linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bruno Randolf <br1@einfach.org>
To: linville@tuxdriver.com
Cc: ath5k-devel@lists.ath5k.org, linux-wireless@vger.kernel.org
Subject: [PATCH v2 09/20] ath5k: use ath5k_softc as driver data
Date: Wed, 19 May 2010 10:31:26 +0900	[thread overview]
Message-ID: <20100519013126.22206.12588.stgit@tt-desk> (raw)
In-Reply-To: <20100519012528.22206.77550.stgit@tt-desk>

It's our "private driver data"... It's used more often and hw is the mac80211
part. This makes more sense with the next (sysfs) patch.

Signed-off-by: Bruno Randolf <br1@einfach.org>
---
 drivers/net/wireless/ath/ath5k/base.c |   15 ++++++---------
 1 files changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 496e2db..3b43b76 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -578,7 +578,7 @@ ath5k_pci_probe(struct pci_dev *pdev,
 	spin_lock_init(&sc->block);
 
 	/* Set private data */
-	pci_set_drvdata(pdev, hw);
+	pci_set_drvdata(pdev, sc);
 
 	/* Setup interrupt handler */
 	ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
@@ -694,25 +694,23 @@ err:
 static void __devexit
 ath5k_pci_remove(struct pci_dev *pdev)
 {
-	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
-	struct ath5k_softc *sc = hw->priv;
+	struct ath5k_softc *sc = pci_get_drvdata(pdev);
 
 	ath5k_debug_finish_device(sc);
-	ath5k_detach(pdev, hw);
+	ath5k_detach(pdev, sc->hw);
 	ath5k_hw_detach(sc->ah);
 	kfree(sc->ah);
 	free_irq(pdev->irq, sc);
 	pci_iounmap(pdev, sc->iobase);
 	pci_release_region(pdev, 0);
 	pci_disable_device(pdev);
-	ieee80211_free_hw(hw);
+	ieee80211_free_hw(sc->hw);
 }
 
 #ifdef CONFIG_PM
 static int ath5k_pci_suspend(struct device *dev)
 {
-	struct ieee80211_hw *hw = pci_get_drvdata(to_pci_dev(dev));
-	struct ath5k_softc *sc = hw->priv;
+	struct ath5k_softc *sc = pci_get_drvdata(to_pci_dev(dev));
 
 	ath5k_led_off(sc);
 	return 0;
@@ -721,8 +719,7 @@ static int ath5k_pci_suspend(struct device *dev)
 static int ath5k_pci_resume(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
-	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
-	struct ath5k_softc *sc = hw->priv;
+	struct ath5k_softc *sc = pci_get_drvdata(pdev);
 
 	/*
 	 * Suspend/Resume resets the PCI configuration space, so we have to


  parent reply	other threads:[~2010-05-19  1:32 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-19  1:30 [PATCH v2 00/20] pending ath5k + antenna patches Bruno Randolf
2010-05-19  1:30 ` [PATCH v2 01/20] ath5k: add debugfs file for queue debugging Bruno Randolf
2010-05-19  1:30 ` [PATCH v2 02/20] ath5k: wake queues on reset Bruno Randolf
2010-05-20 12:51   ` [ath5k-devel] " Nick Kossifidis
2010-05-19  1:30 ` [PATCH v2 03/20] ath5k: initialize calibration timers Bruno Randolf
2010-05-20 12:48   ` Nick Kossifidis
2010-05-19  1:31 ` [PATCH v2 04/20] ath5k: move noise floor calibration into tasklet Bruno Randolf
2010-05-20 12:50   ` Nick Kossifidis
2010-05-19  1:31 ` [PATCH v2 05/20] ath5k: Stop queues only for NF calibration Bruno Randolf
2010-05-20 12:52   ` Nick Kossifidis
2010-05-19  1:31 ` [PATCH v2 06/20] ath5k: run NF calibration only every 60 seconds Bruno Randolf
2010-05-19  1:31 ` [PATCH v2 07/20] ath5k: remove ATH_TRACE macro Bruno Randolf
2010-05-20 12:56   ` Nick Kossifidis
2010-05-19  1:31 ` [PATCH v2 08/20] ath5k: clarify logic when to enable spur mitigation filter Bruno Randolf
2010-05-19  1:31 ` Bruno Randolf [this message]
2010-05-19  1:31 ` [PATCH v2 10/20] ath5k: add sysfs files for ANI parameters Bruno Randolf
2010-05-20 12:58   ` Nick Kossifidis
2010-05-19  1:31 ` [PATCH v2 11/20] ath5k: always calculate ANI listen time Bruno Randolf
2010-05-20 12:59   ` Nick Kossifidis
2010-05-19  1:31 ` [PATCH v2 12/20] ath5k: print error message if ANI levels are out of range Bruno Randolf
2010-05-19  1:31 ` [PATCH v2 13/20] cfg80211: Add nl80211 antenna configuration Bruno Randolf
2010-05-19 17:07   ` Luis R. Rodriguez
2010-05-20  0:35     ` Bruno Randolf
2010-05-20  0:51       ` [ath5k-devel] " Luis R. Rodriguez
2010-05-20  1:12         ` Bruno Randolf
2010-05-20  1:26           ` Luis R. Rodriguez
2010-05-20  2:21             ` Bruno Randolf
2010-05-20  5:17               ` Luis R. Rodriguez
2010-05-20  5:36                 ` Bruno Randolf
2010-05-20  6:43                   ` Luis R. Rodriguez
2010-05-20 22:02                     ` David Quan
2010-05-20 22:05                     ` Luis R. Rodriguez
2010-05-20 22:14                       ` Sam Ng
2010-05-20 22:24                         ` Luis R. Rodriguez
2010-05-21  1:59                       ` Bruno Randolf
2010-05-21 17:11                         ` Luis R. Rodriguez
2010-05-21 19:10                           ` Felix Fietkau
2010-05-21 20:28                             ` Luis R. Rodriguez
2010-05-24  0:45                           ` Bruno Randolf
2010-05-24  9:15                             ` RHS Linux User
2010-06-04 19:30   ` John W. Linville
2010-06-04 21:21     ` [ath5k-devel] " Luis R. Rodriguez
2010-06-04 21:53       ` Luis R. Rodriguez
2010-06-07  3:45       ` Bruno Randolf
2010-05-19  1:31 ` [PATCH v2 14/20] mac80211: Add " Bruno Randolf
2010-05-19  1:31 ` [PATCH v2 15/20] ath5k: Add support for " Bruno Randolf
2010-05-19  1:32 ` [PATCH v2 16/20] ath5k: remove setting ANI and antenna thru debugfs files Bruno Randolf
2010-05-19  1:32 ` [PATCH v2 17/20] ath5k: fix NULL pointer in antenna configuration Bruno Randolf
2010-05-19  1:32 ` [PATCH v2 18/20] ath5k: update AR5K_PHY_RESTART_DIV_GC values to match masks Bruno Randolf
2010-05-20 12:54   ` Nick Kossifidis
2010-05-19  1:32 ` [PATCH v2 19/20] ath5k: new function for setting the antenna switch table Bruno Randolf
2010-05-19  1:32 ` [PATCH v2 20/20] ath5k: no need to save/restore the default antenna Bruno Randolf
2010-05-19  1:41 ` [PATCH v2 00/20] pending ath5k + antenna patches Luis R. Rodriguez
2010-05-19 12:59 ` John W. Linville

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100519013126.22206.12588.stgit@tt-desk \
    --to=br1@einfach.org \
    --cc=ath5k-devel@lists.ath5k.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).