038/102] ath9k_hw: Add abstraction to set/get link pointer Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 039/102] ath9k: Use abstraction to get " Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 040/102] ath9k: Use memcpy in ath_clone_txbuf() Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 041/102] ath9k: Remove ATH9K_TX_SW_ABORTED and introduce a bool for this purpose Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 042/102] ath9k: Make bf_desc of ath_buf opaque Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 043/102] ath9k: Add Rx EDMA support Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 044/102] ath9k_hw: Split out the function for reading the noise floor Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 045/102] ath9k_hw: Get rid of eep_map and reorganize the functions Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 046/102] ath9k_hw: add a helper for Power Amplifier calibration for AR9002 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 047/102] ath9k_hw: add a helper for the OLC tem compensation " Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 048/102] ath9k_hw: rename PA calib for AR9287 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 049/102] ath9k_hw: shift code for AR9280 OLC temp comp Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 050/102] ath9k_hw: move the AR9280 OLC temp comp to its own helper Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 051/102] ath9k_hw: simplify OLC temp compensation for AR9002 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 052/102] ath9k_hw: rename the PA calib routines to match their families Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 053/102] ath9k_hw: rename getNoiseFloorThresh() to ath9k_hw_loadnf() Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 054/102] ath9k_hw: move the cal AR9100 calibration settings Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 055/102] ath9k_hw: split calib code by hardware families Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 056/102] ath9k_hw: add the AR9003 ar9003_hw_init_cal callback Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 057/102] ath9k_hw: add the config_pci_powersave AR9003 callback Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 058/102] ath9k_hw: split the generic hardware code by hardware family Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 059/102] ath9k_hw: move the cck channel 14 INI to the AR9002 hw code Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 060/102] ath9k_hw: move TX/RX gain INI stuff to its own hardware family code Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 061/102] ath9k_hw: Abstract the routine which returns interrupt status Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 062/102] ath9k_hw: Initialize interrupt mask for AR9003 Luis R. Rodriguez
2010-04-08 19:26 ` [PATCH 063/102] ath9k_hw: abstract the AR_PHY_AGC_CONTROL register access Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 064/102] ath9k_hw: abstract loading noisefloor Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 065/102] ath9k_hw: fill in the callbacks for calibration for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 066/102] ath9k_hw: add a helper for changing the TX/RX masks Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 067/102] ath9k_hw: complete AR9003 calibration Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 068/102] ath9k_hw: rename eep_AR9287_ops to eep_ar9287_ops Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 069/102] ath9k_hw: restore mac address reading logic Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 070/102] ath9k_hw: Implement AR9003 eeprom callbacks Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 071/102] ath9k_hw: add OFDM spur mitigation for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 072/102] ath9k_hw: Fill get_isr() " Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 073/102] ath9k_hw: move AR9280 PCI EEPROM fix to ar9002_hw.c Luis R. Rodriguez
2010-04-09 21:04   ` Pavel Roskin
2010-04-09 21:13     ` Felix Fietkau
2010-04-08 19:27 ` [PATCH 074/102] ath9k_hw: simplify the AR9280 PCI EEPROM fix Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 075/102] ath9k_hw: move the RF claim stuff to AR9002 hardware family Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 076/102] ath9k_hw: Configure Tx interrupt mitigation timer Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 077/102] ath9k_hw: add the AR9300 SREV hw name print Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 078/102] ath9k_hw: add TX/RX gain register initialization for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 079/102] ath9k_hw: Update ath9k_hw_set_dma for AR9300 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 080/102] ath9k_hw: Handle big-endian access for AR9300 EEPROM reads Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 081/102] ath9k_hw: skip asynch fifo enablement to AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 082/102] ath9k_hw: skip WEP aggregation enable code for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 083/102] ath9k_hw: Fix internal regulator setting on AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 084/102] ath9k: Load SW filtered NF values and start NF cal during full reset for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 085/102] ath9k_hw: Define abstraction for tx desc access Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 086/102] ath9k_hw: Add function to configure tx status ring buffer Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 087/102] ath9k_hw: Fill descriptor abstrations for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 088/102] ath9k: add RXLP and RXHP to debugfs counters Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 089/102] ath9k_hw: enable CRC check of descriptors for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 090/102] ath9k_hw: set cwmin and cwmax to 0 for for AR9003 upon txq reset Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 091/102] ath9k_hw: move AR9002 mac ops to its own file Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 092/102] ath9k: Setup appropriate tx desc for regular dma and edma Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 093/102] ath9k: Initialize and configure tx status for EDMA Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 094/102] ath9k_hw: Compute pointer checksum over the link descriptor Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 095/102] ath9k: Add frame onto hw tx fifo for edma Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 096/102] mac80211: add LDPC control flag Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 097/102] ath9k_hw: add LDPC support for AR9003 Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 098/102] ath9k: add LDPC support Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 099/102] ath9k: Enable TXOK and TXERR interrupts for TX EDMA Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 100/102] ath9k: Handle Tx interrupt for EDMA Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 101/102] ath9k_hw: Abort rx if hw is not coming out of full sleep in reset Luis R. Rodriguez
2010-04-08 19:27 ` [PATCH 102/102] ath9k_hw: add the PCI ID for the first AR9300 device Luis R. Rodriguez
2010-04-09 21:12 ` [PATCH 000/102] ath9k: add AR9003 support Pavel Roskin
2010-04-12 19:44   ` Luis R. Rodriguez
2010-04-13 19:58 ` John W. Linville [this message]
2010-04-13 20:08   ` Felix Fietkau

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100413195806.GD6722@tuxdriver.com \
    --to=linville@tuxdriver.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=lrodriguez@atheros.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).