From: Holger Schurig <holgerschurig@gmail.com>
To: Jochen Friedrich <jochen@scram.de>
Cc: linux-wireless@vger.kernel.org
Subject: Re: [Patch] iw: Implement set 4addr.
Date: Mon, 4 Oct 2010 15:02:14 +0200 [thread overview]
Message-ID: <201010041502.14459.holgerschurig@gmail.com> (raw)
In-Reply-To: <4CA997A3.7080409@scram.de>
> Yes, that's the idea behind this. I'm using an OpenWRT based WLAN router
> and a Debian client with the configuration below.
Oh, I don't have much success so far.
My setup is like this:
Linux 2.6.35.4
compat-wireless-2010-10-02, using
ath5k from this
iw from git with your patch
------------------------------------------
auto lo
iface lo inet loopback
auto wlan0
iface wlan0 inet manual
pre-up iw wlan0 set 4addr on
auto eth0
iface eth0 inet manual
iface br0 inet static
address 192.168.233.197
netmask 255.255.255.0
bridge_ports eth0 wlan0
bridge_wait 0
bridge_fd 0
bridge_stp off
post-up iw wlan0 connect TEST key 0:99999
I also tried it with wpa_supplicant, again from git. The last part of the
/etc/network/interface file looked then like this:
wpa_iface wlan0
wpa_bridge br0
wpa-conf /etc/wpa_supplicant.conf
wpa-driver nl80211
... but in both cases, I didn't have much of success. I tried "tcpdump -i
wlan0 -p" (-p prevents promiscuous mode) and only saw ARP, but never an ARP
response.
I'll investigate further :-)
--
Homepage: http://www.holgerschurig.de
next prev parent reply other threads:[~2010-10-04 12:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-02 17:40 [Patch] iw: Implement set 4addr Jochen Friedrich
2010-10-04 7:15 ` Holger Schurig
2010-10-04 9:00 ` Jochen Friedrich
2010-10-04 13:02 ` Holger Schurig [this message]
2010-10-04 13:28 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201010041502.14459.holgerschurig@gmail.com \
--to=holgerschurig@gmail.com \
--cc=jochen@scram.de \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).