From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.atheros.com ([12.19.149.2]:40129 "EHLO mail.atheros.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756816Ab0JEUGp (ORCPT ); Tue, 5 Oct 2010 16:06:45 -0400 Received: from mail.atheros.com ([10.10.20.105]) by sidewinder.atheros.com for ; Tue, 05 Oct 2010 13:06:37 -0700 Date: Tue, 5 Oct 2010 13:06:43 -0700 From: "Luis R. Rodriguez" To: Gabor Juhos , Cliff Holden , Bennyam Malavazi CC: "John W. Linville" , "ath9k-devel@venema.h4ckr.net" , "linux-wireless@vger.kernel.org" , Shu Hwa Shen Subject: Re: [ath9k-devel] [PATCH] ath9k: get correct tx gain type in ath9k_hw_4k_get_eeprom Message-ID: <20101005200643.GH11831@tux> References: <1286271137-10861-1-git-send-email-juhosg@openwrt.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" In-Reply-To: <1286271137-10861-1-git-send-email-juhosg@openwrt.org> Sender: linux-wireless-owner@vger.kernel.org List-ID: On Tue, Oct 05, 2010 at 02:32:17AM -0700, Gabor Juhos wrote: > The base_eep_header_4k structure contains information that the > device supports high power tx gain table or not. However the > ath9k_hw_4k_get_eeprom function does not return that value when > it is called with EEP_TXGAIN_TYPE. This leads to that the tx gain > initialization will use the init values from the original tx gain > table even if the device inidicates that the high power table > should be used. > > Changes-licensed-under: ISC > Signed-off-by: Gabor Juhos > Signed-off-by: Shu Hwa Shen Thanks for the patch, I'm reviewing this internally, I don't see it used on our HAL for ar5416/ so just want to double check this is correct. Luis