From: Johannes Berg <johannes@sipsolutions.net>
To: John Linville <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 20/23] mac80211: change TX aggregation locking
Date: Thu, 10 Jun 2010 10:21:48 +0200 [thread overview]
Message-ID: <20100610082232.471932919@sipsolutions.net> (raw)
In-Reply-To: 20100610082128.641664439@sipsolutions.net
From: Johannes Berg <johannes.berg@intel.com>
To prepare for allowing drivers to sleep in
ampdu_action, change the locking in the TX
aggregation code to use the mutex the RX part
already uses. The spinlock is still necessary
around some code to avoid races with TX, but
now we can also synchronize_net() to avoid
getting an inconsistent sequence number.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
net/mac80211/agg-tx.c | 94 +++++++++++++++++++++++++---------------------
net/mac80211/driver-ops.h | 3 +
net/mac80211/ht.c | 8 ---
3 files changed, 58 insertions(+), 47 deletions(-)
--- wireless-testing.orig/net/mac80211/agg-tx.c 2010-06-09 17:21:16.000000000 +0200
+++ wireless-testing/net/mac80211/agg-tx.c 2010-06-09 17:21:17.000000000 +0200
@@ -6,7 +6,7 @@
* Copyright 2005-2006, Devicescape Software, Inc.
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
* Copyright 2007, Michael Wu <flamingice@sourmilk.net>
- * Copyright 2007-2009, Intel Corporation
+ * Copyright 2007-2010, Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -140,18 +140,23 @@ int ___ieee80211_stop_tx_ba_session(stru
struct tid_ampdu_tx *tid_tx = sta->ampdu_mlme.tid_tx[tid];
int ret;
- lockdep_assert_held(&sta->lock);
+ lockdep_assert_held(&sta->ampdu_mlme.mtx);
- if (WARN_ON(!tid_tx))
+ if (!tid_tx)
return -ENOENT;
+ spin_lock_bh(&sta->lock);
+
if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) {
/* not even started yet! */
rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], NULL);
+ spin_unlock_bh(&sta->lock);
call_rcu(&tid_tx->rcu_head, kfree_tid_tx);
return 0;
}
+ spin_unlock_bh(&sta->lock);
+
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "Tx BA session stop requested for %pM tid %u\n",
sta->sta.addr, tid);
@@ -269,6 +274,8 @@ void ieee80211_tx_ba_session_handle_star
u16 start_seq_num;
int ret;
+ lockdep_assert_held(&sta->ampdu_mlme.mtx);
+
/*
* While we're asking the driver about the aggregation,
* stop the AC queue so that we don't have to worry
@@ -281,10 +288,11 @@ void ieee80211_tx_ba_session_handle_star
clear_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
/*
- * This might be off by one due to a race that we can't
- * really prevent here without synchronize_net() which
- * can't be called now.
+ * make sure no packets are being processed to get
+ * valid starting sequence number
*/
+ synchronize_net();
+
start_seq_num = sta->tid_seq[tid] >> 4;
ret = drv_ampdu_action(local, sdata, IEEE80211_AMPDU_TX_START,
@@ -294,7 +302,10 @@ void ieee80211_tx_ba_session_handle_star
printk(KERN_DEBUG "BA request denied - HW unavailable for"
" tid %d\n", tid);
#endif
+ spin_lock_bh(&sta->lock);
rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], NULL);
+ spin_unlock_bh(&sta->lock);
+
ieee80211_wake_queue_agg(local, tid);
call_rcu(&tid_tx->rcu_head, kfree_tid_tx);
return;
@@ -309,7 +320,9 @@ void ieee80211_tx_ba_session_handle_star
printk(KERN_DEBUG "activated addBA response timer on tid %d\n", tid);
#endif
+ spin_lock_bh(&sta->lock);
sta->ampdu_mlme.addba_req_num[tid]++;
+ spin_unlock_bh(&sta->lock);
/* send AddBA request */
ieee80211_send_addba_request(sdata, sta->sta.addr, tid,
@@ -445,16 +458,25 @@ ieee80211_agg_splice_finish(struct ieee8
ieee80211_wake_queue_agg(local, tid);
}
-/* caller must hold sta->lock */
static void ieee80211_agg_tx_operational(struct ieee80211_local *local,
struct sta_info *sta, u16 tid)
{
- lockdep_assert_held(&sta->lock);
+ lockdep_assert_held(&sta->ampdu_mlme.mtx);
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "Aggregation is on for tid %d\n", tid);
#endif
+ drv_ampdu_action(local, sta->sdata,
+ IEEE80211_AMPDU_TX_OPERATIONAL,
+ &sta->sta, tid, NULL);
+
+ /*
+ * synchronize with TX path, while splicing the TX path
+ * should block so it won't put more packets onto pending.
+ */
+ spin_lock_bh(&sta->lock);
+
ieee80211_agg_splice_packets(local, sta->ampdu_mlme.tid_tx[tid], tid);
/*
* Now mark as operational. This will be visible
@@ -464,9 +486,7 @@ static void ieee80211_agg_tx_operational
set_bit(HT_AGG_STATE_OPERATIONAL, &sta->ampdu_mlme.tid_tx[tid]->state);
ieee80211_agg_splice_finish(local, tid);
- drv_ampdu_action(local, sta->sdata,
- IEEE80211_AMPDU_TX_OPERATIONAL,
- &sta->sta, tid, NULL);
+ spin_unlock_bh(&sta->lock);
}
void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid)
@@ -486,37 +506,35 @@ void ieee80211_start_tx_ba_cb(struct iee
return;
}
- rcu_read_lock();
+ mutex_lock(&local->sta_mtx);
sta = sta_info_get(sdata, ra);
if (!sta) {
- rcu_read_unlock();
+ mutex_unlock(&local->sta_mtx);
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "Could not find station: %pM\n", ra);
#endif
return;
}
- spin_lock_bh(&sta->lock);
+ mutex_lock(&sta->ampdu_mlme.mtx);
tid_tx = sta->ampdu_mlme.tid_tx[tid];
if (WARN_ON(!tid_tx)) {
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "addBA was not requested!\n");
#endif
- spin_unlock_bh(&sta->lock);
- rcu_read_unlock();
- return;
+ goto unlock;
}
if (WARN_ON(test_and_set_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state)))
- goto out;
+ goto unlock;
if (test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state))
ieee80211_agg_tx_operational(local, sta, tid);
- out:
- spin_unlock_bh(&sta->lock);
- rcu_read_unlock();
+ unlock:
+ mutex_unlock(&sta->ampdu_mlme.mtx);
+ mutex_unlock(&local->sta_mtx);
}
void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif,
@@ -548,21 +566,14 @@ EXPORT_SYMBOL(ieee80211_start_tx_ba_cb_i
int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
enum ieee80211_back_parties initiator)
{
- struct tid_ampdu_tx *tid_tx;
int ret;
- spin_lock_bh(&sta->lock);
- tid_tx = sta->ampdu_mlme.tid_tx[tid];
-
- if (!tid_tx) {
- ret = -ENOENT;
- goto unlock;
- }
+ mutex_lock(&sta->ampdu_mlme.mtx);
ret = ___ieee80211_stop_tx_ba_session(sta, tid, initiator);
- unlock:
- spin_unlock_bh(&sta->lock);
+ mutex_unlock(&sta->ampdu_mlme.mtx);
+
return ret;
}
@@ -627,16 +638,17 @@ void ieee80211_stop_tx_ba_cb(struct ieee
ra, tid);
#endif /* CONFIG_MAC80211_HT_DEBUG */
- rcu_read_lock();
+ mutex_lock(&local->sta_mtx);
+
sta = sta_info_get(sdata, ra);
if (!sta) {
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "Could not find station: %pM\n", ra);
#endif
- rcu_read_unlock();
- return;
+ goto unlock;
}
+ mutex_lock(&sta->ampdu_mlme.mtx);
spin_lock_bh(&sta->lock);
tid_tx = sta->ampdu_mlme.tid_tx[tid];
@@ -644,9 +656,7 @@ void ieee80211_stop_tx_ba_cb(struct ieee
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "unexpected callback to A-MPDU stop\n");
#endif
- spin_unlock_bh(&sta->lock);
- rcu_read_unlock();
- return;
+ goto unlock_sta;
}
if (tid_tx->stop_initiator == WLAN_BACK_INITIATOR)
@@ -672,8 +682,11 @@ void ieee80211_stop_tx_ba_cb(struct ieee
call_rcu(&tid_tx->rcu_head, kfree_tid_tx);
+ unlock_sta:
spin_unlock_bh(&sta->lock);
- rcu_read_unlock();
+ mutex_unlock(&sta->ampdu_mlme.mtx);
+ unlock:
+ mutex_unlock(&local->sta_mtx);
}
void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif,
@@ -714,10 +727,9 @@ void ieee80211_process_addba_resp(struct
capab = le16_to_cpu(mgmt->u.action.u.addba_resp.capab);
tid = (capab & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2;
- spin_lock_bh(&sta->lock);
+ mutex_lock(&sta->ampdu_mlme.mtx);
tid_tx = sta->ampdu_mlme.tid_tx[tid];
-
if (!tid_tx)
goto out;
@@ -751,5 +763,5 @@ void ieee80211_process_addba_resp(struct
}
out:
- spin_unlock_bh(&sta->lock);
+ mutex_unlock(&sta->ampdu_mlme.mtx);
}
--- wireless-testing.orig/net/mac80211/ht.c 2010-06-09 17:21:16.000000000 +0200
+++ wireless-testing/net/mac80211/ht.c 2010-06-09 17:21:17.000000000 +0200
@@ -6,7 +6,7 @@
* Copyright 2005-2006, Devicescape Software, Inc.
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
* Copyright 2007, Michael Wu <flamingice@sourmilk.net>
- * Copyright 2007-2008, Intel Corporation
+ * Copyright 2007-2010, Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -136,11 +136,7 @@ void ieee80211_ba_session_work(struct wo
___ieee80211_stop_rx_ba_session(
sta, tid, WLAN_BACK_RECIPIENT,
WLAN_REASON_QSTA_TIMEOUT);
- }
- mutex_unlock(&sta->ampdu_mlme.mtx);
- spin_lock_bh(&sta->lock);
- for (tid = 0; tid < STA_TID_NUM; tid++) {
tid_tx = sta->ampdu_mlme.tid_tx[tid];
if (!tid_tx)
continue;
@@ -152,7 +148,7 @@ void ieee80211_ba_session_work(struct wo
___ieee80211_stop_tx_ba_session(sta, tid,
WLAN_BACK_INITIATOR);
}
- spin_unlock_bh(&sta->lock);
+ mutex_unlock(&sta->ampdu_mlme.mtx);
}
void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata,
--- wireless-testing.orig/net/mac80211/driver-ops.h 2010-06-09 17:21:16.000000000 +0200
+++ wireless-testing/net/mac80211/driver-ops.h 2010-06-09 17:21:17.000000000 +0200
@@ -349,6 +349,9 @@ static inline int drv_ampdu_action(struc
u16 *ssn)
{
int ret = -EOPNOTSUPP;
+
+ might_sleep();
+
local_bh_disable();
if (local->ops->ampdu_action)
ret = local->ops->ampdu_action(&local->hw, &sdata->vif, action,
next prev parent reply other threads:[~2010-06-10 8:26 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-10 8:21 [PATCH 00/23] aggregation locking rework Johannes Berg
2010-06-10 8:21 ` [PATCH 01/23] mac80211: simplify station/aggregation code Johannes Berg
2010-06-10 8:21 ` [PATCH 02/23] mac80211: use common skb queue Johannes Berg
2010-06-10 8:21 ` [PATCH 03/23] mac80211: use common work struct Johannes Berg
2010-06-10 8:21 ` [PATCH 04/23] mac80211: use common work function Johannes Berg
2010-06-10 8:21 ` [PATCH 05/23] mac80211: common work skb freeing Johannes Berg
2010-06-10 8:21 ` [PATCH 06/23] mac80211: pull mgmt frame rx into rx handler Johannes Berg
2010-06-10 8:21 ` [PATCH 07/23] mac80211: always process blockack action from workqueue Johannes Berg
2010-06-10 8:21 ` [PATCH 08/23] mac80211: move blockack stop due to fragmentation Johannes Berg
2010-06-10 8:21 ` [PATCH 09/23] mac80211: move aggregation callback processing Johannes Berg
2010-06-10 8:21 ` [PATCH 10/23] mac80211: use RCU for RX aggregation Johannes Berg
2010-06-10 8:21 ` [PATCH 11/23] mac80211: use RCU for TX aggregation Johannes Berg
2010-06-10 8:21 ` [PATCH 12/23] mac80211: remove non-irqsafe aggregation callbacks Johannes Berg
2010-06-10 8:21 ` [PATCH 13/23] mac80211: refcount aggregation queue stop Johannes Berg
2010-06-10 8:21 ` [PATCH 14/23] mac80211: make TX aggregation start/stop request async Johannes Berg
2010-06-10 8:21 ` [PATCH 15/23] mac80211: move BA session work Johannes Berg
2010-06-10 8:21 ` [PATCH 16/23] mac80211: defer RX agg session teardown to work Johannes Berg
2010-06-10 8:21 ` [PATCH 17/23] mac80211: fix RX aggregation timer Johannes Berg
2010-06-10 8:21 ` [PATCH 18/23] mac80211: change RX aggregation locking Johannes Berg
2010-06-10 8:21 ` [PATCH 19/23] mac80211: defer TX agg session teardown to work Johannes Berg
2010-06-10 8:21 ` Johannes Berg [this message]
2010-06-10 8:21 ` [PATCH 21/23] mac80211: allow drivers to sleep in ampdu_action Johannes Berg
2010-06-10 8:21 ` [PATCH 22/23] mac80211: update aggregation documentation Johannes Berg
2010-06-10 8:21 ` [PATCH 23/23] mac80211: fix mgmt frame accounting Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100610082232.471932919@sipsolutions.net \
--to=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).