From: Bruno Randolf <br1@einfach.org>
To: johannes@sipsolutions.net, linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org, holgerschurig@gmail.com
Subject: [PATCH 1/3] cfg80211: Add nl80211 antenna configuration
Date: Wed, 12 May 2010 17:23:25 +0900 [thread overview]
Message-ID: <20100512082325.26565.46809.stgit@tt-desk> (raw)
In-Reply-To: <20100512082231.26565.16730.stgit@tt-desk>
Allow setting TX and RX antenna configuration via nl80211/cfg80211.
The antenna configuration is defined as a bitmap of allowed antennas. This
bitmap is 8 bit at the moment, each bit representing one antenna. If multiple
antennas are selected, the driver may use diversity for receive and transmit.
This allows for a simple, yet flexible configuration interface for antennas,
while drivers may reject configurations they cannot support.
Signed-off-by: Bruno Randolf <br1@einfach.org>
---
include/linux/nl80211.h | 12 +++++
include/net/cfg80211.h | 3 +
net/wireless/nl80211.c | 116 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 131 insertions(+), 0 deletions(-)
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index b7c77f9..46a2c76 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -341,6 +341,9 @@
* of any other interfaces, and other interfaces will again take
* precedence when they are used.
*
+ * @NL80211_CMD_SET_ANTENNA: Set a bitmap of antennas to use.
+ * @NL80211_CMD_GET_ANTENNA: Get antenna configuration from driver.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -441,6 +444,9 @@ enum nl80211_commands {
NL80211_CMD_SET_CHANNEL,
+ NL80211_CMD_SET_ANTENNA,
+ NL80211_CMD_GET_ANTENNA,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -725,6 +731,9 @@ enum nl80211_commands {
* @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations
* connected to this BSS.
*
+ * @NL80211_ATTR_ANTENNA_TX: Bitmap of antennas to use for transmitting.
+ * @NL80211_ATTR_ANTENNA_RX: Bitmap of antennas to use for receiving.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -882,6 +891,9 @@ enum nl80211_attrs {
NL80211_ATTR_AP_ISOLATE,
+ NL80211_ATTR_ANTENNA_TX,
+ NL80211_ATTR_ANTENNA_RX,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index b44a2e5..8861f40 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1176,6 +1176,9 @@ struct cfg80211_ops {
int (*set_cqm_rssi_config)(struct wiphy *wiphy,
struct net_device *dev,
s32 rssi_thold, u32 rssi_hyst);
+
+ int (*set_antenna)(struct wiphy *wiphy, u8 tx_ant, u8 rx_ant);
+ int (*get_antenna)(struct wiphy *wiphy, u8 *tx_ant, u8 *rx_ant);
};
/*
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index aaa1aad..29998e0 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -153,6 +153,8 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
[NL80211_ATTR_CQM] = { .type = NLA_NESTED, },
[NL80211_ATTR_LOCAL_STATE_CHANGE] = { .type = NLA_FLAG },
[NL80211_ATTR_AP_ISOLATE] = { .type = NLA_U8 },
+ [NL80211_ATTR_ANTENNA_TX] = { .type = NLA_U8 },
+ [NL80211_ATTR_ANTENNA_RX] = { .type = NLA_U8 },
};
/* policy for the attributes */
@@ -590,6 +592,8 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
NLA_PUT_U32(msg, i, NL80211_CMD_SET_WIPHY_NETNS);
}
CMD(set_channel, SET_CHANNEL);
+ CMD(set_antenna, SET_ANTENNA);
+ CMD(get_antenna, GET_ANTENNA);
#undef CMD
@@ -4963,6 +4967,106 @@ out:
return err;
}
+static int nl80211_set_antenna(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev;
+ int res;
+ u8 rx_ant = 0, tx_ant = 0;
+
+ if (!info->attrs[NL80211_ATTR_WIPHY] ||
+ !info->attrs[NL80211_ATTR_ANTENNA_TX] ||
+ !info->attrs[NL80211_ATTR_ANTENNA_RX]) {
+ return -EINVAL;
+ }
+
+ tx_ant = nla_get_u8(info->attrs[NL80211_ATTR_ANTENNA_TX]);
+ rx_ant = nla_get_u8(info->attrs[NL80211_ATTR_ANTENNA_RX]);
+
+ rtnl_lock();
+
+ rdev = cfg80211_get_dev_from_info(info);
+ if (IS_ERR(rdev)) {
+ res = -ENODEV;
+ goto unlock_rtnl;
+ }
+
+ if (!rdev->ops->set_antenna) {
+ res = -EOPNOTSUPP;
+ goto unlock_rdev;
+ }
+
+ res = rdev->ops->set_antenna(&rdev->wiphy, tx_ant, rx_ant);
+
+ unlock_rdev:
+ cfg80211_unlock_rdev(rdev);
+
+ unlock_rtnl:
+ rtnl_unlock();
+ return res;
+}
+
+static int nl80211_get_antenna(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev;
+ struct sk_buff *msg;
+ void *hdr;
+ int res;
+ u8 tx_ant, rx_ant;
+
+ if (!info->attrs[NL80211_ATTR_WIPHY])
+ return -EINVAL;
+
+ rtnl_lock();
+
+ rdev = cfg80211_get_dev_from_info(info);
+ if (IS_ERR(rdev)) {
+ res = -ENODEV;
+ goto unlock_rtnl;
+ }
+
+ if (!rdev->ops->get_antenna) {
+ res = -EOPNOTSUPP;
+ goto unlock_rdev;
+ }
+
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!msg) {
+ res = -ENOMEM;
+ goto unlock_rdev;
+ }
+
+ hdr = nl80211hdr_put(msg, info->snd_pid, info->snd_seq, 0,
+ NL80211_CMD_GET_ANTENNA);
+ if (!hdr) {
+ res = -ENOMEM;
+ goto free_msg;
+ }
+
+ res = rdev->ops->get_antenna(&rdev->wiphy, &tx_ant, &rx_ant);
+ if (res)
+ goto free_msg;
+
+ NLA_PUT_U8(msg, NL80211_ATTR_ANTENNA_TX, tx_ant);
+ NLA_PUT_U8(msg, NL80211_ATTR_ANTENNA_RX, rx_ant);
+
+ genlmsg_end(msg, hdr);
+ res = genlmsg_reply(msg, info);
+ goto unlock_rdev;
+
+ nla_put_failure:
+ res = -ENOBUFS;
+
+ free_msg:
+ nlmsg_free(msg);
+
+ unlock_rdev:
+ cfg80211_unlock_rdev(rdev);
+
+ unlock_rtnl:
+ rtnl_unlock();
+ return res;
+}
+
static struct genl_ops nl80211_ops[] = {
{
.cmd = NL80211_CMD_GET_WIPHY,
@@ -5279,6 +5383,18 @@ static struct genl_ops nl80211_ops[] = {
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
+ {
+ .cmd = NL80211_CMD_SET_ANTENNA,
+ .doit = nl80211_set_antenna,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ },
+ {
+ .cmd = NL80211_CMD_GET_ANTENNA,
+ .doit = nl80211_get_antenna,
+ .policy = nl80211_policy,
+ /* can be retrieved by unprivileged users */
+ },
};
static struct genl_multicast_group nl80211_mlme_mcgrp = {
next prev parent reply other threads:[~2010-05-12 8:23 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-12 8:23 [PATCH 0/3] antenna configuration Bruno Randolf
2010-05-12 8:23 ` Bruno Randolf [this message]
2010-05-12 8:29 ` [PATCH 1/3] cfg80211: Add nl80211 " Johannes Berg
2010-05-14 8:10 ` Bruno Randolf
2010-05-12 8:23 ` [PATCH 2/3] mac80211: Add " Bruno Randolf
2010-05-12 8:23 ` [PATCH 3/3] ath5k: Add support for " Bruno Randolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100512082325.26565.46809.stgit@tt-desk \
--to=br1@einfach.org \
--cc=holgerschurig@gmail.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox