Linux wireless drivers development
 help / color / mirror / Atom feed
From: David Miller <davem@davemloft.net>
To: linux-wireless@vger.kernel.org
Subject: iwlagn fails to assoc with nexus one in ad-hoc mode
Date: Mon, 07 Jun 2010 21:46:12 -0700 (PDT)	[thread overview]
Message-ID: <20100607.214612.26938385.davem@davemloft.net> (raw)


When I try to associate the wireless activity light blinks like
crazy and I get kernel log dumps like the one at the end of
this email.

The nexus one uses a Broadcom BCM4328 for wireless.

Windows 7 users report the same problem with Intel wireless, and that
upgrading to the Intel wireless windows driver, version 13.1.1.1,
fixes the problem.

For example, see here:

http://code.google.com/p/android-wifi-tether/issues/detail?id=244

Can we make sure whatever got fixed in the windows driver propagates
into our Linux drivers too? :-)

Thanks!

--------------------
iwlagn 0000:03:00.0: Microcode SW error detected.  Restarting 0x2000000.
iwlagn 0000:03:00.0: Start IWL Error Log Dump:
iwlagn 0000:03:00.0: Status: 0x000212E4, count: 5
iwlagn 0000:03:00.0: Desc                               Time       data1      data2      line
iwlagn 0000:03:00.0: SYSASSERT                    (#05) 0010614736 0x00000080 0x00000010 854
iwlagn 0000:03:00.0: blink1  blink2  ilink1  ilink2
iwlagn 0000:03:00.0: 0x03870 0x03870 0x008B2 0x00000
iwlagn 0000:03:00.0: CSR values:
iwlagn 0000:03:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG)
iwlagn 0000:03:00.0:        CSR_HW_IF_CONFIG_REG: 0X00480302
iwlagn 0000:03:00.0:          CSR_INT_COALESCING: 0X00000040
iwlagn 0000:03:00.0:                     CSR_INT: 0X00000000
iwlagn 0000:03:00.0:                CSR_INT_MASK: 0X00000000
iwlagn 0000:03:00.0:           CSR_FH_INT_STATUS: 0X00000000
iwlagn 0000:03:00.0:                 CSR_GPIO_IN: 0X00000000
iwlagn 0000:03:00.0:                   CSR_RESET: 0X00000000
iwlagn 0000:03:00.0:                CSR_GP_CNTRL: 0X080403c5
iwlagn 0000:03:00.0:                  CSR_HW_REV: 0X00000024
iwlagn 0000:03:00.0:              CSR_EEPROM_REG: 0X00000000
iwlagn 0000:03:00.0:               CSR_EEPROM_GP: 0X90000004
iwlagn 0000:03:00.0:              CSR_OTP_GP_REG: 0X00060000
iwlagn 0000:03:00.0:                 CSR_GIO_REG: 0X00080046
iwlagn 0000:03:00.0:            CSR_GP_UCODE_REG: 0X00000029
iwlagn 0000:03:00.0:           CSR_GP_DRIVER_REG: 0X00000000
iwlagn 0000:03:00.0:           CSR_UCODE_DRV_GP1: 0X00000000
iwlagn 0000:03:00.0:           CSR_UCODE_DRV_GP2: 0X00000000
iwlagn 0000:03:00.0:                 CSR_LED_REG: 0X00000078
iwlagn 0000:03:00.0:        CSR_DRAM_INT_TBL_REG: 0X88034db0
iwlagn 0000:03:00.0:        CSR_GIO_CHICKEN_BITS: 0X27800200
iwlagn 0000:03:00.0:             CSR_ANA_PLL_CFG: 0X00880300
iwlagn 0000:03:00.0:           CSR_HW_REV_WA_REG: 0X0001001a
iwlagn 0000:03:00.0:        CSR_DBG_HPET_MEM_REG: 0Xffff0000
iwlagn 0000:03:00.0: FH register values:
iwlagn 0000:03:00.0:         FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X034c7900
iwlagn 0000:03:00.0:        FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X0034ccc0
iwlagn 0000:03:00.0:                  FH_RSCSR_CHNL0_WPTR: 0X00000040
iwlagn 0000:03:00.0:         FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X80819104
iwlagn 0000:03:00.0:          FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc
iwlagn 0000:03:00.0:            FH_MEM_RSSR_RX_STATUS_REG: 0X07030000
iwlagn 0000:03:00.0:    FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000
iwlagn 0000:03:00.0:                FH_TSSR_TX_STATUS_REG: 0X07ff0001
iwlagn 0000:03:00.0:                 FH_TSSR_TX_ERROR_REG: 0X00000000
iwlagn 0000:03:00.0: Start IWL Event Log Dump: display last 20 entries
iwlagn 0000:03:00.0: EVT_LOGT:0000054936:0x00000001:0353
iwlagn 0000:03:00.0: EVT_LOGT:0000054953:0x0000010f:0106
iwlagn 0000:03:00.0: EVT_LOGT:0000054955:0x00000000:0301
iwlagn 0000:03:00.0: EVT_LOGT:0000055026:0x0000000d:0353
iwlagn 0000:03:00.0: EVT_LOGT:0000055037:0x00000000:0302
iwlagn 0000:03:00.0: EVT_LOGT:0000055057:0x00000c1d:0352
iwlagn 0000:03:00.0: EVT_LOGT:0000055058:0x00000002:0353
iwlagn 0000:03:00.0: EVT_LOGT:0000055070:0x00000000:0302
iwlagn 0000:03:00.0: EVT_LOGT:0000055094:0x00000d48:0352
iwlagn 0000:03:00.0: EVT_LOGT:0000055095:0x00000003:0353
iwlagn 0000:03:00.0: EVT_LOGT:0000055157:0x0000010f:0106
iwlagn 0000:03:00.0: EVT_LOGT:0000055159:0x00000000:0302
iwlagn 0000:03:00.0: EVT_LOGT:0000055171:0x00002000:0350
iwlagn 0000:03:00.0: EVT_LOGT:0000079297:0x0000010f:0106
iwlagn 0000:03:00.0: EVT_LOGT:0000079299:0x00000000:0301
iwlagn 0000:03:00.0: EVT_LOGT:0000079679:0x00000080:0313
iwlagn 0000:03:00.0: EVT_LOGT:0000079681:0x000005b4:0501
iwlagn 0000:03:00.0: EVT_LOGT:0000081109:0x00000000:0356
iwlagn 0000:03:00.0: EVT_LOGT:0000081141:0x000002ef:0501
iwlagn 0000:03:00.0: EVT_LOGT:0000081150:0x00000000:0125
iwlagn 0000:03:00.0: Unable to find TIM Element in beacon
iwlagn 0000:03:00.0: Unable to find TIM Element in beacon
iwlagn 0000:03:00.0: index 0 already used in uCode key table.

             reply	other threads:[~2010-06-08  4:46 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-08  4:46 David Miller [this message]
2010-06-09 16:58 ` iwlagn fails to assoc with nexus one in ad-hoc mode reinette chatre
2010-06-09 17:33   ` David Miller
2010-06-09 19:10     ` reinette chatre
2010-06-09 19:12       ` David Miller
2010-06-09 19:17         ` reinette chatre
2010-06-10  1:20           ` David Miller
2010-06-09 17:53 ` Johannes Berg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100607.214612.26938385.davem@davemloft.net \
    --to=davem@davemloft.net \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox