Re: A few questions about modifications in carl9170

[Ignacy Gawedzki <i@lri.fr>]

On Tue, Sep 28, 2010 at 01:01:37AM +0200, thus spake Ignacy Gawedzki:
> Yeah, sorry for the vagueness, I promise I'll grab as much info as possible
> upon next encounter of such a thing.  As I remember it, it's mainly a matter
> of the module getting suck somehow (and attempts to unload it getting stuck as
> well) and the card not being detected upon subsequent insertions anymore.

And while writing that email, I left the card plugged in the USB socket.  In
the meantime, I got the following:

  usb 5-1: no command feedback received (-110).
  carl9170 cmd: 08 01 00 00 04 40 1d 00 00 00 00 00              .....@......
  usb 5-1: restart device (6)
  ieee80211 phy1: writing reg 0x1d4004 (val 0x0) failed (-110)
  usb 5-1: device restarted successfully.

Then when I unplugged it:

  usb 5-1: USB disconnect, address 11

And finally upon modprobe -r carl9170:

  usbcore: deregistering interface driver carl9170

And now modprobe is stuck in D+. :/

I now wonder how that could possibly be due to my modifications in the driver
and mac80211 (in a nutshell: retrieve the measurement per frame from the FW
and collect it into a stats structure in the sta descriptor, which is later
retrieved from userspace through netlink).  I'll try without these and report
back if that still happens.

Thanks again.

Ignacy

-- 
:wq!