From: Ivo van Doorn <ivdoorn@gmail.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org, users@rt2x00.serialmonkey.com,
Helmut Schaa <helmut.schaa@googlemail.com>
Subject: [PATCH 10/17] rt2x00: Implement broad- and multicast buffering
Date: Sun, 11 Jul 2010 12:27:58 +0200 [thread overview]
Message-ID: <201007111227.58927.IvDoorn@gmail.com> (raw)
In-Reply-To: <201007111227.27070.IvDoorn@gmail.com>
From: Helmut Schaa <helmut.schaa@googlemail.com>
Although mac80211 buffers broad- and mutlicast frames for us in AP mode
we still have to send them out after a DTIM beacon. Implement this
behavior by sending out the buffered frames when the beacondone
interrupt is processed.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2x00dev.c | 32 +++++++++++++++++++++++++++++-
1 files changed, 30 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index e255725..ae0adff 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -178,6 +178,28 @@ static void rt2x00lib_intf_scheduled(struct work_struct *work)
/*
* Interrupt context handlers.
*/
+static void rt2x00lib_bc_buffer_iter(void *data, u8 *mac,
+ struct ieee80211_vif *vif)
+{
+ struct rt2x00_dev *rt2x00dev = data;
+ struct sk_buff *skb;
+
+ /*
+ * Only AP mode interfaces do broad- and multicast buffering
+ */
+ if (vif->type != NL80211_IFTYPE_AP)
+ return;
+
+ /*
+ * Send out buffered broad- and multicast frames
+ */
+ skb = ieee80211_get_buffered_bc(rt2x00dev->hw, vif);
+ while (skb) {
+ rt2x00mac_tx(rt2x00dev->hw, skb);
+ skb = ieee80211_get_buffered_bc(rt2x00dev->hw, vif);
+ }
+}
+
static void rt2x00lib_beacondone_iter(void *data, u8 *mac,
struct ieee80211_vif *vif)
{
@@ -197,9 +219,15 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)
if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
return;
+ /* send buffered bc/mc frames out for every bssid */
ieee80211_iterate_active_interfaces(rt2x00dev->hw,
- rt2x00lib_beacondone_iter,
- rt2x00dev);
+ rt2x00lib_bc_buffer_iter,
+ rt2x00dev);
+
+ /* fetch next beacon */
+ ieee80211_iterate_active_interfaces(rt2x00dev->hw,
+ rt2x00lib_beacondone_iter,
+ rt2x00dev);
}
EXPORT_SYMBOL_GPL(rt2x00lib_beacondone);
--
1.7.1.1
next prev parent reply other threads:[~2010-07-11 10:32 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-11 10:23 [PATCH 01/17] rt2x00: Limit txpower by eeprom values Ivo van Doorn
2010-07-11 10:23 ` [PATCH 02/17] rt2x00: Convert AGC value from descriptor to RSSI (dBm) Ivo van Doorn
2010-07-11 10:24 ` [PATCH 03/17] rt2x00: Rename CONFIG_DISABLE_LINK_TUNING Ivo van Doorn
2010-07-11 10:24 ` [PATCH 04/17] rt2x00: Disable link tuning while scanning Ivo van Doorn
2010-07-11 10:25 ` [PATCH 05/17] rt2x00: Fix vgc_level_reg handling Ivo van Doorn
2010-07-11 10:25 ` [PATCH 06/17] rt2x00: Implement watchdog monitoring Ivo van Doorn
2010-07-11 10:26 ` [PATCH 07/17] rt2x00: Make rt2800_write_beacon only export to GPL Ivo van Doorn
2010-07-11 10:26 ` [PATCH 08/17] rt2x00: Convert rt2x00 to use threaded interrupts Ivo van Doorn
2010-07-11 10:27 ` [PATCH 09/17] rt2x00: Allow beacon update without scheduling a work Ivo van Doorn
2010-07-11 10:27 ` Ivo van Doorn [this message]
2010-07-11 10:28 ` [PATCH 11/17] rt2x00: Use pretbtt irq for fetching beacons on rt2800pci Ivo van Doorn
2010-07-11 10:28 ` [PATCH 12/17] rt2x00: Use separate mac80211_ops for rt2800pci and rt2800usb Ivo van Doorn
2010-07-11 10:29 ` [PATCH 13/17] rt2x00: Remove set_tim callback from PCI drivers Ivo van Doorn
2010-07-11 10:29 ` [PATCH 14/17] rt2x00: Don't initialize beacon interval to 0 on rt2800 devices Ivo van Doorn
2010-07-11 10:30 ` [PATCH 15/17] rt2x00: Add missing TSF sync mode for AP operation Ivo van Doorn
2010-07-11 10:30 ` [PATCH 16/17] rt2x00: Move common firmware loading into rt2800lib Ivo van Doorn
2010-07-11 10:31 ` [PATCH 17/17] rt2x00: Move driver callback functions into the ops structure Ivo van Doorn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201007111227.58927.IvDoorn@gmail.com \
--to=ivdoorn@gmail.com \
--cc=helmut.schaa@googlemail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=users@rt2x00.serialmonkey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).