From: Christian Lamparter <chunkeey@googlemail.com>
To: "linux-wireless" <linux-wireless@vger.kernel.org>
Subject: [RFT 6/6] carl9170usb: Makefile, Kconfig files and MAINTAINERS
Date: Mon, 30 Aug 2010 22:42:19 +0200 [thread overview]
Message-ID: <201008302242.19395.chunkeey@googlemail.com> (raw)
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
---
MAINTAINERS | 1 +
drivers/net/wireless/ath/Kconfig | 1 +
drivers/net/wireless/ath/Makefile | 1 +
drivers/net/wireless/ath/carl9170/Kconfig | 37 ++++++++++++++++++++++++++++
drivers/net/wireless/ath/carl9170/Makefile | 4 +++
5 files changed, 44 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/ath/carl9170/Kconfig
create mode 100644 drivers/net/wireless/ath/carl9170/Makefile
diff --git a/MAINTAINERS b/MAINTAINERS
index 63e441b..1f10089 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1119,6 +1119,7 @@ L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/ar9170
S: Maintained
F: drivers/net/wireless/ath/ar9170/
+F: drivers/net/wireless/ath/carl9170/
ATK0110 HWMON DRIVER
M: Luca Tettamanti <kronos.it@gmail.com>
diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
index 0a75be0..92c2162 100644
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
@@ -25,5 +25,6 @@ config ATH_DEBUG
source "drivers/net/wireless/ath/ath5k/Kconfig"
source "drivers/net/wireless/ath/ath9k/Kconfig"
source "drivers/net/wireless/ath/ar9170/Kconfig"
+source "drivers/net/wireless/ath/carl9170/Kconfig"
endif
diff --git a/drivers/net/wireless/ath/Makefile b/drivers/net/wireless/ath/Makefile
index 8113a50..75c372b 100644
--- a/drivers/net/wireless/ath/Makefile
+++ b/drivers/net/wireless/ath/Makefile
@@ -1,6 +1,7 @@
obj-$(CONFIG_ATH5K) += ath5k/
obj-$(CONFIG_ATH9K_HW) += ath9k/
obj-$(CONFIG_AR9170_USB) += ar9170/
+obj-$(CONFIG_CARL9170_USB) += carl9170/
obj-$(CONFIG_ATH_COMMON) += ath.o
diff --git a/drivers/net/wireless/ath/carl9170/Kconfig b/drivers/net/wireless/ath/carl9170/Kconfig
new file mode 100644
index 0000000..cd3815a
--- /dev/null
+++ b/drivers/net/wireless/ath/carl9170/Kconfig
@@ -0,0 +1,37 @@
+config CARL9170_USB
+ tristate "Community Driver for Atheros AR9170 802.11n USB support"
+ depends on USB && MAC80211 && EXPERIMENTAL
+ select FW_LOADER
+ help
+ This is another driver for the Atheros "otus" 802.11n USB devices.
+
+ This driver provides more features than the original,
+ but it needs a special firmware (carl9170-1.fw) to do that.
+
+ The firmware can be downloaded from here:
+
+ http://wireless.kernel.org/en/users/Drivers/carl9170
+
+ If you choose to build a module, it'll be called carl9170usb.
+
+config CARL9170_LEDS
+ bool "LED Support"
+ depends on CARL9170_USB && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = CARL9170_USB)
+ default y
+ help
+ This option is necessary, if you want your device' LEDs to blink
+
+ Say Y, unless you need the LEDs for firmware debugging.
+
+config CARL9170_DEBUGFS
+ bool "Debugging (DebugFS) Support"
+ depends on CARL9170_USB && MAC80211_DEBUGFS
+ default y
+ help
+ Say Y, if you need access to carl9170usb's statistics for
+ QoS queue status, rate control, etc.
+
+config CARL9170_WPS_BUTTON
+ bool
+ depends on CARL9170_USB && (INPUT = y || INPUT = CARL9170_USB)
+ default y
diff --git a/drivers/net/wireless/ath/carl9170/Makefile b/drivers/net/wireless/ath/carl9170/Makefile
new file mode 100644
index 0000000..2fba020
--- /dev/null
+++ b/drivers/net/wireless/ath/carl9170/Makefile
@@ -0,0 +1,4 @@
+carl9170usb-objs := main.o usb.o cmd.o mac.o phy.o led.o fw.o tx.o rx.o
+carl9170usb-$(CONFIG_CARL9170_DEBUGFS) += debug.o
+
+obj-$(CONFIG_CARL9170_USB) += carl9170usb.o
--
1.7.1
next reply other threads:[~2010-08-30 20:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-30 20:42 Christian Lamparter [this message]
2010-08-30 22:45 ` [RFT 6/6] carl9170usb: Makefile, Kconfig files and MAINTAINERS Julian Calaby
2010-08-30 23:20 ` Christian Lamparter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201008302242.19395.chunkeey@googlemail.com \
--to=chunkeey@googlemail.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).